NF A84-444-2013

Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices

BS EN ISO 14113-2013

气焊设备 压力小于450bar(45MPa)的工业气体用橡胶和塑料软管和软管组件

Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)

发布日期：2013-10-31  实施日期：2013-10-31

BS EN ISO 2503-2009

气焊设备.焊接,切割和类似工艺用300巴以上气瓶调压器

Gasschwei?ger?te. Druckregler und Druckregler mit Durchflussmessger?ten für Gasflaschen für Schwei?en,Schneiden und verwandte Prozesse bis 300 bar (30 MPa) Gas welding equipment. Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding,cutting and allied processes up to 300 bar (30 MPa) Matériel de soudage aux gaz. Détendeurs et détendeurs débitmètres intégrés pour bouteilles de gaz utilisés pour le soudage,le coupage et les techniques connexes jus

适用范围：Gas welding, Welding equipment, Pressure regulators, Flowmeters, Gas cylinders, Flow regulators, Gas valves, Gas-welding equipment, Thermal cutting equipment, Compressed gases, Carbon dioxide, Acetylen...

实施日期：2009-09-30

NF A84-433-2011

Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar).

NF A84-419-2013

Gas welding equipment - Rubber and plastics hose and hose assemblies for use with indutrial gases up to 450 bar (45 MPa)

NF A84-443-2014

Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements

实施日期：2014-07-04

BS EN ISO 17662-2016

Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities

发布日期：2016-03-31  实施日期：2016-03-31

EN ISO 2503-2009

Gas welding equipment. Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding,cutting and allied processes up to 300 bar (30 MPa)

实施日期：2009-07-01

DIN EN ISO 9692-3-2016

Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016); German version EN ISO 9692-3:2016

发布日期：2016-11-01  实施日期：2016-11-01

NF A84-532-2011

气焊设备.吸气式空气--煤气手工吹管.规范和试验

Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests.

DIN 8552-3-2006

焊缝准备 铜及铜合金坡口形状 第3部分:气体熔焊和气体保护焊

Joint preparation - Groove forms on copper and copper alloys - Part 3: Gas welding and gas-shielded arc welding

发布日期：2006-01-01  实施日期：2006-01-01

DIN EN ISO 2503-2009

气焊设备 焊接、切割及相关工艺过程中使用300bar(30 MPa)以下的气瓶减压器和带流量计的减压器

Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)

适用范围：This Standard specifies requirements for single or two-stage pressure regulators for connections to gas cylinders.

实施日期：2009-11-01

NF A84-531-2014

Gas welding equipment - Marking for equipment used for gas welding, cutting and allied processes

DIN EN ISO 9012-2011

气焊设备 气吸式手动焊炬 规范和试验

Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests (ISO 9012:2008); German version EN ISO 9012:2011

DIN EN ISO 7291-2015

Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291-2010 + Amd 1-2015); German version EN ISO 7291-2010 + A1-2015

发布日期：2015-12-01  实施日期：2015-12-01

NF A89-057-1/A1-2008

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1 : arc and gas welding of steels and arc welding of nickel and nickel alloys.

ISO 14114-2014

气焊设备.焊接,切割和连接过程的乙炔多功能系统.一般要求

Gas welding equipment -- Acetylene manifold systems for welding, cutting and allied processes -- General requirements

适用范围：ISO 14114:2014 applies to acetylene cylinder manifold systems extending from the cylinder valve or the bundle outlet connections to the outlet connection of the main shut-off valve. It specifies requir...

发布日期：2014-05-01  实施日期：2014-05-01

NF A89-056-2004

Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test.

EN ISO 9692-3-2016

Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016)

发布日期：2016-07-20  实施日期：2016-07-20

DIN EN ISO 9692-1-2013

Welding and allied processes – Types of joint preparation – Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)

发布日期：2013-12-01  实施日期：2013-12-01