EN 3307-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Threaded to Head,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1 100 MPa (at Ambient Temperature)/315 Degrees C

实施日期：1996-09-01

JIS H1620-1995

钛及钛合金中氧的定量分析方法

Methods for determination of oxygen in titanium and titanium alloys

适用范围：この規格は,チタン及びチタン合金中の酸素定景方法について規定する。

BS ISO 22961-2008

Titan und Titanlegierungen. Bestimmung von Eisen. Atomabsorptionsspektrometrie Titanium and titanium alloys. Determination of iron. Atomic absorption spectrometry Titane et alliages de titane. Dosage du fer. Spectrométrie d'absorption atomique

实施日期：2008-05-30

EN 4133-2009

Aerospace series. Bolts,normal hexagonal head,coarse tolerance normal shank,long thread,in titanium alloy,aluminium IVD coated. Classification:1 100 MPa (at ambient temperature) / 425 Degrees C

实施日期：2009-04-01

NF L12-812-2002

Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.

HB 8024-2002

TC16钛合金90°沉头螺钉

90°countersunk head screws in titanium alloy

适用范围：本标准规定了TC16钛合金90°沉头螺钉（以下简称螺钉）的结构和尺寸。

发布日期：2003-02-24  实施日期：2003-02-24

BS EN 4024-2009

钛合金管连接件8°30' 带止推金属丝螺母的45°弯头焊接端头

Luft-und Raumfahrt. Rohrverschraubung 8 0' aus Titanlegierung. Winkelverschraubungen 45 mit Anschwei?ende,mit Mutter mit Schubdraht Aerospace series-Pipe coupling 8 Degrees 30' in titanium alloy-Elbows...

适用范围：This standard specifies the characteristics of elbows 45°, welded end, with thrust wire nut, for pipe couplings8°30', in titanium alloy, for aerospace applications.Nominal pressure: up to 28 000 kPaTem...

实施日期：2009-08-31

NF L24-146-2010

Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC.

DIN EN 3464-2010

Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plates - 6 mm＜a≤100 mm

实施日期：2010-02-01

GB/T 28372-2012

铁合金 取样和制样总则

Ferroalloys - Sampling and preparation of samples-General rules

适用范围：本标准规定了所有种类铁合金取样和制样的总则本标准规定的方法适用于在装货或卸货时对散状和包装两种交货形式的批料取份样，同时也适用于对静止堆料交货形式的批料取份样。本标准规定了手工和机械两种取样方法．本标准与...

发布日期：2012-05-11  实施日期：2013-02-01

EN 4500-003-2012

航空航天系列 金属材料 材料标准制定和表述规则 第003部分:耐热合金的特定规则

Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Part 003:Specific rules for heat resisting alloys

实施日期：2012-10-01

EN 2870-1996

Aerospace Series. Bolts,Normal Bihexagonal Head,Close Tolerance Normal Shank,Short Thread,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1100 MPa (at Ambient Temperature) /315 Degrees C

实施日期：1996-07-01

GB 4698.2-1984

钛及钛合金化学分析方法 邻二氮杂菲光度法测定铁量

实施日期：1985-08-01

DIN EN 3304-1996

航空和航天.钛合金制、阳极氧化、MoS2润滑、小间隙、标准杆、短螺纹、100°沉孔螺钉.等级:1100MPa(在大气温度下)/315℃

Aerospace series - Screws, 100<Grad> countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at am...

适用范围：The document specifies the characteristics of screws, 100?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubri...

DIN EN 3306-1996

航空和航天.100°沉孔、标准头、分叉十字凹口、全螺纹、钛合金制、氧化处理、MoS2润滑螺钉.等级:1100MPa(在大气温度下)/315℃

Aerospace series - Screws, 100<Grad> countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient tem...

适用范围：The document specifies the characteristics of screws, 100?countersunk normal head, offset cruciform-ribbed recess, threaded to head, in titanium alloy, MoS<(Index)2> lubricated, classification 1100 MPa...

ASTM B338-2010e1

冷凝器和热交换器用钛与钛合金无缝管及焊接管的规格

Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

实施日期：2010-05-01

GB/T 3624-2010

钛及钛合金无缝管

Titanium and titanium alloy seamless tubes

适用范围：本标准规定了钦及钦合金无缝管的要求、试验方法、检验规则和标志、包装、运输、贮存、质量证明书及合同（或订货单）内容等。本标准适用于冷轧（冷拔）方法生产的钦及钦合金无缝管，适用于一般工业用。

发布日期：2011-01-10  实施日期：2011-10-01

DIN EN 3082-2004

航空和航天 钛合金制8°30'管配件 修理用带焊接端的屏管

Aerospace series - Pipe coupling 8<Grad>30' in titanium alloy - Unions, bulkhead, with weld end, for repair

适用范围：This standard specifies the characteristics of bulkhead welded unions of the 8?0' pipe coupling system in titanium alloy for aerospace application. They shall be used as repair couplings to replace EN ...

BS EN 3855-2002

钛合金TI-P64001,球形,60度管连接器 盖

Luft-und Raumfahrt. Rohrverschraubungen mit Kugelbuchsen,60 aus Titanlegierung TI-P64001. Kugelstopfen Pipe couplings,60 degree,spherical,in titanium alloy TI-P64001 Caps Serie aerospatiale. Raccords s...

适用范围：To be read in conjunction with EN 3851, EN 3852, EN 3853

实施日期：2002-12-02

EN 3683-2007

Aerospace series. Test methods. Titanium alloy wrought products. Determination of primary a content. Point count method and line intercept method

实施日期：2007-03-01