GB 12466-1990

船舶及海洋工程腐蚀与防护术语

Terminology for corrosion and protection for ship and marine engineering

NF L31-343-1995

Aerospace series. Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads.

EN ISO 3892-2001

Conversion Coatings on Metallic Materials. Determination of Coating Mass Per Unit Area. Gravimetric Methods ISO 3892:2000

实施日期：2001-07-01

NF L16-007-004-2006

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 004 : high corrosion and fluid resistance with surface preparation tolerance.

NF C61-350/A1-2007

Appliance couplers for household and similar general purposes - Part 1 : general requirements.

DIN EN ISO 16773-2-2007

Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high- impedance coated specimens - Part 2: Collection of data (ISO 16773-2:2007)

实施日期：2007-07-01

BS 1722-12-2006

栅栏.钢栅栏规范

Fences. Part 12:Specification for steel palisade fences CORR 17439:October 31,2007

适用范围：This part of BS 1722 specifies requirements for steel palisadefences and gates for general purposes (“GP” fences) in corrugatedand angle pales for heights up to 2.4 m, and for security purposes(“SP” fe...

实施日期：2006-11-30

CECS 01-2004

呋喃树脂防腐蚀工程技术规程

Technical specification for anticorrosion engineering with furan resin

适用范围：本规程适用于呋喃树脂防腐蚀工程的设计、施工及验收。

发布日期：2004-02-20  实施日期：2004-05-01

DIN 18090-1997

电梯.有防火墙的升降井的横推和直推门

Lifts - Lift landing doors (hinged, pivoted and folding) for lift walls with walls of the fire resistance class F 90

ISO 15977-2002

具有抽芯和突头的开口抽心铆钉 - AIA/St

Open end blind rivets with break pull mandrel and protruding head -- AIA/St

适用范围：ISO 15977 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body and a steel mandr...

发布日期：2002-11-01  实施日期：2002-11-01

DIN V 1201-2004

下水管道用混凝土、钢纤维混凝土和钢筋混凝土制管与管件 1型和2型 要求,试验和合格评定

Concrete Pipes and Fittings, unreinforced, steel fibre and reinforced for drains and sewers; Type 1 and Type 2; Requirements, test methods and evaluation of conformity

适用范围：This standard only applies in connection with DIN EN 1916 and contains requirements and test methods for pipes and fittings made of concrete and reinforced concrete, for which there are no specificatio...

实施日期：2004-08-01

DIN EN 40-3-1-2002

电线杆 第3-1部分:设计和验证 特性负荷规范

Lightning columns - Part 3-1: Desgn and verification - Specification for characteristic load

CNS 9135-1989

船用250V单心、二心、三心EPR绝缘PVC被覆金属网铠装电缆(250V-SPYC,250V-DPYC,250V-TPYC)及250V单心、二心、三心EPR绝缘PVC被覆金属网铠装PVC防蚀电缆(250V-SPYCY,250V-DPYCY,250V-TPYCY)

250V Single-Core, Twin-Core, Three-Core EPR Insulated PVC Sheathed Metal Netting Covered Cable (250V-SPYC, 250V-DPYC, 250V-TPYC) and PVC Anti-Corrosion Cable (250V-SPYCY, 250V-DPYCY, 250V-TPYCY) for Ma...

发布日期：1982-07-21  实施日期：1989-05-18

EN ISO 8503-5-2004

Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blastcleaned steel substrates. Part 5:Replica tape method for the determination of the surface profile (ISO 8503-5:2003)

实施日期：2004-12-01

ISO 12732-2006

金属和合金的腐蚀 用双循环法进行电化学的电位动力再活化测量(根据Cihal"s方法)

Corrosion of metals and alloys -- Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal''s method)

适用范围：ISO 12732:2006 specifies the method for measuring the degree of sensitization (DOS) in stainless steel and nickel-based alloys using the Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR...

发布日期：2006-09-01  实施日期：2006-09-01

ISO 17652-2-2003

焊接 和焊接与相关工艺有关底漆的试验 第2部分:底漆的焊接特性

Welding -- Test for shop primers in relation to welding and allied processes -- Part 2: Welding properties of shop primers

适用范围：ISO 17652-2:2003 describes tests for assessing the influence of shop primers on the weldability. The following tests are detailed. Rating test This screening test provides a method of assessing the rel...

发布日期：2003-05-01  实施日期：2003-05-01

NF M87-228-2013

Petroleum and natural gas industries - Aluminium alloy drill pipe

BS EN ISO 15984-2002

带有断裂拉伸心轴和埋头钉的开端空心铆钉 A2/A2 校正14329:2003年2月5日

Offene Blindniete mit Sollbruchdorn und Senkkopf. A2/A2 Open end blind rivets with break pull mandrel and countersunk head A2/A2 Rivets aveugles a rupture de tige a corps ouvert,a tete fraisee. A2/A2 C...

适用范围：ISO 15984 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) ...

实施日期：2002-11-20

DIN EN ISO 16348-2003

金属和其他非有机涂层.定义和外观惯语

Metallic and other anorganic coatings - Definitions and conventions concerning appearance

适用范围：This European Standard defines appearance and its associated terms and outlines the principles involved in validating appearance when it is specified as a requirement of metallic and related inorganic ...

NF A03-155-4-2007

Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings.