BS EN ISO 2106-2011

Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method

实施日期：2011-03-31

ISO 2931-2010

铝及铝合金阳极氧化 用导纳法测量阳极氧化膜封孔质量的评定

Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of admittance

发布日期：2010-07-01  实施日期：2010-07-01

ASTM D1732-2003(2013)

Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting

实施日期：2003-09-10

YS/T 587.12-2006

炭阳极用煅后石油焦检测方法 第12部分： 粒度分布的测定

Calcined coke for prebaked blocks-Testing methods-Part 12 : Determination of particle size distribution

发布日期：2006-05-25  实施日期：2006-12-01

GB/T 16166-2013

滨海电厂海水冷却水系统牺牲阳极阴极保护

Sacrificial anode cathodic protection for seawater cooling system in coastal power station

发布日期：2013-11-27  实施日期：2014-05-01

YS/T 63.2-2006

铝用碳素材料检测方法　第2部分：阴极炭块和预焙阳极　室温电阻率的测定

Carbonaceous materials used in the production of aluminium-Part 2:Cathode blocks and prebaked anodes-Determination of electrical resistivity at ambient temperature

发布日期：2006-03-07  实施日期：2006-08-01

BS 2A 29-1962

Specification for aluminium alloy hexagonal nuts (B.A and B.S.F. threads) (ordinary and slotted) for aircraft

BS EN 2284-1991

铝合金和锻铝合金硫酸阳极化规范

Schwefelsaeure. Anodisieren von Aluminium und Aluminium-Knetlegierungen Sulfuric Acid Anodizing of Aluminium and Wrought Aluminium Alloys Anodisation sulfurique de l'aluminium et des alliages d'alumini...

实施日期：1991-01-01

BS EN 61300-3-27-1997

光纤互连设备和无源元件.基本试验和测量程序.第3部分第27节:检验和测量.多路连接器插头的孔定位测量方法

Lichtwellenleiter. Verbindungselemente und passive Bauteile. Grundlegende Pruef-und Messverfahren. Untersuchungen und Messungen. Messmethode zur Bestimmung der Steckposition eines Mehrfachsteckverbinde...

实施日期：1997-09-15

DIN IEC 60384-15-2-1991

电子设备固定电容器.第15部分:分规范:固体或非固体电解质固定钽电容器.第2节:空白详细规范:非固体电解质和多孔阳极的固定钽电容器.评定等级 E

Fixed capacitors for use in electrical equipment; part 15: blanc detail specification: fixed tantalum capacitors with non-solid electrolyte and porous anode; assessement level E; identical with IEC 603...

BS 6043-3.3-2000

Kohlenstoffmaterialien fuer die Herstellung von Aluminium. Gebrannte Anoden und Kathodenbloecke. Bestimmung der Schuettdichte mit einem Dimensionsverfahren Methods of Sampling and Test for Raw Materials Used in Aluminium Manufacture-Part 3:Electrodes-Section 3.3:Determination of the Bulk Density (Apparent Density) of Cathode Blocks and Prebaked Anodes Using a Dimensions Method Produits carbones utilises pour la production de l'aluminium. Anodes cuites et blocs cathodiques. Determination de la ma

实施日期：2000-10-15

BS 2A 61-1962

Specification for aluminium alloy hexagonal headed bolts (B.A. and B.S.F. threads) for aircraft

CB 1286-1996

鱼雷铝合金壳体硬质阳极氧化膜层技术要求及检验方法

发布日期：1996-12-23  实施日期：1997-06-01

BS ISO 15906-2007

Kohlenstoffhaltige Materialien für die Produktion von Aluminium. Vorgebrannte Anoden. Bestimmung der Luftdurchl?ssigkeit Carbonaceous materials for the production of aluminium. Baked anodes. Determination of the air permeability Produits carbonés utilisés pour la production de l'aluminium. Anodes cuites. Détermination de la perméabilit l'air

实施日期：2007-06-29

EN ISO 7668-2010

Anodizing of aluminium and its alloys. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees,45 degrees,60 degrees or 85 degrees

实施日期：2010-11-01

YS/T 775.1-2011

铅阳极泥化学分析方法 第1部分：铅量的测定 Na2EDTA滴定法

Methods for chemical analysis of lead anode slime-Part 1:Determination of lead content-Na2EDTA titrimetric method

发布日期：2011-12-20  实施日期：2012-07-01

GB/T 8753-1988

铝及铝合金阳极氧化-阳极氧化膜封闭后吸附能力的损失评定 酸处理后的染色斑点试验

Anodizing of aluminium and aluminium alloys--Estimationof loss of absorptive power of anodic oxide coatings after sealing--Dye spot test with prior acid treatment

实施日期：1989-02-01

CNS 8703-1982

铝及铝合金之草酸阳极氧化处理作业

Anode Oxidation Practice by Oxalic Acid Process on Aluminium and Aluminium Alloys

发布日期：1982-04-22  实施日期：1982-04-22

CB/T 3455-1992

船用阳极屏层的设计与涂装

发布日期：1992-03-07  实施日期：1992-10-01

DIN EN 4509-2007

Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315 ℃

实施日期：2007-05-01