BS EN 3379-1996

镀银耐热镍基合金NI-P101HT(沃斯帕洛尹合金)制中长螺纹紧公差柄双六角头增高螺栓.等级:1210 MPa(室温)/730℃

Zwoelfkant-Passschrauben,mittlere Gewindelaenge,aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy),fuer hohe Muttern. Klasse:1210 MPa (bei Raumtemperatur)/730°C Bolts,Double Hexagon Head,Clos...

适用范围：This standard specifies the characteristics of double hexagon headed bolts with close tolerance shank and medium length thread, in NI-P101HT, for increased height nuts, for aerospace applications. Clas...

实施日期：1996-01-01

DIN EN 3931-1998

航空和航天.镍基合金NI-B31001制,铜焊用填充带

Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing, tape; German version EN 3931:1998

ISO 19959-2005

熔模铸件表面条件的视检 钢、镍合金和钴合金

Visual examination of the surface condition of investment castings -- Steel, nickel alloys and cobalt alloys

适用范围：ISO 19959:2005 specifies the acceptance criteria for the surface inspection of steel, nickel alloy and cobalt alloy investment castings by visual examination.

发布日期：2005-04-01  实施日期：2005-04-01

ISO 7530-5-1990

镍合金 火焰原子吸收光谱法 第5部分:铁含量测定

Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 5: Determination of iron content

适用范围：The method is applicable to iron contents between 0,01 and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements, calcul...

发布日期：1990-12-01  实施日期：1990-12-01

BS EN 3921-2001

航空系列 镍基合金 Ni-B41203 硬扦焊填充金属 非晶态箔

Luft-und Raumfahrt. Nickelbasislegierung NI-B41203 (NiCr7Si5B3). Hartlot in Form von amorpher Folie Aerospace Series-Nickel Base Alloy NI-B41203 (NiCr7Si5B3)-Filler Metal for Brazing-Amorphous Foil Ser...

适用范围：This standard specifies the requirements relating to: Nickel base alloy NI-B41203 (NiCr7Si5B3) Filler metal for brazing Amorphous foil for aerospace applications.

实施日期：2001-05-15

EN 3941-2001

Aerospace Series. Nickel Base Alloy NI-B41204 (NiCr13Si4B3). Filler Metal for Brazing. Amorphous Foil

实施日期：2001-02-01

NF L10-005-1-2002

Aerospace series - Metallic materials - Part 1 : conventional designation.

BS 2HR 205-2009

Gegluehtes Band und Blech aus Nickel-Kupfer-Legierung auf Nickelbasis (Cu 31) Specification for nickel-copper alloy sheet and strip:annealed (Nickel base,Cu 31) T?les et feuillards en alliages nickel-cuivre. l'état recuit (base de nickel,Cu 31). Spécifications

实施日期：2009-11-30

BS 7455-2-1991

镍合金的分析.用火焰原子吸收光谱分析法.钴的测定方法

Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of cobalt

适用范围：For cobalt in the range 0.01% (m/m) to 4% (m/m) in nickel alloys.

BS EN 3293-2008

Luft-und Raumfahrt. T-Kopf-Passschrauben,mittlere Gewindel?nge,aus hochwarmfester Nickelbasislegierung NI-P100HT (Inconel 718),blank. Klasse:1275 MPa/650 °C Aerospace series. Bolts,T-head,close tolerance,medium thread length,in heat resisting nickel base alloy NI-P100HT (Inconel 718),uncoated. Classification:1 275 MPa/650 °C Série aérospatiale. Vis de précision. tête anti-rotation T,. filetage moyen en alliage résistant. chaud. base de nickel NI-P100HT (Inconel 718),non revêtu. Classification:12

实施日期：2008-04-30

DIN EN 2934-1996

航空和航天.T型头、长螺纹、耐热镍基合金NI-P100镀银螺栓.等级:1275MPa(大气温度)/650℃

Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 <Grad>C...

适用范围：The document contains specifications pertinent to manufacture and use as dimensions and designation, material, thread, surface treatment, marking and technical specifications.

IEC 60404-6-2003

磁性材料 第6部分:用环形试样在20Hz-200kHz频率范围测量软磁金属和粉末材料的磁性能的方法

Magnetic materials Part 6:Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specime...

适用范围：Specifies methods for the measurement of a.c. magnetic properties of materials in the frequency range 20 Hz to 200 kHz other than electrical steels and soft ferrites. The materials covered by this part...

实施日期：2003-06-01

ISO 12732-2006

金属和合金的腐蚀 用双循环法进行电化学的电位动力再活化测量(根据Cihal"s方法)

Corrosion of metals and alloys -- Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal''s method)

适用范围：ISO 12732:2006 specifies the method for measuring the degree of sensitization (DOS) in stainless steel and nickel-based alloys using the Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR...

发布日期：2006-09-01  实施日期：2006-09-01

BS EN 3943-2001

航空航天系列 镍基合金NI-B41204(NiCr13Si4B3) 硬钎焊用填充金属 粉末或糊料

Luft-und Raumfahrt. Nickelbasislegierung NI-B41204 (NiCr13FE4Si4B3). Hartlot in Form von Pulver oder Paste Aerospace series-Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3)-Filler metal for brazing-Powder ...

适用范围：This standard specifies the requirements relating to: Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) Filler metal for brazing Powder or paste for aerospace applications.

实施日期：2001-05-15

DIN 29731-6-1989

航空和宇航;沉头铆接静负荷下的铆钉设计值;单剪轧制的,铆钉材料2.4360

Aerospace; rivet design values static load, for countersunk rivet joints, single shear, dimpled; rivet material 2.4360

适用范围：This standard defices the breaking, shear and ultimate tensile loads on the individual rivet of universal rivet joints taking into account the rivet and component materials.#,,#

NF L22-034-2005

Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification : 1 550 MPa (at ambient temperature) / 650 oC.

ISO 11400-1992

镍,镍铁和镍合金--磷含量的测量--二氧磷钒钼分子吸收光谱法

Nickel, ferronickel and nickel alloys -- Determination of phosphorus content -- Phosphovanadomolybdate molecular absorption spectrometric method

适用范围：Phosphorus content can be determined in the range of 0,000 5 % (m/m) to 0,05 % (m/m). As, Cr, Hf, Nb, Si, Ta, Ti, W interfere, but the interferences can be avoided. The principle is dissolution of a te...

发布日期：1992-09-01  实施日期：1992-09-01

BS 2HC 207-1989

-Kobalt-Wolfram-Chrom-Aluminium-Tantal-Hafnium-Titan-Gusslegier ngen (Nickel mit 10,0% Co,10,0% W,9,0% Cr,5,5% Al,2,5% Ta,1,5% Hf und 1,5% Ti) Specification for Nickel-cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings. (Nick

实施日期：1989-10-31

ISO 7526-1985

镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后红外线吸收法

Nickel, ferronickel and nickel alloys -- Determination of sulfur content -- Infra-red absorption method after induction furnace combustion

适用范围：Applies to the determination of sulfur content of nickel and ferronickel in the range 0,001 to 0,3 % (m/m), and of nickel alloys in the range 0,001 to 0,1 % (m/m). Specifies principle, reagents and mat...

发布日期：1985-12-01  实施日期：1985-12-01

NF A05-315-1996

Nickel-based alloys. Determination of resistance to intergranular corrosion.