IEC 60695-11-2-2013

着火危险试验 第11-2部分:试验火焰 1KW标称预混合型火焰 设备、验证试验方法和指南

Fire hazard testing. Part 11-2:Test flames. 1 kW pre-mixed flame. Apparatus,confirmatory test arrangement and guidance

发布日期：2013-12-10  实施日期：2013-12-10

BS EN 16811-1-2016

Winter service equipment and products — De-icing agents - Part 1: Sodium chloride — Requirements and test methods

发布日期：2016-08-31  实施日期：2016-08-31

EN 13272-2001

Railway Applications. Electrical Lighting for Rolling Stock in Public Transport Systems

实施日期：2001-10-01

ISO 6892-1-2009

金属材料 拉伸试验 第1部分:室温下的试验方法

Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature

适用范围：ISO 6892-1:2009 specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at room temperature.

发布日期：2009-08-01  实施日期：2009-08-01

EN 60885-3-2003

Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded power cables IEC 60885-3:1988

BS EN 10263-3-2001

冷加工和冷挤压的钢棒、棍和线 第3部分:一般交货技术条件 表面硬化钢

Walzdraht,Staebe und Draht aus Kaltstauch-und Kaltfliesspressstaehlen. Technische Lieferbedingungen fuer Einsatzstaehle Steel Rod,Bars and Wire for Cold Heading and Cold Extrusion-Part 3:Technical Deli...

适用范围：1 This part of EN 10263 is applicable to round rod, round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion a...

实施日期：2001-08-15

BS EN 2997-014-2011

Luft-und Raumfahrt. Elektrische Rundsteckverbinder mit Schraubkupplung,feuerbest?ndig oder nicht feuerbest?ndig,Betriebstemperaturen-65 °C bis 175 °C konstant,200 °C konstant,260 °C Spitze. Fester Steckverbinder mit quadratischem Montageflansch und integriertem Endgeh?use. Produktnorm Aerospace series. Connectors,electrical,circular,coupled by threaded ring,fireresi st ant or non fi re-resi st ant,operating temperatures. 65 °C to 175 °C continuous,200 °C continuous,260 °C peak Part 014:Square fl

实施日期：2011-07-31

BS EN 1986-1-1997

电动道路车辆.能量特性测定.纯电动车

Elektrisch angetriebene Strassenfahrzeuge. Messverfahren fuer Energieausrutzung. Reine Elektrofahrzeuge Electrically Propelled Road Vehicles-Measurement of Energy Performances Part 1:Pure Electric Vehi...

适用范围：This standard specifies the procedure to apply in order to measure the range and the consumption of the electrically propelled road vehicles (pure electric vehicles). This standard applies to the categ...

实施日期：1997-11-15

EN ISO 8307-2007

Flexible cellular polymeric materials. Determination of resilience by ball rebound

实施日期：2007-12-01

EN 3475-705-2005

Aerospace Series. Cables,Electrical,Aircraft Use. Test Methods. Part 705:Contrast Measurement

实施日期：2005-10-01

ASTM D7180-2005(2009)

土工技术项目用膨胀聚苯乙烯土工泡沫的使用指南

Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects

适用范围：<p>This guide informs the user of design considerations in the use of EPS geofoam which assist in the determination of the appropriate EPS geofoam for geotechnical applications.</p> <p>This guide does ...

实施日期：2005-06-01

IEC/PAS 62326-20-2011

印制电路板 第20部分:高亮度发光二极管用电子线路板

Printed boards. Part 20:Electronic circuit board for high-brightness LEDs

适用范围：This PAS specifies the properties of the electronic circuit board for high-brightness LEDs(hereafter described as “ECB”).

发布日期：2011-01-26  实施日期：2011-01-26

GB/T 11342-1989

厂矿企业内机动车辆驾驶员安全技术考核标准

Standard for examination of the safety techniques for operators of motor vehicles in mines and factories

实施日期：1990-01-01

IEC 60809-1995

道路机动车辆用钨丝灯 尺寸,电及光的要求

Lamps for Road Vehicles - Dimensional, Electrical and Luminous Requirements Lampes Pour Vehicules Routiers - Prescriptions Dimensionnelles, Electriques Et Lumineuses Second Edition; Amendment 1-1996; A...

适用范围：Covers filament lamps to be used in headlamps, fog-lamps and signalling lamps for road vehicles. Specifies the technical requirements and methods of test (dimensional, electrical and luminous). Perform...

BS EN ISO 9455-6-1997

软钎焊剂.试验方法.第6部分:卤化物(不包括氟化物)的含量测定

Soft soldering fluxes. Test methods. Determination and detection of halide (excluding fluoride) content

适用范围：This part of ISO 9455 specifies three quantitative methods for the determination of the ionic halide (ex-cluding fluoride) content of soldering fluxes. Halides are calculated as chlorides. A useful qua...

ISO 25297-2-2011

光学和光子学 光学数据的电子交换 第2部分:对ISO 23584中定义的类别和性能的映射

Optics and photonics -- Electronic exchange of optical data -- Part 2: Mapping to the classes and properties defined in ISO 23584

适用范围：ISO 25297-2:2011 specifies the relationship between the terms used in ISO 25297-1 and the properties defined in ISO 23584-2 and provides the means to facilitate the use of both standards.

发布日期：2011-12-01  实施日期：2011-12-01

NF E74-382-2008

Spanners and wrenches - Spline drive ends for power socket wrenches.

NF P51-020-1-2010

Chimneys - Design, installation and commissioning of chimneys - Part 1 : chimneys for non-roomsealed heating appliances.

NF E86-503-2-2004

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.

DIN 10502-4-2000

食品卫生.液体食品运输器皿.第4部分:装料检验

Food hygiene - Containers for liquid, granulated and powdered foodstuffs - Part 4: Proof of application