DL/T 5039-1995

水利水电工程钢闸门设计规范

Specification for design of steel gate in hydraulic and hydroeolectric engineering

适用范围：本规范适用于水利水电工程钢闸门(含拦污栅)的设计。设计钢闸门时，尚须符合现行的国家和水利水电行业标准有关规定。

实施日期：1995-09-01

BS 2HR 51-2010

Specification for high expansion heat-resisting steel billets,bars,forgings and parts (Ni 25.5,Cr 15,Ti 2,Mn 1.5,Mo 1.25,Si 0.7,V 0.3) (Solution treated at 980 Degree C)

实施日期：2010-01-31

DIN EN 10083-3-2007

Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels

实施日期：2009-01-01

GB/T 12418-1990

钢质通用集装箱修理技术要求

The technical requirements of repairs for steel general purpose containers

GB 50322-2011

粮食钢板筒仓设计规范

Code for design of grain steel silos

适用范围：本规范适用于平面形状为圆形，中心装、卸料的粮食钢板筒仓的设计。 粮食钢板筒仓的设计使用年限不应少于 25 年。

发布日期：2011-07-26  实施日期：2012-06-01

NF E25-801-2-2005

High-strength structural bolting assemblies for preloading - Part 2 : suitability test for preloading.

DIN EN ISO 2320-2009

有效力矩型钢螺母 机械和工作性能

Prevailing torque type steel nuts - Mechanical and performance properties

适用范围：This International Standard specifies the mechanical and performance properties for prevailing torque typesteel nuts when tested at an ambient temperature range of +10 ~C to +35 ~C. It includes a singl...

实施日期：2009-03-01

BS EN ISO 8752-2009

弹簧型开口直销.重负荷槽头式

Spannstifte (-hülsen). Geschlitzt,schwere Ausführung Spring-type straight pins. Slotted,heavy duty Goupilles cylindriques creuses,dites goupilles élastiques Série épaisse

适用范围：This International Standard specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, heavy duty, with nominal diameter, d1, fro...

实施日期：2009-07-31

NF T35-507-7-1997

色漆和有关产品应用前金属衬底的制备--金属喷射清洁用的磨料试验方法 第7部分:湿度的测定

Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 7 : determination of moisture.

JIS G7304-2000

弹簧用钢丝－第1部分:一般要求（ISO标准）

Steel wire for mechanical springs -- Part 1: General requirements

适用范围：1.1この規格は，コイル形状で供給されるばね用に適した，丸断面の被膜しないばね線に対する一般要求事項について規定する。1.2この規格は，家具用ばねや自動車用弁ばねに使用される被膜しない鋼線については，適用しない。

NF A36-231-2-2013

Hote-rolled flat products made of high yield strength steels for cold forming - Part 2 : technical delivery conditions for thermomechanically rolled steels

DIN EN 12560-7-2004

法兰及接头 等级命名法兰的垫圈尺寸 第7部分:钢法兰的盖金属套垫圈

VFlanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges

适用范围：This standard specifies dimensions, types, design, materials and marking requirements of covered metal jacketed gaskets.#,,#

DIN EN 755-5-2008

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form

实施日期：2008-06-01

BS EN 1439-2008

Flüssiggas-Ger?te und Ausrüstungsteile. Kontrollverfahren für ortsbewegliche,wiederbefüllbare Flaschen für Flüssiggas (LPG) vor,w?hrend und nach dem Füllen LPG equipment and accessories. Procedure for checking LPG cylinders before,during and after filling Equipements pour GPL et leurs accessoires. Procédure de vérification des bouteilles transportables et rechargeables pour GPL avant,pendant et après le remplissage

实施日期：2008-03-31

EN 2413-1995

Aerospace Series. Bolts,Shouldered,Thin Hexagonal Head,Close Tolerance Shank,Short Thread,in Alloy Steel,Cadmium Plated. Classification:1 100 MPa (at Ambient Temperature)/235 Degrees C

实施日期：1995-01-01

ISO 19959-2005

熔模铸件表面条件的视检 钢、镍合金和钴合金

Visual examination of the surface condition of investment castings -- Steel, nickel alloys and cobalt alloys

适用范围：ISO 19959:2005 specifies the acceptance criteria for the surface inspection of steel, nickel alloy and cobalt alloy investment castings by visual examination.

发布日期：2005-04-01  实施日期：2005-04-01

ASTM A490-2010a

经热处理的最小抗拉强度为150 ksi的合金钢结构螺栓规格

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

适用范围：<p id="s00002">1.1 This specification covers two types of quenched and tempered, alloy steel, heavy hex structural bolts having a tensile strength of 150 to 173 ksi.</p> <p id="s00006">1.2 These bolts ...

YB/T 444-1964

五角梅花形钢管 品种

实施日期：1966-01-01

NF L31-343-1995

Aerospace series. Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads.

BS 7870-7.2-2003

LV and MV polymeric insulated cables for use by distribution and generation utilities. Part 7:Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations. Section 7.2:Single core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring (Implementation of HD 622)

实施日期：2003-06-17