BS ISO 15985-2014

塑料 在高固相厌氧消化条件下测定最终厌氧生物降解和分解作用 释放的沼气分析法

Plastics. Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions. Method by analysis of released biogas

发布日期：2014-05-31  实施日期：2014-05-31

EN ISO 10993-15-2009

Biological evaluation of medical devices. Part 15:Identification and quantification of degradation products from metals and alloys

实施日期：2009-06-01

DIN EN ISO 14855-2-2009

塑料材料在受控堆肥条件下最终需氧生物降解能力的测定 析出二氧化碳的分析方法 第2部分:在实验室级试验中二氧化碳析出的重量分析测量

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of ca...

适用范围：This part of ISO 14855 specifies a method for determining the ultimate aerobic biodegradability of plasticmaterials under controlled composting conditions by gravimetric measurement of the amount of ca...

实施日期：2009-10-01

ASTM D129-2011

石油产品中硫含量的标准试验方法(一般高压分解设备法)

Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

实施日期：2011-10-01

NF A88-200-5-2011

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5 : identification of thermal-degradation products generated when welding or cutting through products composed wholl

EN 15297-2011

Solid biofuels. Determination of minor elements. As,Cd,Co,Cr,Cu,Hg,Mn,Mo,Ni,Pb,Sb,V and Zn

实施日期：2011-02-01

ASTM E1877-2013

根据热重分解数据计算材料热寿命的规程

Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data

发布日期：2013-10-15  实施日期：2013-10-15

BS ISO 14853-2016

Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production

发布日期：2016-07-31  实施日期：2016-07-31

ANSI/AAMI/ISO 10993-9-2009

Biological evaluation of medical devices. Part 9:Framework for identification and quantification of potential degradation products

实施日期：2009-01-01

ASTM D2843-2010

塑料燃烧或分解产生的烟气密度的测定方法

Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

适用范围：<p>Tests made on a material under conditions herein prescribed are of considerable value in comparing the relative smoke obscuration characteristics of plastics.</p> <p>This test method serves to deter...

实施日期：2010-01-01

ASTM E1235-2008

宇宙飞船环境控制区内非挥发性残余物重量分析测定的试验方法

Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft

适用范围：<p>The NVR determined by this test method is that amount that can reasonably be expected to exist on hardware exposed in environmentally controlled areas.</p> <p>The evaporation of the solvent at or ne...

实施日期：2008-05-01

ASTM E1090-2008

树脂中过氧化二枯基和过氧化二枯基分解产物的试验方法

Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins

适用范围：<p>Knowledge of the peroxide content of uncured PE and EVA samples is required to regulate the degree of crosslinking in the cured product. As end use applications of the cured product can be affecte...

实施日期：2008-04-01

NF X31-045-2012

Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements.

ASTM D3241-2015e2

Standard Test Method For Thermal Oxidation Stability Of Aviation Turbine Fuels

实施日期：2015-07-01

EN ISO 5983-2-2009

Animal feeding stuffs. Determination of nitrogen content and calculation of crude protein content. Part 2:Block digestion and steam distillation method

实施日期：2009-06-01

ISO 16968-2015

Solid biofuels -- Determination of minor elements

发布日期：2015-05-21  实施日期：2015-05-21

ASTM D7455-2008

成分分析用石油及润滑剂产品的试样制备规程

Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

实施日期：2008-05-01

ASTM D3241-2014

航空涡轮机燃料热氧化稳定性试验方法

Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

发布日期：2014-05-01  实施日期：2014-05-01

DIN EN ISO 8968-4-2016

Milk and milk products - Determination of nitrogen content - Part 4: Determination of protein and non-protein nitrogen content and true protein content calculation (Reference method) (ISO 8968-4:2016); German version EN ISO 8968-4:2016

发布日期：2016-09-01  实施日期：2016-09-01

NF T51-785-2-1999

Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Part 2 : pH method.