GB/T 25343.2-2010

铁路应用 轨道车辆及其零部件的焊接 第2部分：焊接制造商的质量要求及认证

Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer

适用范围：GB/T 25343的本部分规定了焊接制造商认证等级和相关质量要求，同时还规定了焊接制造商的认证程序。 本部分适用于轨道车辆及其零部件制造和维修过程中金属材料的焊接。

发布日期：2010-11-10  实施日期：2011-03-01

CNS 10802-1984

铁路车辆用单头与双头梯形螺纹(理论值)

Single-Start and Double-Start Trapezoidal Screw Thread with Clearance for Railway Rolling Stock (Theoretical Values)

发布日期：1984-03-14  实施日期：1984-03-14

ISO 14314-2004

往复式内燃机 反向起动设备 一般安全要求

Reciprocal internal combustion engines -- Recoil starting equipment -- General safety requirements

适用范围：ISO 14314:2004 specifies the safety requirements for RIC engine re-coil starting equipment intended for use on reciprocating internal combustion engines for land, rail and marine use, excluding engines...

发布日期：2004-03-01  实施日期：2004-03-01

GB/T 28027-2011

轨道交通　供电系统和机车车辆运行匹配

Railway applications - Technical criteria for the coordination between power supply and rolling stock to achieve interoperability

适用范围：本标准制定机车车辆对设备的接受要求，主要涉及以下几方面： ― 供电系统和牵引单元之间保护原则的协调，特别是短路故障的识别； ― 一线路的安装功率与列车的需求功率之间的协调； ― 牵引单元再生制动和供电系统接受能力之间...

发布日期：2011-10-31  实施日期：2012-04-01

EN 60349-2-2001

Railway Applications - Rotating Electrical Machines for Rail and Road Vehicles Part 2: Electronic Convertor-Fed Alternating Current Motors IEC 60349-2:1993, Modified

DIN 1554-1989

铁路车辆;粗加工轮箍;宽138和143mm,粗尺寸

Rail vehicles; rough-rolled tyres; width 138 mm and 143 mm; dimensions requirements

适用范围：This standard applies to unfinished tyres, whose further finishing process by means of turning lathe is effectuated according to DIN 5573 and DIN 5574.#,,#

DIN VDE 0831-2006

铁路电气信号设备

Electric signalling systems for railways

实施日期：2006-04-01

BS EN 50155-2007

铁路设施 铁道车辆上使用的电子装置

Railway applications. Electronic equipment used on rolling stock

实施日期：2007-08-31

GB/T 27568-2011

轨道交通车辆门窗橡胶密封条

Rubber gasket for doors & windows in railway vehicles

适用范围：本标准规定了轨道交通车辆门窗橡胶密封条（以下简称密封条）的要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于地铁、轻轨、高速铁路等轨道交通车辆门窗的密封条。

发布日期：2011-12-05  实施日期：2012-05-01

DIN EN 14811-2010

Railway applications - Track - Special purpose rail - Grooved and associated construction

实施日期：2010-05-01

NF F16-001-6-2013

Railway applications - Fire protection on railway vehicles - Part 6 : fire control and management systems.

GB 7178.1-1987

铁路调车作业标准 铁路调车作业标准基本规定

实施日期：1987-06-30

DIN EN 13103-2010

Railway applications - Wheelsets and bogies - Non-powered axles - Design method; German version EN 13103:2009

实施日期：2010-08-01

DIN 30802-2-2005

传输链的转运技术 散装货车的卸载 第2部分:侧向漏斗型卸料车/卸料装置的接头

Technique of transshipment in the transportation chain - Unloading of bulk freight wagons - Part 2: Interfaces for side-discharge hopper wagon/unloading equipment

适用范围：This document applies to side-discharge hopper wagons with prescribable unloading with and without roof which are used within the scope of the railway construction and operating regulations (EBO) and t...

实施日期：2005-12-01

NF F41-020-1-2004

Railway applications - Fixed installations - D.C. switchgear - Part 1 : general.

DIN EN 50125-2-2003

铁路应用 设备的环境条件 第2部分: 固定设备

Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations

实施日期：2010-11-01

DIN EN 14067-1-2003

铁道应用 空气动力 第1部分:符号和单位

Railway applications - Aerodynamics - Part 1: Symbols and units

适用范围：This standard applies to aerodynamics for railway applications. It defines symbols and units used in formulae and calculations in the field of aerodynamics. The definitions given in this standard expla...

EN 15085-5-2007

Railway applications. Welding of railway vehicles and components. Part 5:Inspection,testing and documentation

实施日期：2007-10-01

NF F50-107-2-2006

Railway applications - Track - Aluminothermic welding of rails - Part 2 : qualification of aluminothermic welders, approval of contractors and acceptance of welds.

GB/T 7703.1-1987

铁道车辆标记一般规则

Lettering and marking of railway cars general regulations