BS 1344-4-1968

搪瓷层的试验方法.第4部分:耐磨性

Methods of testing vitreous enamel finishes. Resistance to abrasion

适用范围：This Part of BS 1344 gives a method of test for determining the abrasion resistance of vitreous enamel finishes.

实施日期：1968-01-01

NF A91-493-2011

Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method.

DIN EN ISO 6581-2010

铝及铝合金阳极氧化 着色阳极氧化膜耐紫外光和热相对牢度的测定

Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2010); German version EN ISO 6581:2010

实施日期：2010-12-01

BS EN ISO 9093-2-2002

小型船只 通海旋塞和贯穿船体的配件 第2部分:非金属的

Kleine Wasserfahrzeuge. Seeventile und Aussenhautdurchf hrungen. Nicht metallische Teile Small craft Seacocks and through-hull fittings Part 2:Non-metallic Petits navires. Vannes de coque et passe-coqu...

适用范围：ISO 9093-2:2002 specifies requirements for the manufacture and installation of non-metallic through-hull fittings and/or assemblies comprising through-hull fittings, seacocks, hose fittings and/or drai...

实施日期：2002-12-16

BS EN ISO 3882-2003

金属和其他无机物涂层.厚度测量方法述评

Metallic and other inorganic coatings. Review of methods of measurement of thickness

适用范围：NOTE — It is important to note that the result of the corrosion test is only strictly valid for the corrosive medium used in the test. It constitutes a basis for estimating the resistance to intergranu...

DIN 65183-1988

航空和航天;有机涂层的抗雨腐蚀时间

Aerospace; rain testing of organic coatings for the determination of the resistance to erosion

适用范围：This standard is used for rain testing of organic coating for the determination of the resistance of erosion. Testing is performed by means of two rotating arms, rading 1,2 m, at a pressure of 20 m bar...

NF A91-485-2010

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution.

DIN ISO 6370-2-2013

Vitreous and porcelain enamels – Determination of the resistance to abrasion – Part 2: Loss in mass after sub-surface abrasion

发布日期：2013-08-01  实施日期：2013-08-01

BS EN ISO 13805-2009

Vitreous and porcelain enamels for aluminium. Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)

实施日期：2000-01-15

EN ISO 7759-2010

Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer

实施日期：2010-09-01

DIN EN ISO 2376-2010

铝及铝合金阳极氧化 击穿电位的测定

Anodizing of aluminium and its alloys - Determination of electric breakdown potential (ISO 2376:2010); German version EN ISO 2376:2010

实施日期：2010-12-01

DIN EN ISO 3210-2010

铝及铝合金阳极氧化 磷酸/铬酸浸蚀后按质量损失评定阳极氧化膜的封孔质量

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution (ISO 3210:2...

实施日期：2010-12-01

NF A92-021-1990

铝和铝合金上的搪瓷涂层--附着试验

Vitreous and porcelain enamels for aluminium and aluminium lloys. Adhesion tests.

实施日期：1990-08-31

DIN ISO 6370-1-1995

釉瓷和搪瓷.耐磨性的测定.第1部分:磨损试验器具

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus; identical with ISO 6370-1:1991

适用范围：This document specifies the requirements for the testing apparatus to be used for the determination of the resistance to abrasion of vitreous and porcelain enamel coatings.

EN ISO 8993-2010

Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method

实施日期：2010-08-01

GB/T 7991.6-2014

搪玻璃层试验方法 第6部分：高电压试验

Test method of vitreous and porcelain enamels—Part 6 High voltage test

适用范围：本部分规定了搪玻璃设备的搪玻璃层高电压试验方法。 本部分适用于试验电压不低于2 kV，且搪玻璃层的厚度不小于660 μm的搪玻璃设备的髙电压试验。

发布日期：2014-12-05  实施日期：2015-07-01

DIN EN 14430-2004

釉瓷和搪瓷 高电压试验

Vitreous and porcelain enamels - High voltage test

BS EN 60811-406-2012

Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Resistance to stress cracking of polyethylene and polypropylene compounds

发布日期：2012-07-31  实施日期：2012-07-31

ISO 6988-1985

金属和其他无机覆盖层 通常凝露条件下的二氧化硫腐蚀试验

Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture

适用范围：Specifies a method for assessing the resistance of materials or products to condensed moisture containing sulfur dioxids. The method has been found to be suitable for testing metallic and non-organic c...

发布日期：1985-01-01  实施日期：1985-01-01

EN ISO 14577-4-2007

Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 4:Test method for metallic and non-metallic coatings

实施日期：2007-05-01