ASTM E671-1998(2010)

退火的实验室玻璃器皿最大容许热残留应力的规格

Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus

适用范围：<p id="s00002">1.1 This specification covers a limit for thermal residual stress in reusable annealed glass laboratory apparatus as determined by prescribed photoelastic measurement procedures.</p>

实施日期：1998-04-10

ASTM G58-1985(2011)

Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments

NF M87-229-2-2011

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2 : cracking-resistant carbon and low-alloy steels, and the use of cast irons.

DIN EN 13523-5-2014

感应涂层金属.试验方法.第5部分:冲击试验

Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test); German version

发布日期：2014-08-01  实施日期：2014-08-01

EN ISO 15156-1-2015

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2015)

发布日期：2015-09-16  实施日期：2015-09-16

EN 16603-32-01-2014

Space engineering - Fracture control [Superseded: CEN EN 14165]

实施日期：2014-08-01

ASTM D6905-2003(2012)

有机涂层冲击柔韧性试验方法

Standard Test Method for Impact Flexibility of Organic Coatings

实施日期：2003-05-10

ISO 6272-1-2011

油漆和清漆 快速变形(冲击承受性)试验 第1部分:落锤试验、大范围凹穴

Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter

适用范围：ISO 6272-1:2011 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused ...

发布日期：2011-08-01  实施日期：2011-08-01

ASTM D7085-2004(2010)e1

用X线荧光光谱测定法测定流化催化裂解催化剂中化学元素的指南

Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)

适用范围：<p>The chemical composition of fresh FCC catalyst and equilibrium FCC catalyst is a predictor of catalyst performance. The analysis of catalyst fines also provides information on the performance of the...

BS EN ISO 28721-2-2015

Vitreous and porcelain enamels - Glass-lined apparatus for process plants Part 2- Designation and specification of resistance to chemical attack and thermal shock

发布日期：2016-01-31  实施日期：2016-01-31

NF P98-818-44-2010

Bituminous mixtures - Test methods for hot mix asphalt - Part 44 : crack propagation by semi-circular bending test.

BS EN 1844-2013

防水柔性板 耐臭氧性测定 屋顶防水用塑料和橡胶薄板

Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing

发布日期：2013-06-30  实施日期：2013-06-30

BS EN ISO 22282-2-2012

岩土工程勘察和测试 地液压测试 第2部分：用开放系统在钻孔中进行渗水性试验

Geotechnical investigation and testing. Geohydraulic testing. Water permeability tests in a borehole using open systems

发布日期：2012-10-31  实施日期：2012-10-31

EN ISO 15156-3-2015

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015)

发布日期：2015-09-16  实施日期：2015-09-16

ASTM D4642-2004(2010)

用湿化学法测定重整催化剂中铂的试验方法

Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry

适用范围：<p>This test method provides a means of determining the platinum content of fresh reforming catalysts where the platinum is supported on an all alumina substrate. </p> <p>This test method is not intend...

实施日期：2004-04-01

NF T30-017-1-2011

Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1 : falling-weight test, large-area indenter.

ASTM D3907-2003(2008)

通过微活动性试验测试流化床催化裂化催化剂的试验方法

Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

适用范围：<p>The microactivity test provides data to assess the relative performance of FCC catalyst. Because results are affected by catalyst pretreatment, feedstock characteristics, test equipment, and operati...

实施日期：2003-10-01

EN 764-4-2014

Pressure equipment. Part 4:Establishment of technical delivery conditions for metallic materials

实施日期：2014-12-01

ASTM G168-2000(2013)

Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens

实施日期：2000-05-10

ASTM C1263-1995(2005)e1

柔性水蒸气缓凝剂热完整性试验方法

Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders

适用范围：<p>In many applications, the vapor retarders used on a thermal insulation will be exposed to the temperatures listed in 7.2. Cracking or delamination of the retarder under these conditions would, in m...