GB/T 23362.4-2009

高纯氢氧化铟化学分析方法 第4部分：铝、铁、铜、锌、镉、铅和铊量的测定 电感耦合等离子体质谱法

Methods for chemical analysis of high purity indium hydroxide - Part 4: Determination of aluminum, iron, copper, zinc, cadmium, lead and thallium content - Inductively coupled plasma mass spectrometry

适用范围：GB/T 23362的本部分规定了高纯氢氧化铟中铝、铁、铜、锌、镉、铅和铊量的测定方法。　　本部分适用于高纯氢氧化铟中铝、铁、铜、锌、镉、铅和铊量的测定。测定范围(质量分数)为铝、铁、锌、铅0.000 05%～0.004 0%，铜、镉、铊0.000 02%～0.0...

发布日期：2009-03-19  实施日期：2010-01-01

ASTM A1060/A1060M-2011e1

混凝土用普通及异型镀锌焊接钢筋的规格

Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement,Plain and Deformed,for Concrete

实施日期：2011-10-01

NY 1500.56.6-2009

农药最大残留限量 代森锰锌 其它薯类

适用范围：本标准规定了农产品中艾氏剂等44种农药的最大残留限量。本标准适用于表1所列农药对应的农产品。

发布日期：2009-04-23  实施日期：2009-05-20

ASTM A875/A875M-2010

热浸镀锌-5%铝合金钢薄板规格

Standard Specification for Steel Sheet,Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process

适用范围：<p id="s00002">1.1 This specification covers steel sheet, in coils and cut lengths, metallic-coated by the hot-dip process, with zinc-5 % aluminum alloy coating. The Zn-5Al alloy coating also contains ...

实施日期：2010-11-01

CNS 7797-1981

钢铁表面熔锌之喷敷层

Zinc Spray Coatings on Iron or Steel

实施日期：1981-08-20

BS EN 61284-1998

架空线.装配要求和试验

Freileitungen. Anforderungen und Pruefungen fuer Armaturen Overhead Lines-Requirements and Tests for Fittings Lignes aeriennes. Exigences et essais pour le material d'equipement Amd 1;CORR 13778:July 4...

适用范围：Although created for fittings above 45 kV the standard may also be applied to lower voltages and to similar fittings for substations.

实施日期：1998-03-15

BS EN 12441-6-2003

锌和锌合金 化学分析 第6部分:铝及铁含量的测定 火焰原子吸收光谱测定法

Zink und Zinklegierungen. Chemische Analyse. Bestimmung von Aluminium und Eisen. FAAS-Verfahren Zinc and zinc alloys Chemical analysis Part 6:Determination of aluminium and iron Flame atomic absorption...

适用范围：This European Standard specifies a flame atomic absorption spectrometry method in zinc and zinc alloys for the determination of aluminium and iron. It is applicable to the products specified in EN 988,...

实施日期：2003-04-01

ASTM A1063/A1063M-2011

Standard Specification for Steel Sheet,Twin-Roll Cast,Zinc-Coated (Galvanized) by the Hot-Dip Process

实施日期：2011-05-01

CNS 4916-1986

氯化橡胶系锌铬黄防锈底漆

Chlorinated Rubber Zinc Chromate Rnticorrosive Primer

发布日期：1979-07-23  实施日期：1986-04-15

BS 2W 12-1989

Drallarmes,verzinktes Kohlenstoffstahlseil (metrische und englische Einheiten). Spezifikation Preformed Zinc Coated Carbon Steel Wire Rope (Metric And Inch Series) Cable preforme en acier au carbone galvanise (series metriques et en pouces). Specification

实施日期：1989-01-01

ISO 15976-2002

具有抽芯和突头的封口抽心铆钉 - St/St#2;

Closed end blind rivets with break pull mandrel and protruding head -- St/St

适用范围：ISO 15976 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a steel body (St) and an steel mandrel ...

发布日期：2002-11-01  实施日期：2002-11-01

DIN 50451-4-2007

Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 4: Determination of 34 elements in ultra pure water by mass spectrometry with inductively coupled plasma (ICP-MS)

实施日期：2007-02-01

DIN 50988-2-1988

镀层厚度测量;通过镀层析出测定基体上锌和锡的层厚;容量分析法

Measurement of coating thickness; determination of the mass per unit area of zinc and tin-coatings on ferrous materials by dissolution of the coating material; volumetric method

适用范围：This standard describes methods for the determination of the mass per unit area of zinc- and tin-coatings on ferrous materials by dissolution of the coating material.

QB/T 1147-1991

中文打字机锌合金字

适用范围：本标准规定了中文打字机锌合金字的技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于各种类型的中文打字机的锌合金字。

发布日期：1906-06-08  实施日期：1992-01-01

HG/T 2890-1997

化学试剂 氧化锌

适用范围：本标准规定了化学试剂 氧化锌的技术要求、试验方法、检验规则、包装及标志。

实施日期：1998-01-01

CNS 1361-1983

热浸法镀锌钢片检验法

Method of test for hot-dip galvanized sheets

YB(T) 29-1986

流体输送用镀锌电焊钢管

EN 12449-2012

Copper and copper alloys. Seamless,round tubes for general purposes

实施日期：2012-04-01

BS 2L 126-1970

Barren und Gussstuecke aus Magnesiumlegierung mit Cerium-Zink-Zirkonium-Anteilen (ausgehaertet) (seltene Erden 3,0,Zn 2,3,Zr 0,6). Spezifikation Specification for Ingots and Castings of Magnesium-Cerium-Zinc-Zirconium Alloy-(Precipitation Treated) (Rare earth metals 3.0,Zn 2.3,Zr 0.6) Lingots et pieces moulees en alliage magnesium-cerium-zinc-zirconium (traitement structural) (terres rares 3,0,Zn 2,3,Zr 0,6). Specification

实施日期：1970-03-26

CNS 3547-1986

锌板

Zinc Sheet

发布日期：1973-05-09  实施日期：1986-12-26