BS ISO 26146-2012

金属和合金的腐蚀 样品腐蚀性高温环境暴露后金相组织检验方法

Corrosion of metals and alloys. Method for metallographic examination of samples after exposure to high-temperature corrosive environments

发布日期：2012-12-31  实施日期：2012-12-31

DIN EN 3033-2008

Aerospace series - Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601(A286), uncoated - classification: 1100 MPa/425℃

实施日期：2008-12-01

EN 4562-2003

Aerospace series. Pipe coupling,welded,in heat resisting steel. Reductors. Inch series

实施日期：2003-02-01

ASTM A564/A564M-2010

热轧及冷加工时效硬化不锈钢棒及型材规格

Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

适用范围：<p id="s00002">1.1 This specification covers bars and shapes of age-hardening stainless steels. Hot-finished or cold-finished rounds, squares, hexagons, bar shapes, angles, tees, and channels are incl...

实施日期：2010-10-01

HB 5220.16-2008

高温合金化学分析方法第16部分：硫酸亚铁铵容量法测定钒含量

Methods for chemical analysis of superalloys-Part 16:Determination of vanadium content by ammonium ferrous sulfate volumetric method

适用范围：本部分规定了用硫酸亚铁铵容量法测定高温合金中钒含量的原理、试剂、仪器、取制样、分析步骤、分析结果的计算、允许差和质量控制与要求。本部分适用于高温合金中钒含量的测定。本部分不适用于含钴大于20%及含铈大于0.01%的试样...

发布日期：2008-04-02  实施日期：2008-10-01

DIN EN 3297-1998

航空和航天.耐热、镍基合金NI-P100HT,自锁、薄壁、MJ螺纹、插销.交货技术条件

Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification; German version EN 3297:1998

适用范围：This document specifies the characteristics, qualification and acceptance requirements for self-locking thin wall inserts with MJ threads in NI-P100HT. It is applicable whenever referenced. wall self-l...

ISO 3426-1975

工业用硫磺 在80摄氏度时质量损失的测定

Sulphur for industrial use -- Determination of loss in mass at 80 degrees C

适用范围：Specifies the heating of a test portion in an oven at 80 0C and the determination of the resulting difference in mass by weighing.

发布日期：1975-07-01  实施日期：1975-07-01

NF L23-163-1989

Aerospace series. Washers, flat, heat resisting steel.

NF S74-517/A1-2007

Protective clothing for firefighters - Performance requirements for protective clothing for firefighting.

NF L10-717-2008

Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section a or D < or = 100 mm, Rm > or = 900 MPa.

BS 6999-1989

用于采用固体燃料最大输出功率为45kW的燃烧设备的搪瓷低碳钢烟道管、其他部件和附件的规范

Vitreous-Enamelled Low-Carbon-Steel Fluepipes,Other Components and Accessories for Solid-Fuel-Burning Appliances with a Maximum Rated Output of 45 kW

适用范围：Requirements and appropriate tests for internal, freely exposed flue pipes.

实施日期：1989-03-31

EN 2933-1996

Aerospace Series. Bolts,T-Head,Relieved Shank,Long Thread,in Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at Ambient Temperature) 650 Degrees C (ISO 2861 :1988)

实施日期：1996-01-01

JJG 276-2009

高温蠕变、持久强度试验机检定规程

Verification Regulation of High-Temperature Creep and Stress-Rupture Testing Machines

适用范围：本规程适用于高温蠕变、持久强度试验机(以下简称试验机)的首次检定，后续检定和使用中检验。

发布日期：2009-07-10  实施日期：2010-01-10

EN 4337-2001

Aerospace Series. Heat Resisting Alloy NI-WH8901 (NiCr16Ti3Mn2). Filler Metal for Welding. Wire and Rod

实施日期：2001-06-01

EN 3506-2001

Aerospace Series. Hot Rolled Sheets and Plates in Heat Resisting Alloys. Thickness 2,0 mm Less Than or Equal to A Less Than or Equal to 100 mm. Dimensions

实施日期：2001-09-01

BS EN 1186-13-2002

接触食品的材料和制品 塑料 第13部分:全迁移的低温试验方法

Werkstoffe und Gegenstaende in Kontakt mit Lebensmitteln. Kunststoffe. Pruefverfahren fuer die Gesamtmigration bei hohen Temperaturen Materials and articles in contact with foodstuffs Plastics Part 13:...

适用范围：This European Standard specifies test methods for the determination of the overall migration into fatty foodsimulants from plastics materials and articles, by total immersion of test specimens in a fat...

实施日期：2002-10-14

CNS 3634-1989

环境试验方法(电气、电子)-高温(耐热性)试验方法

Basic Environmental Testing Procedures,Part 2 : Tests, Test B : Dry Heat

发布日期：1973-11-08  实施日期：1989-07-14

BS 3958-2-1982

隔热材料规范.预制硅酸钙绝热材料

Thermal insulating materials. Calcium silicate preformed insulation

适用范围：Deals with properties and dimensions of two types of preformed insulation for use up to 650<deg>C and 950<deg>C.

EN 2874-1996

Aerospace Series. Bolts,Large Bihexagonal Head,Close Tolerance Normal Shank,Medium Length Thread,in Heat Resisting Nickel Base Alloy,Passivated. Classification:1550 MPa (at Ambient Temperature) /315 Degrees C

实施日期：1996-07-01

HY 21.2-1992

海洋仪器基本环境试验方法 高温低温贮存试验导则

The basic method of environmental test for oceanographic instruments. Guideline for high and low temperature storage test

发布日期：1989-03-15  实施日期：1989-04-30