DIN 13-51-2005

ISO常用米制螺纹 第51部分:过渡配合用外螺纹(以前为密配合螺纹) 公差、极限偏差、尺寸极限

ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes

适用范围：The standard specifies tolerance classes for external screw thread.

实施日期：2005-08-01

ISO 724 CORR 1-2009

ISO一般用途米制螺纹 基本尺寸 技术勘误表1

Iso general-purpose metric screw threads. Basic dimensions. Technical corrigendum 1

实施日期：2009-07-15

BS 949-4-1990

丝锥.第4部分:米制磨牙丝锥规范:制造公差

Gewindebohrer. Geschliffene Gewindebohrer fuer metrische Gewinde:Fertigungstoleranzen Screwing Taps-Part 4:Metric Ground Thread Taps:Manufacturing Tolerances Tarauds. Tarauds. filets rectifies pour fil...

适用范围：Manufacturing tolerances on the threaded portion of taps for producing ISO metric threads of tolerance classes 4H to 8H and 4G to 6G. Valid for short taps specified in ISO/R 529 as well as any other ki...

实施日期：1990-06-28

DIN 13-21-2005

ISO常用米制螺纹 第21部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径1-24.5mm

ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 1 mm to 24, 5 mm

适用范围：This standard applies to the ISO general purpose metric screw threads with a basic profile according to DIN ISO 68-1. It contains the limits of sizes for fine threads from 1 mm to 24,5 mm nominal sizes...

实施日期：2005-08-01

ISO 5408-2009

螺纹 词汇表

Screw threads -- Vocabulary

适用范围：ISO 5408:2009 specifies the fundamental terms and definitions for screw threads. These terms are applicable to symmetrical threads and unsymmetrical threads, or cylindrical threads and taper threads.

发布日期：2009-06-01  实施日期：2009-06-01

DIN 13-22-2005

ISO常用米制螺纹 第22部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径25-52mm

ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm

实施日期：2005-08-01

EN 1661-1997

Hexagon nuts with flange

实施日期：1997-12-01

DIN 2249-2-2008

Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 2: Rod gauge for holes over 40 mm up to 500 mm nominal diameter

实施日期：2008-07-01

DIN ISO 965-2-1999

ISO一般用途米制螺纹.公差.第2部分:一般用途的内螺纹和外螺纹的尺寸极限.中等质量

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998)

DIN 2246-3-2008

Geometrical product specifications (GPS) - "GO" plug gauges - Part 3: For holes over 40 mm up to 120 mm nominal diameter

实施日期：2008-07-01

DIN 13-24-2005

ISO通用米制螺纹 第24部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径112-180 mm

ISO metric screw threads; limits of sizes for fine screw threads within the range 112 to 180 mm nominal diameter, together with the commonly used tolerance classes

适用范围：This standard applies to the ISO general purpose metric screw threads with a basic profile according to DIN ISO 68-1. It contains the limits of sizes for fine threads from 112 mm to 180 mm nominal size...

实施日期：2005-08-01

DIN 2284-1-2000

螺纹止端量规.第1部分:公称直径1～40mm的ISO米制止端工作量规.检验量规

Verification of geometrical parameters - "NOT GO" screw gauging members - Part 1: "NOT GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads from 1 mm up to 40 ...

ISO 965-3-1998

ISO一般用途米制螺纹 公差 第3部分:结构螺纹的偏差

ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads

发布日期：1998-12-01  实施日期：1998-12-01

DIN 939-1995

旋入端≈1.25d的双头螺栓

Studs - Metal end <ca> 1,25 <(kursiv)d>

DIN 2281-3-2001

几何产品规范(GPS).“通”端螺纹量规.第3部分:公称直径40mm至250mmISO米制螺纹的工作量规和检验量规

GO workshop screw plug gauges and check plugs for ISO metric screw threads over 40 mm up to 250 mm nominal diameter for use in precision engineering

NF E25-406-1998

凸缘六角螺母

Hexagon nuts with flange.

DIN 352-2008

Sets of taps - Sets of 3 taps for metric coarse ISO-threads M1 to M68

实施日期：2008-11-01

DIN 2233-2008

Geometrical product specifications (GPS) - Gap gauges "NOT GO" with forged gauging member over 3 mm up to 100 mm nominal size

实施日期：2008-07-01

DIN 376-2008

Machine screwing taps for coarse pitch metric ISO-thread M3 to M68

实施日期：2008-11-01

ISO 898-1-2009

碳钢和合金钢制紧固件的机械性能 第1部分:带指定特性的螺栓、螺钉和螺柱 粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread

适用范围：ISO 898-1:2009 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners — th...

发布日期：2009-04-01  实施日期：2009-04-01