ASTM F2620-2009e1

聚乙烯管和管件热熔接合规程

Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings

适用范围：<p>The procedures described in Sections 7-9 are primarily intended for (but not limited to) field joining of polyethylene (PE) pipe and fittings, using suitable equipment and appropriate environmental ...

DIN EN ISO 4534-2011

Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test (ISO 4534:2010); German version EN ISO 4534:2010

ASTM E2792-2011

惰性气体融合法测定铝及铝合金中氢含量的标准试验方法

Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion

适用范围：<p>This test method is intended for the routine testing of aluminum and aluminum alloys to qualitatively determine the concentration of hydrogen in aluminum and aluminum alloys. It is not intended to ...

实施日期：2011-11-01

ASTM F2206-2002(2010)

平接熔合聚乙烯塑料管、管件、薄板、厚板或板坯的成品配件规格

Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe,Fittings,Sheet Stock,Plate Stock,or Block Stock

适用范围：<p id="s00002">1.1 This specification establishes requirements for fabricated fittings intended for use with outside-diameter controlled polyethylene pipe and tubing. These fittings are manufactured by...

实施日期：2002-09-10

NF A89-050-2004

Specification and qualification of welding procedures for metallic materials - General rules.

ASTM A928/A928M-2011

填充金属电熔焊铁素体/奥氏体(二联)不锈钢管标准规范

Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

实施日期：2011-11-01

ASTM E390-2015

Standard Reference Radiographs for Steel Fusion Welds

ASTM E1447-2009

用惰性气熔热传导/红外线检测法测定钛与钛合金中氢的试验方法

Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method

适用范围：<p>This test method is intended to test for compliance with compositional specifications. It is assumed that all who use this test method will be trained analysts capable of performing common laborat...

实施日期：2009-03-01

DIN EN ISO 18274-2011

Welding consumables. Solid wire electrodes,solid strip electrodes,solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification (ISO 18274:2010); German version EN ISO 18274:2010

ASTM E3042-2016

Standard Practice for Process Step to Inactivate Rodent Retrovirus with Triton X-100 Treatment

发布日期：2016-09-01  实施日期：2016-09-01

ASTM F2625-2010

用示差扫描量热法测量超高分子量聚乙烯的熔化焓、结晶度百分数和熔点的试验方法

Standard Test Method for Measurement of Enthalpy of Fusion,Percent Crystallinity,and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

适用范围：<p id="s00016">The crystallinity of UHMWPE will influence its mechanical properties, such as creep and stiffness. The reported crystallinity will depend on the integration range used to determine the h...

实施日期：2010-12-01

BS 7910-2013+A1-2015

Guide to methods for assessing the acceptability of flaws in metallic structures - AMD: July 31, 2015; CORR: September 30, 2015

发布日期：2013-12-31  实施日期：2013-12-31

DIN EN ISO 15609-4-2009

金属材料焊接工艺规程及评定 焊接工艺规程 第4部分:激光焊

Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding

适用范围：This part of ISO 15609 specifies requirements for the content of the welding procedure specification (WPS) forlaser beam welding processes, including overlay welding. It is not applicable to other proc...

实施日期：2009-10-01

ASTM C374-1970(2009)

搪瓷玻璃料熔化流动性的试验方法(流动按钮法)

Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)

实施日期：1970-06-15

ASTM E798-2016

Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources

NF A92-202-2011

Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test.

BS EN ISO 15609-1-2004

金属材料的焊接程序规范和合格鉴定.焊接程序规范.电弧焊

Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Arc welding

适用范围：ISO 15609-1:2004 specifies requirements for the content of welding procedure specifications for arc welding processes.The variables listed in this International Standard are those influencing the quali...

ASTM E1409-2008

用惰性气体溶解技术测定钛与钛合金中氧气和氮气的试验方法

Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique

实施日期：2008-06-15

ASTM E390-2011

钢熔焊缝参考底片

Standard Reference Radiographs for Steel Fusion Welds

适用范围：<p>These reference radiographs may be used as a means for establishing the types and severity levels of discontinuities that are revealed by radiographic examination of steel fusion welds.</p> <p>Each ...

实施日期：2011-08-01

ISO 15614-12-2014

Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 12: Spot, seam and projection welding

发布日期：2014-07-01  实施日期：2014-07-01