DIN 3990-3-1987

圆柱齿轮和伞齿轮承载能力的计算 载荷部分的参数Ｙε,附加重合度εβ

Calculation of load capacity of cylindrical gears; calculation of tooth strength

适用范围：A presentation of the calculation methods of bending stress in the teeth for cylindrical gears is given. Methods for the determination of the influence factors on the tooth strength are explained.

ZB N11020-1990

压力表齿轮传动机构技术条件

实施日期：1991-01-01

JIS B1754-1998

齿轮装置验收－第2部分:齿轮装置机械振动的测定方法及振动等级的测定

Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing

JIS B1701-2-1999

园柱齿轮－渐开线齿轮齿型　第2部分:模数

Cylindrical gears for general engineering and for heavy engineering -- Part 2: Modules

GB/T 13051-1991

汽车机械式变速器动力输出孔连接尺寸

Motor vehicles--Connections for PTO

实施日期：1992-03-01

BS ISO 14635-1-2000

齿轮.FZG试验规程.有关齿轮咬接油的载重量的FZG试验方法A/8、3/90

Zahnraeder. FZG-Testverfahren. FZG Test-Verfahren A/8,3/90 fuer relative Fresstragfaehigkeit von Oelen Gears-FZG Test Procedures-Part 1:FZG Test Method A/8,3/90 for Relative Scuffing Load-Carying Capac...

适用范围：This part of ISO 14635 specifies a test method based on an FZG<up2)> four-square test machine to determine the relative load-carrying capacity of lubricating oils defined by the gear-surface damage kno...

实施日期：2000-08-15

DIN 3990-4-1987

圆柱齿轮承载能力的计算;啮齿承载能力的计算

Calculation of load capacity of cylindrical gears; calculation of scuffing load capacity

适用范围：A presentation of the calculation methods of scuffing load capacity (warm scuffing) for cylindrical gears, oil lubricated, is given. Methods for the determination of the influence factors on the risk o...

ISO/TR 13593-1999

工业齿轮用封闭式齿轮装置

Enclosed gear drives for industrial applications

发布日期：1999-10-01  实施日期：1999-10-01

ISO 23509-2006

锥齿轮和准双曲面齿轮的几何形状

Bevel and hypoid gear geometry

适用范围：ISO 23509:2006 specifies the geometry of bevel gears. The term bevel gears is used to mean straight, spiral, zerol bevel and hypoid gear designs. If the text pertains to one or more, but not all, of th...

发布日期：2006-09-01  实施日期：2006-09-01

GB/T 11281-2009

微电机用齿轮减速器通用技术条件

General specification for reduction gearhead of electrical micro-machine

适用范围：本标准规定了微电机用齿轮减速器系列的分类、技术要求和试验方法、检验规则等。本标准适用于微电机用齿轮减速器(以下简称减速器)。

发布日期：2009-09-30  实施日期：2010-02-01

JIS B1706-2-1999

直齿锥齿轮－第2部分:模数及径节

Straight bevel gears for general engineering and heavy engineering Part 2: Modules and diametral pitches

BS ISO 18653-2003

齿轮 单独齿轮测量用器械的评估

Gears Evaluation of instruments for the measurement of individual gears Engrenages. Evaluation des instruments de mesure des engregages individuels

适用范围：This International Standard specifies methods for the evaluation of measuring instruments used for gear measurements of involute, helix, pitch and runout. It is applicable both to instruments that meas...

实施日期：2003-12-02

HB 20046-2011

圆弧端齿检验

Verification for curvic coupling

适用范围：本标准规定了圆弧端齿检验原理和检验要求。 本标准适用于航空发动机圆弧端齿的检验。

发布日期：2011-07-19  实施日期：2011-10-01

GB/T 8543-1987

验收试验中齿轮装置 机械振动的测定

实施日期：1988-10-01

CNS 7589-1981

遥远操作传导杆管(熔接于甲板上之操作装置-具可摆动之冠状齿轮传动机构者)

Remote Control Gear with Transmission Tubing for Manual Operation Deck Operating Devices with Slewable Crown Gear Unit, Welding - in Type

发布日期：1981-06-18  实施日期：1981-06-18

BS 6413-6-1991

润滑油、工业用油和有关产品(L类).C系列(齿轮)用分类

Schmierstoffe,Industrieoele und verwandte Produkte (Klasse L). Klassifikation. Familie C (Getriebe) Lubricants,Industrial Oils and Related Products (Class L) Part 6:Classification for Family C (Gears) ...

适用范围：Classifies oils of family C according to composition and properties in general terms To be read in conjunction with BS 6413-0

实施日期：1991-01-01

CB 906-1979

Ｐ３０齿轮传动法兰青铜截止阀

发布日期：1980-10-01  实施日期：1980-10-01

GB/T 16848-1997

直廓环面蜗杆、蜗轮精度

Accuracy of double enveloping worm gearing withstraight line generatrix

适用范围：本标准规定了直廓环面蜗杆、蜗轮及其蜗杆副的误差定义、代号、精度等级、齿坯要求、检验与公差、侧隙和图样标注。　　本标准适用于轴交角为90°，中心距为80～1250mm的动力直廓环面蜗杆传动。

发布日期：1997-06-06  实施日期：1998-01-01

JB/T 7929-1995

齿轮传动装置清洁度

Cleanliness of gear units ...

实施日期：1996-04-14

DIN 51509-2-1988

润滑剂;制冷机油;使用过的制冷机油

Lubricants; selection for lubricants for gears; semi-fluid lubricants