DIN EN 1964-3-2000

能运输的气瓶.额定容量从0.5～并包括150l的能重复注入运输的无缝钢气瓶的设计和结构规范;第3部分:用最大极限值Rm小于1100MPa无缝不锈钢制钢瓶

Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of capacity from 0,5 litre up to and including 150 litres - Part 3: ...

实施日期：2000-04-01

DIN EN 1439-2008

LPG equipment and accessories - Procedure for checking LPG cylinders before, during and after filling

实施日期：2008-06-01

EN ISO 9809-2-2010

Gas cylinders. Refillable seamless steel gas cylinders. Design,construction and testing. Part 2:Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa

实施日期：2010-04-01

DIN EN ISO 9809-1-2010

气瓶 可重复充装的无缝钢气瓶 设计、制造和测试 第1部分:抗拉强度低于1100MPa的淬火和回火钢瓶

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (ISO 9809-1:2010); Ge...

实施日期：2010-10-01

NF E29-785/A1-2006

Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders.

BS EN 13293-2002

可运输储气瓶 压缩、液化和溶解气体用的水容量高达0.5升和二氧化碳用的水容量高达１升的可再充装无缝正火碳锰钢储气瓶的设计和结构规范

Ortsbewegliche Gasflaschen. Konstruktion und Aufbau von wiederbefuellbaren ortsbeweglichen Gasflaschen aus nahtlosem normalgegluehtem Kohlenstoff-Mangan-Stahl mit einem Fassungsraum bis 0,5 Liter fuer ...

实施日期：2002-10-22

CJ/T 34-2002

液化石油气钢瓶涂覆规定

Coating specification for liquefied petroleum gas cylinders

实施日期：2003-06-01

EN 1964-3-2000

Transportable Gas Cylinders. Specification for the Design and Construction of Refillable Transportable Seamless Steel Gas Cylinders of Water Capacities from 0,5 Litre up to and Including 150 Litres. Part 3:Cylinders Made of Seamless Stainless Steel with a

实施日期：2000-02-01

ISO 10460-2005

气瓶 钢质可焊接气瓶 定期检验和试验

Gas cylinders welded carbon-steel gas cylinders periodic inspection and testing second edition

实施日期：2005-02-15

NF E29-788-2002

Transportable gas cylinders - Periodic inspection and maintenance of dissolved acetylene cylinders.

NF A49-901-3-2011

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3 : normalized steel cylinders.

NF A49-901-3-2000

Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l - Part 3 : cylinders made of seamless stainless steel with an Rm

NF E29-785-2002

可运输储气瓶.无缝钢储气瓶的周期性检验和测试

Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders.

NF E29-773-2009

Gas cylinders - Stamp marking.

DIN EN ISO 9809-3-2010

气瓶 可重复充装的无缝钢气瓶 设计、制造和测试 第3部分:标准化钢瓶

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010); German version EN ISO 9809-3:2010

实施日期：2010-10-01

BS EN 14638-1-2006

Ortsbewegliche Gasflaschen. Wiederbefullbare geschweisste Gefaesse mit einem Fassungsraum von nicht mehr als 150 Liter. Flaschen aus geschweisstem,austenitischen,nichtrostendem Stahl,ausgelegt nach experimentellen Verfahren Transportable gas cylinders Refillable welded receptacles of a capacity not exceeding 150 litres Part 1:Welded austenitic stainless steel cylinders made to a design justified by experimental methods Bouteilles a gaz transportables. Recipients soudes rechargeables d'une capaci

实施日期：2006-05-31

CJ/T 33-2004

液化石油气钢瓶热处理工艺评定

Technological process evaluation of heat treatment for LPG cylinders

发布日期：2004-03-25  实施日期：2004-08-01

SN/T 0302-1993

出口液化石油气钢瓶检验规程

Rules for the inspection of liquefied petroleum gas cylinders for export

实施日期：1994-05-01

ISO 13769-2007

气瓶 刻印标记

Gas cylinders. Stamp marking second edition

实施日期：2007-12-15

NF E29-738-1-2006

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1 : welded austenitic stainless steel cylinders made to a design justified by experimental methods.