EN ISO 28706-2-2011

Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Part 2:Determination of resistance to chemical corrosion by boiling acids,boiling neutral liquids and/or their vapours [Superseded:CEN EN 14483-2]

实施日期：2011-05-01

EN ISO 4589-3-1996

Plastics. Determination of Burning Behaviour by Oxygen Index. Part 3:Elevated-Temperature Test ISO 4589-3:1996

实施日期：1996-08-01

ISO 2605-3-1985

压力用途的钢 高温特性的推导和验证 第３部分:在限定数据时,推导高温屈服应力或弹性极限应力特性可供选择的一种方法

Steel products for pressure purposes -- Derivation and verification of elevated temperature properties -- Part 3: An alternative procedure for deriving the elevated temperature yield or proof stress pr...

适用范围：Defines an alternative to the method specified in ISO 2605-1 and ISO 2605-2. Does not define a verification procedure; where verification of elevated temperature properties is required this shall be by...

发布日期：1985-12-01  实施日期：1985-12-01

NF B41-210-1-2003

Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 1 : determination of flexural strength at elevated temperatures.

GB/T 2423.36-1986

电工电子产品基本环境试验规程 试验Z/BFc:散热和非散热样品的高温/振动(正弦)综合试验方法

Basic environmental testing procedures for electric and electronic products--Tests Z/BFc:Combined high temperature/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specim...

GB/T 2951.6-1997

电缆绝缘和护套材料通用试验方法 第３部分：聚氯乙烯混合料专用试验方法 第１节：高温压力试验--抗开裂试验

Common test methods for insulating and sheathing materials of electric cables Part 3:Methods specific to PVC compounds Section one:Pressure test at high temperature--Test for resistance to cracking

实施日期：1998-10-01

BS 7655-6.1-1997

Spezifikation fuer Isolierstoffe und Bemantelungsmaterial fuer Kabel. Thermoplastische Bemantelungsmittel die eine niedrige Emission von korrosiven Gasen haben und fuer Kabel geeignet sind,die eine niedrige Rauchemission haben,wenn sie mit Feuer in Beruehrung kommen. Allgemeine Anwendung von thermoplastischen Typen Insulating and Sheathing Materials for Cables Part 6:Thermoplastic Sheathing Compounds Having Low Emission of Corrosive Gases,and Suitable for Use in Cables Having Low Emission of Smo

实施日期：1997-10-15

BS EN ISO 182-4-2001

塑料. 基于氯乙烯均聚物和共聚物的化合物及产物在高温下析出氯化氢和其它酸性产物的趋势测定.第4部分:电位测量法

Kunststoffe. Bestimmung der Neigung von Formmassen und Erzeugnissen auf der Basis von Vinyl-chlorid-Homopolymeren und-Copolymeren,bei erhoehten Temperaturen Chlorwasserstoff und andere saure Produkte a...

实施日期：2001-02-15

BS ISO 11359-1-1999

塑料.热力学分析(TMA).一般原理

Plastics-Thermomechanical Analysis (TMA)-Part 1:General Principles Plastiques. Analyse thermomecanique (TMA). Principes generaux

适用范围：This part of ISO 11359 specifies the general conditions for the thermomechanical analysis of thermoplastics and thermosetting materials, filled or unfilled, in the form of sheet or moulded parts. Therm...

实施日期：1999-11-15

BS EN ISO 2626-1995

铜.氢脆裂试验

Kupfer. Wasserstoff-Versproedungsversuch Copper-Hydrogen Embrittlement Test (V) Cuivre. Essai de fragilisation par chauffage dans l'hydrogène

适用范围：For assessing the susceptibility of deoxidized and oxygen-free high conductivity copper to embrittlement by hydrogen.

实施日期：1995-01-01

ISO 17492-2003

阻热和隔热服 暴露于火和辐射热的热传导测定

Clothing for protection against heat and flame -- Determination of heat transmission on exposure to both flame and radiant heat

适用范围：ISO 17492:2003 specifies a test method for measuring the heat transfer of horizontally mounted flame-resistant textile materials when exposed to a combination of convective and radiant energy. This tes...

发布日期：2003-05-01  实施日期：2003-05-01

EN 1946-4-2000

Thermal Performance of Building Products and Components. Specific Criteria for the Assessment of Laboratories Measuring Heat Transfer Properties. Part 4:Measurements by Hot Box Methods

实施日期：2000-04-01

BS ISO/TR 13989-1-2001

Berechnung der Fresstragfaehigkeit von Stirnraedern,Kugelraedern und Hypoidraedern. Blitztemperaturmethod Calculation of Scuffing Load Capacity of Cylindrical,Bevel and Hypoid Gears-Part 1:Flash Temperature Method Calcul de la capacite de charge au grippage des engrenages cylindriques,coniques et hypoides. Methode de la temperature-eclair

实施日期：2001-05-15

NF R14-503-1989

道路车辆.特种车辆后窗除冰装置和雨刮.试验方法

Road vehicles. Rear-window washing and wiping systems for passenger cars. Test methods.

NF G18-004-1982

天然或合成聚异戊二烯橡胶线 干燥箱中的人工老化和干热试验

Natural or synthetic polyisoprene rubber threads. Accelerated ageing test and dry heat resistance test.

实施日期：1982-12-01

ISO 5659-2-2006

塑料 烟雾产生 第2部分:用单室试验测定光密度

Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test

适用范围：ISO 5659-2:2006 specifies a method of measuring smoke production from the exposed surface of specimens of essentially flat materials, composites or assemblies not exceeding 25 mm in thickness when plac...

发布日期：2006-12-01  实施日期：2006-12-01

NF T54-029-1981

塑料 未增塑聚氯乙烯模制接头 压力系列 规范

Plastics. Moulded unplasticized PVC fittings. Pressure series. Specifications.

CNS 12194-1987

评估车用机油高温氧化特性试验法-L38试验法

Method of Test for Oxidation Characteristics of Crankcase Lubricating Oils-L38 Test

发布日期：1987-12-23  实施日期：1987-12-23

IEC 61300-2-18-2005

纤维光学互连器件和无源器件 基本试验和测量程序 第2-18部分:试验 干热 高温耐久性

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance

适用范围：This part of IEC 61300 details a procedure to determine the suitability of a fibre optic device or closure to withstand the environmental condition of extended high temperature that may occur during op...

发布日期：2005-07-26  实施日期：2005-07-26

NF P24-502-1995

Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Appearance after exposure at 150 degrees celsius. Test method.