BS 2HR 6-2010

Knueppel,Barren,Schmiedestuecke und Teile aus hitzefester Nickellegierung mit Chrom-Eisen-Molybdaen-Kobalt-Wolfram-Anteilen (Cr 21.7,Fe 18.5,Mo 9,Co 1.5,W 0.6). Spezifikation Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets,bars,forgings and parts (Nickel base,Cr 21.7,Fe 18.5,Mo 9,Co 1.5,W 0.6) Billettes,barres,pieces forgees et pieces en alliage resistant a la chaleur nickel-chrome-fer-molybdene-cobalt-tungstene (base nickel,Cr 21.7,Fe 18.5,Mo 9,Co

实施日期：2010-01-31

DIN EN 3381-1996

航空和航天.钛合金制、阳极氧化、MoS2润滑、小间隙、标准杆、短螺纹、标准头、100°沉孔螺钉.等级:1100MPa(在大气温度下)/315℃

Aerospace series - Screws, 100<Grad> countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated - Classification: 1100...

适用范围：The document specifies the characteristics of screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated.

YB/T 5040-2012

氧化钼 硫含量的测定 硫酸钡重量法

Molybdenum oxide-Determination of sulfur content-Gravimetric method of barium sulfate

适用范围：本标准规定了硫酸钡重量法测定氧化钼中硫含量的方法。本标准适用于氧化钼中硫含量的测定。测定范围（质量分数）：0.200％～1.00％。

发布日期：2012-11-07  实施日期：2013-03-01

ASTM B662-1994(2006)

银钼电接触材料的规格

Standard Specification for Silver-Molybdenum Electrical Contact Material

适用范围：<p>1.1 This specification covers electrical contact components made from silver-molybdenum by powder metallurgical procedures.</p><p>1.2 This specification covers compositions within the silver-molybde...

实施日期：1994-04-15

SN/T 1964-2007

出口钳铁取样规程

Rules of sampling for export ferromolybdenum

发布日期：2007-08-06  实施日期：2008-03-01

ASTM B834-2013

压力固结粉末冶金铁-镍-铬-钼(UNS N08367)和镍-铬-钼-钶(Nb)(UNS N06625)合金管法兰、配件、阀和部件规格

Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, ...

发布日期：2013-10-01  实施日期：2013-10-01

GB/T 3460-2007

钼酸铵

Ammonium molybdate

适用范围：本标准规定了钼酸铵的要求、试验方法、检验规则、标志、包装、运输、贮存及合同内容。　　本标准适用于生产仲钼酸铵和生产钼粉、钼制品业用材及其他行业所需钼酸铵。

发布日期：2007-04-30  实施日期：2007-11-01

NF S94-054-1997

Implants for surgery. Metallic materials. Part 4 : cobalt-chromium-molybdenum casting alloy.

JIS G1317-1998

钼铁分析方法

Method for chemical analysis of ferromolybdenum

DIN EN 3740-1996

航空和航天.钛合金制、阳极氧化、MoS2润滑、小间隙杆、薄六角头、带肩销钉.等级:1100MPa(在大气温度下)/315℃

Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)...

适用范围：The document specifies the characteristics of bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated.#,,#

YS/T 358.3-2011

钽铁、铌铁精矿化学分析方法 第3部分：二氧化硅量的测定 硅钼蓝分光光度法和重量法

Methods for chemical analysis of tantalite columbite concentrate-Part 3:Determination of silicon dioxide content-Silicomolybdenum blue spectrophotometry and gravimetry

适用范围：本标准规定了钽铁、铌铁精矿中二氧化硅含量的测定方法。本标准适用于钽铁、铌铁精矿中二氧化硅量的测定。方法一的测定范围为0.50%～5.00%，方法二的测定范围为>5.00%～20.00%。

发布日期：2011-12-20  实施日期：2012-07-01

GB/T 4698.3-1984

钛及钛合金化学分析方法 钼蓝光度法测定硅量

Methods for chemical analysis of titanium and titanium alloys--The molybdenum blue photometric method for the determination of silicon content

NF A06-103-1969

锰矿的化学分析 磷的分光光度法测定

Chemical analysis of manganese ores. Spectrophotometric determination of phosphorus.

实施日期：1969-10-01

JB/T 7948.8-1999

熔炼焊剂化学分析方法 钼蓝光度法测定磷量

Methods for chemical analysis of melted welding fluxes--The molybdenum blue photometric method for determination of phosphorus content

适用范围： 本标准适用于熔炼焊剂中磷量的测定。测定范围：0.010%～0.20%。 本标准遵守GB/T 1467-1978《冶金产品化学分析方法标准的总则及一般规定》。

实施日期：2000-01-01

EN 2753-1996

Aerospace Series. Nuts,Anchor,Self-Locking,Fixed,Single Lug,with Counterbore,in Alloy Steel,Cadmium Plated,MoS2 Lubricated. Classification:1100 MPa (at Ambient Temperature) / 235 Degrees C

实施日期：1996-07-01

BS 5341-7.3.1-1992

Verbrennungsmotoren. Kolbenringe. Trapezringe Piston Rings up to 200 mm Diameter for Reciprocating Internal Combustion Engines Part 7:Designs,Dimensions and Designations for Single Piece Rings Section 7.3:Keystone and Half Keystone Compression Rings Subsection 7.3.1:Specification for Keystone Rings (ISO 6624-1:1986) (E) Moteurs a combustion interne. Segments de piston. Segments trapezoi daux

实施日期：1992-01-01

BS EN 2680-2006

Luft-und Raumfahrt. Annietmuttern,selbstsichernd,schwenkbar,beiderseitiger Flansch,aus legiertem Stahl,verkadmet,MoS2-geschmiert. Klasse:900 MPa (bei Raumtemperatur) / 235°C Nuts,anchor,self-locking,floating,self-aligning,two lug,in alloy steel,cadmium plated,MoS2 lubricated Classification:900 MPa (at ambient temperature) / 235 degree C Serie aerospatiale. Ecrous a river,a freinage interne,flottants,orientables,double patte,en acier allie,cadmies,lubrifies MoS2,serie metrique. Classification:900

实施日期：2006-06-30

YS/T 555.7-2009

钼精矿化学分析方法 氧化钙量的测定 火焰原子吸收光谱法

Methods for chemical analysis of molybdenum concentrate-Determination of calcium oxide content -Flame atomic absorption spectrometry

发布日期：2009-12-04  实施日期：2010-06-01

BS HC 9-1974

Gussstuecke aus Nickel-Chrom-Molybdaenstahl (880-1080 MPa) Spezifikation Nickel-Chromium-Molybdenum Steel Castings (880-1080 MPa) Pieces en acier au nickel-chrome-molybdene (880-1080 MPa). Specification Amd 1;

实施日期：1974-01-01

NF A91-219-2002

Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions.