NF E25-400-6-2010

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2 : nuts.

PD 7777-2000

替换钢的选择和对BS 7777储罐设计与试验的影响

Alternative steel selection and its effect on design and testing of tanks to BS 7777

适用范围：Tanks (containers), Bulk storage containers, Containers, Low temperatures, Liquefied gases, Selection, Steels, Ferritic steels, Sheet materials, Design, Mechanical testing, Impact testing, Fracture, Du...

ASTM E1221-2006

测定铁素体钢平面变形裂缝-止裂韧度（KIa）的试验方法

Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness,KIa,of Ferritic Steels

适用范围：<p>1.1 This test method employs a side-grooved, crack-line-wedge-loaded specimen to obtain a rapid run-arrest segment of flat-tensile separation with a nearly straight crack front. This test method pro...

实施日期：2006-01-15

NA to BS EN 1993-1-4-2006

UK National Annex to Eurocode 3. Design of steel structures. General rules. Supplementary rules for stainless steels

实施日期：2009-02-28

ASTM A872/A872M-2007a(2012)

腐蚀环境用离心铸造铁素体/奥氏体不锈钢管规格

Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

实施日期：2007-03-01

DIN EN 1011-2-2001

焊接.金属材料焊接的推荐.第2部分:铁素体钢的弧焊

Welding - Recommendation for welding of metallic materials - Part 2: Arc welding of ferritic steels

适用范围：The document gives guidance for manual, semi-mechanical, mechanised and automatic arc welding of ferritic steels, excluding ferritic stainless steels, in all product forms.

DIN EN 10274-1999

金属材料.坠落重量磨损试验

Metallic materials - Drop weight tear test; German version EN 10274:1999

适用范围：The document specifies the drop weight tear test for metallic materials and includes a method for assessing the fracture appearance of ferritic steels.

NF A04-312-2002

Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method).

DIN EN ISO 3651-2-1998

不锈钢抗晶间腐蚀的测定.第2部分:铁氧体奥氏体和铁氧体--奥氏体(复式)不锈钢.生硫酸铜剂中进行腐蚀试验

Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric...

适用范围：The document specificies methods for the determination of the resistance to intergranular corrosion of ferritic, austenitic and ferritic-austenitic(duplex) stainless steels in a media containing sulphu...

BS EN 10274-1999

金属材料 失落重力撕裂试验

Metallic materials. Drop weight tear test

适用范围：This European Standard specifies the drop weight tear test for metallic materials and includes a method for assessing the fracture appearance of ferritic steels. Assessment can also be based on the ene...

ISO 3506-2-2009

耐腐蚀不锈钢紧固件的机械性能 第2部分;螺母

Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 2: Nuts

适用范围：ISO 3506-2:2009 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature ra...

发布日期：2009-11-01  实施日期：2009-11-01

BS 5194-1-1991

外科器械.第1部分:不锈钢规范

Surgical Instruments Part 1:Specification for Stainless Steel Renumbered as BS EN ISO 7153-1:1991;ISO 7153-1:1991

适用范围：Chemical composition of grades suitable for manufacture of surgical, dental and specific instruments for orthopaedic surgery and recommendations for choice of grade for particular applications.

实施日期：1991-01-01

ASTM A352/A352M-2006(2012)

Standard Specification for Steel Castings,Ferritic and Martensitic,for Pressure-Containing Parts,Suitable for Low-Temperature Service

实施日期：2006-03-01

DIN EN ISO 3506-3-2010

耐腐蚀不锈钢紧固件的机械性能 第3部分:紧定螺钉及类似的不受拉应力的螺纹紧固件

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress

适用范围：This document specifies for set screws and similar fasteners not under tensile stress of any shape and with nominal thread diameter between 1, 6 mm and 24 mm made of austenitic, martensitic and ferriti...

实施日期：2010-04-01

ASTM E208-2006

测定铁素体钢无塑性转变温度用坠重试验方法

Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels

适用范围：<p id="s00015">The fracture-strength transitions of ferritic steels used in the notched condition are markedly affected by temperature. For a given <span class="unicode">x201C;</span>low<span class="u...

实施日期：2006-11-15

BS EN ISO 1127-1997

不锈钢管.尺寸、公差和单位长度的规范质量

Nichtrostende Stahlrohre. Masse,Grenzabmasse und laengenbezogene Masse Stainless Steel Tubes-Dimensions,Tolerances and Conventional Masses Per Unit Length Tubes en acier inoxydable. Dimensions,toleranc...

适用范围：This International Standard specifies the diameters, thicknesses, tolerances and conventional masses per unit length of stainless steel tubes.

实施日期：1997-01-15

NF A49-201-7-2005

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7 : stainless steel tubes.

BS EN 10095-1999

耐热钢和镍合金

Hitzebestaendige Staehle und Nickellegierungen Heat Resisting Steels and Nickel Alloys Aciers et alliages de nickel refractaires

适用范围：1 This European Standard covers the grades of wrought steels and nickel alloys listed in Tables 1 to 3 which are usually employed for products, for which the main requirement is their resistance to t...

实施日期：1999-07-15

NF A49-170-4-2009

Butt-welding pipe fittings - Part 4 : wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements.

BS EN ISO 8442-4-1998

与食品有关的材料和物品.餐具和桌上凹型器皿.镀金餐具的要求

Materials and Articles in Contact with Foodstuffs-Cutlery and Table Holloware Part 4:Requirements for Gold-Plated Cutlery

适用范围：This Standard specifies the following requirements for gold plated cutlery: a) performance requirements for table cutlery (for example, knives, forks, spoons, carving sets, ladles, and other serving ...

实施日期：1998-02-15