NF L43-390-2002

Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long.

GB 4698.3-1984

钛及钛合金化学分析方法 钼蓝光度法测定硅量

实施日期：1985-08-01

BS TA 54-1973

Schmiedematerial aus Titan-Kupferlegierung (Zugfestigkeit 650-880 N/mm2) (Hoechstprofil 75 mm). Spezifikation Specification for Forging Stock of Titanium-Copper Alloy-(Tensile Strength 650-880 N/mm2) (Limiting Ruling Section 75 mm) Materiau a forger en alliage titane-cuivre (resistance a la traction 650-880 N/mm2) (section limite 75 mm). Specification AMD 3435:December 1980

实施日期：1973-04-30

DIN EN 4186-2002

航空和航天.8°30′钛合金制管耦合器.十字型

Aerospace series - Pipe coupling 8?0<Minute> in titanium alloy - Unions, cross; German version EN 4186:2001

DIN 65289-1987

航空和宇航;肋状翼形十字槽和MJ螺纹的沉头螺钉;短螺纹,钛合金制,公称抗拉强度1100兆帕,315℃温度以下用

Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 <Grad>C

适用范围：This standard contains specifications pertinent to manufacture and use such as dimensions and designation, material, surface treatment, marking and technical specifications.#,,#

HB 5297.22-2001

钛合金化学分析方法 高频感应加热-红外吸收法测定碳含量

适用范围：本标准规定了用高频感应加热-红外吸收法测定钛合金中碳含量的方法原理、试剂及用具、仪器、分析步骤、分析结果和允许差。　　本标准适用于钛合金中碳含量的测定。　　测定范围：0.010％～0.10％。

发布日期：2001-11-15  实施日期：2002-02-01

DIN EN 3868-2007

Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001; German and English version EN 3868:2004

实施日期：2007-02-01

ISO/TR 16060-2003

金属材料焊接的破坏性试验 低倍和显微检查用蚀刻剂

Destructive tests on welds in metallic materials -- Etchants for macroscopic and microscopic examination

适用范围：ISO/TR 16060:2003 gives a non-exhaustive list of etchants that can be used for the macroscopic and microscopic examination of welds in accordance with ISO 17639 for the following groups of materials: c...

发布日期：2003-10-01  实施日期：2003-10-01

GB 4698.13-1984

钛及钛合金化学分析方法 EDTA络合滴定法测定锆量

实施日期：1985-08-01

EN 3892-2001

Aerospace series. Titanium alloy TI-W64001. Filler metal for welding

实施日期：2001-06-01

HB/Z 120-1987

钛及钛合金钨极氩弧焊工艺

发布日期：1987-09-18  实施日期：1987-10-01

DIN EN 2545-2-1995

航空和航天.钛和钛合金再熔块和铸件.交货技术条件.第2部分:再熔块

Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 2: Remelting stock; German version EN 545-2:1995

适用范围：This document specifies the particular requirements for remelting stock intended to be used for the manufacture of titanium and titanium alloy castings.

DIN EN 3976-2007

Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content; German and English version EN 3976:2006

实施日期：2007-04-01

BS EN 3306-1996

MoS2润滑的阳极氧化钛合金制头部加螺纹的翼型十字槽100°标准埋头螺钉.等级:1100 MPa(室温)/315℃

100 Senkschrauben mit Fluegelkreuzschlitz,Gewinde annaehernd bis Kopf,aus Titanlegierung,anodisiert,MoS2 geschmiert. Klasse. 1100 MPa (bei Raumtemperatur)/315°C Screws,100 Degrees Countersunk Normal He...

适用范围：This standard specifies the characteristics of screws, 100°countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS2 lubricated. Classification : 1 100 MPa <...

实施日期：1996-12-15

BS 3TA 28-2009

Schmiedematerial und Draht aus Titan-Aluminium-Vanadiumlegierung (Zugfestigkeit 1100-1300 MPa). (Hoechstprofil 20 mm). Spezifikation Specification for forging stock and wire of titanium-aluminium-vanadium alloy (Tensile strength 1 100 300 MPa) (Limiting ruling section 20 mm) Materiau a forger et fil en alliage titane-aluminium-vanadium (resistance a la traction 1100-1300 MPa) (section limite 20 mm). Specification

实施日期：2009-11-30

BS EN 3244-2001

钛合金管连接件8°30’ 双端头活接头

Luft-und Raumfahrt. Rohrverschraubung 8 0' aus Titanlegierung. Gerade Verschraubungen Pipe Coupling 8 Degrees 30' in Titanium Alloy-Unions,Double Ended Serie aerospatiale. Systeme de raccordement 8 0' ...

适用范围：This standard specifies the characteristics of strraight unions, for pipe couplings 8°30′, in titanium alloy, for aerospace applications. Nominal pressure: up to 28 000 kPa Temperature range: - 55 ℃ to...

实施日期：2001-11-14

HB 3436-1984

加工高温合金及钛合金用直柄麻花钻 ｄ＝１～１２ｍｍ

发布日期：1984-08-23  实施日期：1985-01-01

DIN EN 3688-2004

航空和航天 焊接管用钛合金T-环填充料 14000 KPa标准压力

Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14000 kPA nominal pressure

适用范围：This document specifies the characteristics of a t-ring filler that is used when welding two titanium alloy pipes together. The T-ring is manufactured from titanium alloy and is intended for use in air...

DIN 17866-1990

钛和钛合金焊接圆形管.交付技术状态

Welded circular titanium and titanium alloy tubes; technical delivery conditions

适用范围：The standard specifies the technical conditions of delivery for welded circular tubes of titanium and titanium alloy.

EN 4135-2009

Aerospace series. Bolts,normal bi-hexagonal head,coarse tolerance normal shank,medium length thread,in titanium alloy,anodized,MoS2 lubricated. Classification:1 100 MPa (at ambient temperature) / 315 Degree C

实施日期：2009-07-01