DIN EN 2536-1995

航空和航天.铝合金的硬阳极氧化

Aerospace series - Hard anodizing of aluminium alloys; German version EN 2536:1995

EN ISO 8993-2010

Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method

实施日期：2010-08-01

EN ISO 6581-2010

Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings

实施日期：2010-07-01

JIS H8685-2-1999

铝及铝合金的着色阳极氧化镀层的促进耐光性试验方法－第2部分:紫外线光牢度试验

Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Test for light fastness to ultra-violet light

DIN EN ISO 2128-2010

铝及铝合金阳极氧化 阳极氧化膜厚度的测定 分光束显微镜无损测定法

Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010); German version EN ISO 2128:2010

实施日期：2010-12-01

GB/T 20503-2006

铝及铝合金阳极氧化 阳极氧化膜镜面反射率和镜面光泽度的测定 20°、45°、60°、85°角度方向

Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss at angles of 20°,45°,60°or 85°

适用范围：本标准规定了使用几何角度为20°(方法A)、45°(方法B)、60°(方法C)、及85°(方法D)时，测量铝及铝合金阳极氧化膜平面样品镜面反射率和镜面光泽度的方法，以及采用窄接收角的45°测量镜面反射率的方法(方法E)。　　本标准主要适用于...

发布日期：2006-09-26  实施日期：2007-02-01

DIN EN 2808-1997

航空和航天.钛和钛合金的阳极氧化处理

Aerospace series - Anodizing of titanium and titanium alloys; German version EN 2808:1997

发布日期：1997-05-01  实施日期：1997-05-01

BS EN ISO 7668-2010

Anodisieren von Aluminium und Aluminiumlegierungen. Messung des gerichteten Reflexionsgrades und des Spiegelglanzes von anodisch erzeugten Oxidschichten bei Winkeln von 20 45 60 oder 85°Anodizing of aluminium and its alloys. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees,45 degrees,60 degrees or 85 degrees Anodisation de l'aluminium et de ses alliages. Mesurage des caractéristiques de réflectivit et de brillant spéculaires des couches

实施日期：2010-12-31

DIN EN ISO 2931-2010

铝及铝合金阳极氧化 用导纳法测量阳极氧化膜封孔质量的评定

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2010); German version EN ISO 2931:2010

实施日期：2010-12-01

DIN EN ISO 7759-2010

铝及铝合金阳极氧化 用角度仪或遮光角度仪测量铝表面反射特性

Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010); German version EN ISO 77...

实施日期：2010-12-01

BS EN ISO 7759-2010

Anodisieren von Aluminium und Aluminiumlegierungen. Messung der Reflexionseigenschaften von Aluminiumoberfl?chen mit einem Goniophotometer oder mit einem vereinfachten Goniophotometer Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer Anodisation de l'aluminium et de ses alliages. Mesurage des caractéristiques de réflectivit des surfaces d'aluminium. l'aide d'un goniophotomètre normal ou s

实施日期：2010-09-30

NF A91-474-2001

Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods.

DIN EN ISO 8251-2011

Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011); German version EN ISO 8251:2011

GB/T 8014.2-2005

铝及铝合金阳极氧化 化膜厚度的测量方法 第2部分：质量损失法

Anodizing of aluminium and its alloys—The measuring method of thickness of anodic oxide coatings—Part 2:Mass-loss method

适用范围：本部分规定了用质量损失法测定铝及铝合金阳极氧化膜单位面积质量(表面密度)，并估算氧化膜平均厚度的方法。 　　本部分适用于铜含量不大于6％的铸造或变形铝及铝合金生成的所有阳极氧化膜。

发布日期：2005-07-04  实施日期：2006-12-01

GB/T 8752-2006

铝及铝合金阳极氧化 薄阳极氧化膜连续性检验方法 硫酸铜法

Anodizing of aluminium and its alloys-Check of continuity of thin anodic oxide coating-Copper sulphate test

适用范围：本标准规定了用硫酸铜溶液检验铝及铝合金薄阳极氧化膜连续性的方法。　　本标准适用于铝及铝合金薄阳极氧化膜（厚度小于5μm）连续性的快速检验。当对阳极氧化膜表面的可见瑕疵存有疑问时，可用本方法来判断该瑕疵是否为局部裸...

发布日期：2006-09-26  实施日期：2007-02-01

ISO/TR 8125-1984

铝和铝合金的阳极氧化 着色阳极氧化膜的颜色和色差的测定

Anodizing of aluminium and its alloys -- Determination of colour and colour difference of coloured anodic coatings

适用范围：This Technical Report consists of three sections describing the visual method, the instrumental method, and the relation between instrumental and visual methods. The instrumental method also applies to...

发布日期：1984-02-01  实施日期：1984-02-01

ISO 6581-2010

铝和铝合金的阳极氧化 着色阳极氧化膜耐紫外光的测定

Anodizing of aluminium and its alloys -- Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings

适用范围：ISO 6581:2010 specifies a comparative method for the determination of the fastness of coloured anodic oxidation coatings to ultraviolet (UV) light and heat. The method is not suitable for testing colou...

发布日期：2010-07-01  实施日期：2010-07-01

JIS H8683-1-1999

铝及铝合金的阳极氧化镀层封孔度试验方法－第1部分:染料吸附试验

Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Dye spot test method

JIS H8602-2010

铝及铝合金的阳极氧化涂装复合涂层

Combined coatings of anodic oxide and organic coatings on aluminium and aluminium alloys

适用范围：This Japanese Industrial Standard specifies the combined coatings of anodic oxide and organic coatings (hereafter referred to as "combined castings")executed on the base metal of wrought product of alu...

实施日期：2010-01-20

BS EN ISO 3210-2010

Anodisieren von Aluminium und Aluminiumlegierungen. Prüfung der Qualit?t von verdichteten,anodisch erzeugten Oxidschichten durch Bestimmung des Masseverlustes nach Eintauchen in Chromphosphors?ure-L?sung Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution Anodisation de l'aluminium et de ses alliages. ?valuation de la qualit des couches anodiques colmatées par

实施日期：2010-07-31