ASTM E238-2012

金属材料销型承载试验方法

Standard Test Method for Pin-Type Bearing Test of Metallic Materials

适用范围：<p>The data obtained from the bearing test are the bearing ultimate and yield strength. The data provide a measure of the load-carrying capacity of a material edge loaded with a close-fitting cylindric...

实施日期：2012-06-01

ASTM G121-1998(2010)e1

清洗剂评定用经污染试件的制备规程

Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents

适用范围：<p>This practice will be suitable to direct the preparation of test coupons with a known amount of contaminant on the surface. A standard test coupon is described and a list of contaminants that have t...

ASTM D4935-2010

测量平面材料的电磁屏蔽效应的试验方法

Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials

适用范围：<p>This test method applies to the measurement of SE of planar materials under normal incidence, far-field, plane-wave conditions (E and H tangential to the surface of the material).</p> <p>The uncerta...

实施日期：2010-05-01

EN 2402-2014

Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D = 10 mm

实施日期：2014-04-01

BS EN 558-2008+A1-2011

Industriearmaturen. Baul?ngen von Armaturen aus Metall zum Einbau in Rohrleitungen mit Flanschen. Nach PN und Class bezeichnete Armaturen Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valves Robinetterie industrielle. Dimensions face-. face et face-àaxe de la robinetterie métallique utilisée dans les systèmes de canalisations. brides. Appareils de robinetterie désignés PN et Class CORR:June 30,2011;AMD:Janua

实施日期：2011-01-01

ASTM E323-2011

试验用板孔筛的标准规范

Standard Specification for Perforated-Plate Sieves for Testing Purposes

适用范围：<p id="s00002">1.1 This specification covers perforated plate with either round or square apertures, normally mounted in a frame for use as sieves in precision testing in the classification of material...

实施日期：2011-11-15

ASTM G65-2004(2010)

使用干砂/橡胶轮试验仪测量磨损的试验方法

Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus

适用范围：<p>The severity of abrasive wear in any system will depend upon the abrasive particle size, shape, and hardness, the magnitude of the stress imposed by the particle, and the frequency of contact of th...

实施日期：2004-11-01

EN ISO 15156-1-2015

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2015)

发布日期：2015-09-16  实施日期：2015-09-16

EN ISO 17640-2010

Non-destructive testing of welds. Ultrasonic testing. Techniques,testing levels,and assessment

实施日期：2010-12-01

BS EN 13480-4-2012+A1-2013

Metallic industrial piping Part 4: Fabrication and installation - AMD: October 31, 2013

发布日期：2012-12-31  实施日期：2012-12-31

DIN EN 13445-2-2015

Unfired pressure vessels - Part 2- Materials; German version EN 13445-2-2014

发布日期：2015-12-01  实施日期：2015-12-01

ASTM G32-2010

用振动仪器对气蚀的试验方法

Standard Test Method for Cavitation Erosion Using Vibratory Apparatus

适用范围：<p>This test method may be used to estimate the relative resistance of materials to cavitation erosion as may be encountered, for instance, in pumps, hydraulic turbines, hydraulic dynamometers, valves,...

实施日期：2010-12-01

NF E86-200-2-2009

Unfired pressure vessels - Part 2 : materials.

DIN 81249-1-2011

Corrosion of metals in sea water and sea atmosphere. Part 1: Terms and Definitions, basic information; Text in German and English

EN ISO 9227-2012

Corrosion tests in artificial atmospheres. Salt spray tests

实施日期：2012-05-01

EN 2252-2012

Aerospace series. Steel FE-PL1505 (15CrMoV6). 1 080 MPa = Rm = 1 250 MPa. Forgings. De = 100 mm

实施日期：2012-02-01

DIN EN ISO 16859-2-2016

Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015); German version EN ISO 16859-2:2015

发布日期：2016-02-01  实施日期：2016-02-01

ISO 13469-2014

Mechanical joining -- Form-fit blind rivets and (lock) bolt joints -- Specifications and qualification of testing procedures

发布日期：2014-07-01  实施日期：2014-07-01

ISO 18086-2015

Corrosion of metals and alloys -- Determination of AC corrosion -- Protection criteria

发布日期：2015-06-01  实施日期：2015-06-01

EN 764-4-2014

Pressure equipment. Part 4:Establishment of technical delivery conditions for metallic materials

实施日期：2014-12-01