DIN EN 2536-1995

航空和航天.铝合金的硬阳极氧化

Aerospace series - Hard anodizing of aluminium alloys; German version EN 2536:1995

DIN EN 2076-3-1990

航空航天.铝.镁合金铸件和铸锭.交货技术条件.第3部分:试制铸件和连铸件

Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 3: pre-production and production castings; german version EN 2076-3:1989

适用范围：This standard specifies the particular requirements for castings in aluminium and magnesium alloys.

NF L14-328-2005

Aerospaces series - Aluminium alloy AL-P7010- - T651 - Plate - 6 mm < a < or = 20 mm.

DIN 65260-1989

航空和航天.100°米制系列铝和铝合金通用铆钉

Aerospace; rivets, universal head, aluminium and aluminium alloys; metric series

适用范围：This standard contains specifications pertinent to manufacture and use such as dimensions and designation, material, surface treatment, marking and technical specifications.#,,#

CB 567-1977

胶管接头铝合金止回阀

适用范围：无

实施日期：1979-01-01

BS EN 2286-1990

具有自润滑衬套的铝合金法兰轴套筒规范.尺寸和负荷

Buchsen mit Flansch aus Aluminium-Legierung mit selbstschmierender Beschichtung. Masse und Belastungen Bushes Flanged,Aluminium Alloy with Self-Lubricating Liner Dimensions and Loads Bagues. epaulement...

适用范围：Characteristics of bushes for shafts and housings.

实施日期：1990-01-01

BS EN 754-8-2008

铝和铝合金.冷拔棒材和管材.出水孔管.公差,尺寸和形状

Aluminium und Aluminiumlegierungen. Gezogene Stangen und Rohre. Mit Kammerwerkzeug Stranggepresste Rohre,Grenzabma?e und Formtoleranzen Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part...

适用范围：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawnporthole tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube, see Figure 1) or ...

实施日期：2008-04-30

EN 2087-2005

Aerospace series. Aluminium Alloy AL-P2014A. T6 or T62. Clad Sheet and Strip. 0,4 mm Less Than or Equal to a Less Than or Equal to 6 mm

实施日期：2005-10-01

ASTM B398/B398M-2002(2013)

电工用6201-T81铝合金丝规格

Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes

NF L14-221-2007

Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm < or = a < or = 6 mm.

CB/T 3748-1995

船用铝合金焊接工艺评定

适用范围：本标准规定了船用铝合金的焊接工艺评定方法及评定要求。 本标准适用于船用铝合金惰性气体保护电弧焊的焊接工艺评定。

实施日期：1996-08-01

EN 4500-003-2012

航空航天系列 金属材料 材料标准制定和表述规则 第003部分:耐热合金的特定规则

Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Part 003:Specific rules for heat resisting alloys

实施日期：2012-10-01

EN ISO 15982-2002

Open end blind rivets with break pull mandrel and countersunk head AIA/AIA ISO 15982:2002

实施日期：2002-11-20

EN 2695-2005

Aerospace series Aluminium alloy AL-P6081-T6 Sheet and strip 0,3 mm Less Than or Equal to a Less Than or Equal to 6 mm

实施日期：2005-06-01

ASTM F1183-1996(2006)

铝合金链状栅栏结构规格

Standard Specification for Aluminum Alloy Chain Link Fence Fabric

适用范围：<p>1.1 This specification covers aluminum alloy chain link fence fabric for commercial, industrial, and residential uses.</p><p>1.2 The values stated in inch-pound units are to be regarded as standard....

实施日期：1996-07-10

EN ISO 8993-2010

Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method

实施日期：2010-08-01

DIN 14309-1985

带压水和抽吸密封环的铝合金A型固定联接器PN16

Aluminium alloy solid coupling type A, with sealing ring for pressure and suction purposes; nominal pressure 16

EN 4286-2005

Aluminium alloy AL-P8090-T89 Die forgings a Less Than or Equal to 125 mm

实施日期：2005-06-01

HB/Z 5218.24-2004

铝合金化学分析方法 第24部分:电解重量法测定铜含量

Methods for chemical analysis of aluminium alloys-Part 24:Determination of copper content by electrolytic gravimetric method

发布日期：2004-02-16  实施日期：2004-06-01

GB 9302-1988

铝合金窗锁

实施日期：1988-12-01