NF S31-014-2-1995

Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 2 : mounting and operating conditions for draw-off taps and mixing valves.

NF C53-213-1993

Semiconducteur convectors general requirements and line commutated convertors. Part 1-3 : transformers and reactors.

BS ISO 7790-1997

液压传动.规格为03和05型的四油口标准设计叠阀和四油口定向控制阀.紧固尺寸

Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions

适用范围：This International Standard specifies clamping dimensions of four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05, on mounting surfaces. The dimensions and sizes...

实施日期：1998-03-15

BS EN 15202-2012

LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections

发布日期：2012-05-31 

DIN EN 1113-2011

Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification; German version EN 1113:2008+A1:2011

ISO 10297-2006

移动气瓶 气瓶阀 规范和型式试验

Transportable gas cylinders -- Cylinder valves -- Specification and type testing

适用范围：ISO 10297:2006 specifies valve design, production and marking requirements, and type test methods for valves intended to be fitted to gas cylinders which convey compressed, liquefied or dissolved gases...

发布日期：2006-01-01  实施日期：2006-01-01

EN 15714-4-2009

Industrial valves. Actuators. Part 4:Hydraulic part-turn actuators for industrial valves. Basic requirements

实施日期：2009-10-01

NF E29-200-1-2013

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1 : steel flanges.

DIN 18861-3-2008

Equipment for commercial kitchens - Dishwashing facilities and sinks - Part 3: Hand rinse basin, requirements and testing

实施日期：2008-03-01

NF D18-206-3-2002

Waste fittings for sanitary appliances - Part 3 : quality control.

EN ISO 14607-2009

Non-active surgical implants. Mammary implants. Particular requirements

实施日期：2009-05-01

DIN EN 14452-2005

饮用水防回流污染的安全装置 具有进气孔和活动件DN10-DN20的断流器 D类B型

Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B

适用范围：This European standard specifies the characteristics of pipe interrupters with atmospheric vent and moving element of nominal size DN 10 to DN 20 that are suitable for use in drinking water systems at ...

实施日期：2005-08-01

BS EN 15006-2006

Metal aerosol containers. Aluminium containers. Dimensions of the 25,4 mm aperture

实施日期：2007-01-31

NF E86-512-1-2009

Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1 : safety valves for cryogenic service.

GB/T 20910-2007

热水系统用温度压力安全阀

Temperature/pressure safety valve for hot water supply system

适用范围：本标准规定了热水系统温度压力安全阀(以下简称安全阀)的术语和定义、技术要求、性能、试验方法、检验规则、标志、安装和维护。 　　本标准适用于公称尺寸DN15～DN50，流道直径不小于11.1mm，整定压力范围0.1MPa～1.1MPa，整定温度不...

发布日期：2007-04-18  实施日期：2007-11-01

DIN EN 13953-2007

LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)

实施日期：2007-06-01

GB/T 13854-2008

射流管电液伺服阀

Jet-pipe electro-hydraulic servo valve

适用范围：本标准规定了射流管电液伺服阀(以下简称伺服阀)的定义、术语、分类、基本参数、要求、试验方法、检验规则及标志、包装、运输和贮存。　　本标准适用于以液压油为介质的各类射流管流量控制电液伺服阀。其他类型射流管电液伺服阀亦可...

发布日期：2008-03-03  实施日期：2008-09-01

NF P43-021-2008

建筑物龙头.AB过盈气隙装置.一般规范

Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B.

BS EN 14420-6-2004

Hose fittings with clamp units. TW tank truck couplings

EN 16145-2012

卫生设备配件 水槽和脸盆龙头用可抽出排水口 通用技术规范

Sanitary tapware. Extractable outlets for sink and basin mixers. General technical specification

实施日期：2012-12-01