DIN 316-1998

翼形螺钉

Wing screws, rounded wings

适用范围：The document contains dimensional and technical requirements of wing screws with rounded wings and specifies their designation.

NF E03-055-2004

ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing.

BS EN ISO 15065-2005

头部外形符合ISO 7721标准的沉头螺钉的埋头孔

Countersinks for countersunk head screws with head configuration in accordance with ISO 7721

适用范围：ISO 15065:2005 specifies the dimensions and designation of countersinks for countersunk head screws with a head configuration in accordance with ISO 7721. It is applicable to the types of screws accord...

ISO 725-2009

ISO英制螺纹 基本尺寸

ISO inch screw threads -- Basic dimensions

适用范围：ISO 725:2009 specifies the basic dimensions, in inches, of ISO inch screw threads in accordance with ISO 263. The values refer to the basic profile in accordance with ISO 68-2.

发布日期：2009-04-01  实施日期：2009-04-01

DIN 2248-2-2008

Geometrical product specifications (GPS) - "GO" gauging members - Part 2: For holes over 40 mm up to 120 mm nominal diameter

实施日期：2008-07-01

DIN 336-2003

切割螺纹用螺纹小径钻头的直径

Diameters of drills for minor diameters of tapped threads

适用范围：This standard specifies sizes for drills to be used prior to tapping cylindrical screw threads with standard length of engagement where the drill diameter is approximately equal to the nominal thread d...

DIN 2245-2-2008

Geometrical product specifications (GPS) - Limit plug gauges - Part 2: For holes over 40 mm up to 65 mm nominal diameter

实施日期：2008-07-01

NF E25-125-2004

内六角圆柱头螺钉

Hexagon socket head cap screws.

BS 3643-1-2007

ISO 米制螺纹.第1部分:原理和基本数据

Spezifikation für metrisches ISO-Gewinde. Grundlagen und Grunddaten ISO metric screw threads Part 1:Principles and basic data Spécification pour les filetages métriques ISO. Principes et données fondam...

适用范围：This part of BS 3643 gives a compilation of principles and basic datafor single-start, parallel screw threads having the ISO basic profilefor triangular screw threads. Guidance on calculating limits of...

实施日期：2007-11-30

EN ISO 12474-2010

Hexagon socket head cap screws with metric fine pitch thread

实施日期：2010-10-01

DIN 2246-4-2008

Geometrical product specifications (GPS) - "GO" plug gauges - Part 4: For holes over 40 mm up to 250 mm nominal diameter for precision mechanics

实施日期：2008-07-01

DIN 2247-5-2008

Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 5: With cylindrical gauging member for holes over 40 mm up to 250 mm nominal diameter for precision mechanics

实施日期：2008-07-01

NF E29-600-2009

工业管道 钢制连接管和螺塞 插接式焊接连接管 螺纹连接管和螺塞

Pipework - Stainless steel fittings threaded in accordance with ISO 7-1.

ISO 16239-2013

Metric series wires for measuring screw threads

发布日期：2013-11-01  实施日期：2013-11-01

NF E25-012-2005

Countersinks for countersunk head screws with head configuration in accordance with ISO 7721.

DIN 2248-3-2008

Geometrical product specifications (GPS) - "GO" gauging members - Part 3: For holes over 120 mm up to 200 mm nominal diameter

实施日期：2008-07-01

DIN 976-2-2009

Stud bolts - Part 2: Metric interference thread MFS

实施日期：2009-02-01

DIN 6912-2009

Hexagon socket head cap screws with centre, with low head

实施日期：2009-06-01

ISO 12474-2010

带米制细牙螺纹的内六角圆柱头螺钉

Hexagon socket head cap screws with metric fine pitch thread

适用范围：ISO 12474:2010 specifies the characteristics of hexagon socket head cap screws with metric fine pitch thread with nominal thread diameters from 8 mm up to 36 mm and product grade A.

发布日期：2010-10-01  实施日期：2010-10-01

EN ISO 23429-2004

Gauging of hexagon sockets ISO 23429:2004

实施日期：2004-01-01