BS A 356-2000

Gewindeeinsaetze,selbstsichernd,mit MJ-Gewinde,reduzierter Flansch,geschlossene Ausfuehrung,aus metallischem Werkstoff,beschichtet oder nicht Beschichtet. Masse Inserts,Self-Locking,with MJ Threads,Reduced Flanges,Closed Type,in Metallic Material,Coated or Uncoated-Dimensions Aeronautique et espace. Douilles filetees,a freinage interne et filetage MJ,a joues reduites,du type ferme,en materiau metallique,revetues ou non revetues. Dimensions ISO 13598:2000;

实施日期：2000-04-15

NF L24-965-2007

Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components.

EN 3044-1998

Aerospace Series. Installation Holes for Inserts,Screw Thread,Helical Coil,Self-Locking. Design Standard

实施日期：1998-05-01

DIN EN 4493-2008

Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH1801 (NI-P96HT, Nimonic 90), silver plated

实施日期：2008-12-01

NF L24-055-2010

Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated.

DIN EN 4014-2006

Aerospace series - Inserts, thickwall, self- locking - Design standard; German and English version EN 4014:2004

实施日期：2006-10-01

EN 3916-2008

Aerospace series. Insert,thin wall. Salvage procedure for components

实施日期：2008-08-01

EN 3676-1998

Aerospace Series. Inserts,Thin Wall,Self-Locking. Design Standard

实施日期：1998-01-01

DIN EN 4619-2010

Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys - Installation and removal procedure; German and English version EN 4619:2010

实施日期：2010-11-01

DIN EN 4622-2010

Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated; German and English version EN 4622:2010

实施日期：2010-10-01

BS 3409-2-1966

金属丝螺纹镶件承受孔攻螺纹(统一标准粗牙螺纹和统一标准细牙螺纹)规范 .第2部分:孔径为小于1/4英寸的孔

Lochbohrungen fuer Drahtgewindeeinsaetze (UNC) und UNF-Gewinde). Spezifikation. Durchmesser unter 1/4 Zoll Specification for The tapping of holes to receive wire thread inserts (UNC and UNF threads). P...

适用范围：Limits of size for tapped holes to accommodate wire thread inserts to provide thread sizes from No. 2 to No. 12 UNC inclusive and from No. 2 to No. 12 UNF inclusive. Recommendations for general dimensi...

实施日期：1966-01-31

NF F56-344-1983

直支架或弯支架用垫片

Fixed railway installations. Equipment for overhead electric telecommunication and signalling lines. Plate for straight or elbowed stirrup clamps.

DIN V 65900-3-1992

航空航天.第3部分:自锁式线螺纹插件的使用和选择; 等同采用 AECMA-technical report TR 3540:1992

Aerospace series; use and selection of self-locking wire thread inserts; identical with AECMA-technical report TR 3540:1992

适用范围：This document sets out the main criteria for the guidance of the designer with regard to possible application of the wire thread inserts defined in standards EN 2942, EN 2944 and EN 3542. It has been p...

DIN 65451-2003

航空和宇航 带MJ螺钉的螺纹件 螺钉锁紧,耐蚀钢制,等级:900MPa/1100MPa/235℃

Aerospace; thread inserts with MJ thread, locked, screw-locking, steel; class: 900 MPa/1100 MPa/235 <Grad>C

适用范围：This standard specifies the characteristics of thread inserts, with MJ thread, locked, screw-locking, steel used together with screws and bolts of 900 MPa and 1100 MPa nominal tensile strength for temp...

BS A 354-2000

Gewindeeinsaetze,selbstsichernd,mit MJ-Gewinde,geschlossene Ausfuehrung,aus metallischem Werkstoff,beschichtet oder nicht beschichtet. Masse Inserts,with Self-Locking,with MJ Threads,Closed Type,in Metallic Material,Coated or Uncoated-Dimensions Douilles filetees,a freinage interne et filetage MJ,du type ferme,en materiau metallique,revetues ou non revetues. Dimensions ISO 13596:2000;

实施日期：2000-04-15

BS 7752-1-1994+A1-2008

Frei laufende Drahtgewindeeinsaetze. Spezifikation fuer metrische Grobgewinde nach ISO Free running type wire thread inserts. Part 1:Specification for ISO metric coarse pitch threads Insertions filetees a course libre. Specification de filetages a pas metrique approximatif ISO. AMD A1:September 30,2008

实施日期：1994-10-15

DIN EN 3913-2008

Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components

实施日期：2008-03-01

DIN 65306-1986

航空和航天. 不锈钢制带通孔的复合材料用嵌件

Aerospace; inserts for composite materials, with clearance hole, corrosion resisting steel

适用范围：This standard contains specifications pertinent to manufacture and use such as dimensions and designation, material, surface treatment, marking and technical specifications.#,,#

BS EN 2943-1998

自锁紧螺旋盘绕插件.技术规范

Draht-Gewindeeinsaetze,selbstsichemd. Technische Lieferbedingungen Inserts,Screw Thread,Helical Coil,Self-Locking-Technical Specification Filets rapportes,a freinage inteme. Specification technique

适用范围：This standard specifies the characteristics, qualification and acceptance requirements for self-locking helical coil screw thread inserts in NI-PH2801 or FE-PA3004, with or without surface coating. It ...

实施日期：1998-11-15

BS EN 3298-2008

薄壁、自锁紧嵌镶件.装配和拆卸程序

Luft-und Raumfahrt. Gewindeeins?tze,dünnwandig,selbstsichernd. Ein-und Ausbauverfahren Aerospace series. Inserts,thin wall,self-locking. Installation and removal procedure Série aérospatiale. Douilles ...

适用范围：This standard specifies the conditions of installation and removal (hole serration profile, tools, swagingprocedure) of self-locking thin wall inserts defined by EN standards, for aerospace application...

实施日期：2008-05-30