BS EN 408-2010+A1-2012

木结构 结构木材和胶合木材 一些物理和机械性能的测定

Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties

发布日期：2011-05-31  实施日期：2011-05-31

BS EN ISO 16396-1-2015

Plastics. Polyamide (PA) moulding and extrusion materials. Designation system,marking of products and basis for specifications

发布日期：2015-02-28  实施日期：2015-02-28

ASTM C747-1993(2010)e1

用声波共振法测定炭和石墨材料弹性模量与基本频率的试验方法

Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

适用范围：<p>This test method is primarily concerned with the room temperature determination of the dynamic moduli of elasticity and rigidity of slender rods or bars composed of homogeneously distributed carbon...

ASTM D7012-2013

不同应力和温度状态下完整岩芯试样耐压强度及弹性模数的试验方法

Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

ASTM B508-2008

金属软管用铜合金带材的规格

Standard Specification for Copper Alloy Strip for Flexible Metal Hose

适用范围：<p>For purposes of determining compliance with the specified limits for requirements of the properties listed in the following table, an observed value or a calculated value shall be rounded as indicat...

实施日期：2008-04-01

ASTM C1198-2009

运用声波共振测定高级陶瓷动态容氏系数、抗剪弹性系数和泊松比率试验方法

Standard Test Method for Dynamic Young抯 Modulus,Shear Modulus,and Poisson抯 Ratio for Advanced Ceramics by Sonic Resonance

适用范围：<p>This test method may be used for material development, characterization, design data generation, and quality control purposes. It is specifically appropriate for determining the modulus of advanced...

实施日期：2009-11-04

ASTM E2769-2013

用三点弯曲和负荷控制速度的热力学分析法测量弹性模数的试验方法

Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

实施日期：2013-05-15

ASTM D638-2014

塑料抗张性能试验方法

Standard Test Method for Tensile Properties of Plastics

适用范围：This test method is designed to produce tensile property data for the control and specification of plastic materials. These data are also useful for qualitative characterization and for research and de...

发布日期：2014-12-15  实施日期：2015-03-01

NF S10-002-1991

光学玻璃--物理特性(非光学特性)

Optical glasses. Physical properties (other than optical properties).

BS EN ISO 6721-1-2011

Kunststoffe. Bestimmung dynamisch-mechanischer Eigenschaften. Allgemeine Grundlagen Plastics. Determination of dynamic mechanical properties Part 1:General principles Plastiques. Détermination des propriétés mécaniques dynamiques. Principes généraux

实施日期：2011-06-30

NF C31-888-19-2014

Superconductivity - Part 19 : mechanical properties measurement - Room temperature tensile test of reacted Nb0Sn composite superconductors

ASTM C1352/C1352M-2015

Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone

ASTM D5467/D5467M-1997(2004)

使用多层组合梁的单向聚合母体复合材料压缩特性的试验方法

Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam

适用范围：<p id="s00030">This test method is designed to produce membrane compressive property data for material specifications, research and development, quality assurance, and structural design and analysis. F...

实施日期：1997-10-10

ASTM D882-2010

塑料薄板材抗拉特性试验方法

Standard Test Method for Tensile Properties of Thin Plastic Sheeting

适用范围：<p>Tensile properties determined by this test method are of value for the identification and characterization of materials for control and specification purposes. Tensile properties can vary with speci...

实施日期：2010-04-01

NF B54-178/IN1-2011

Solid wood panels (SWP) - Requirements.

BS EN 1156-2013

人造板 对负荷的持续时间和蠕变因素的测定

Wood-based panels. Determination of duration of load and creep factors

发布日期：2013-04-30  实施日期：2013-04-30

EN 12369-2-2011

Wood-based panels. Characteristic values for structural design. Part 2:Plywood

实施日期：2011-06-01

ASTM D5449/D5449M-2011

环箍绕制的聚合物基体合成材料圆筒的横向抗压缩性能的标准试验方法

Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

适用范围：<p id="s00019">This test method is designed to produce transverse compressive property data for material specifications, research and development, quality assurance, and structural design and analysis....

实施日期：2011-11-15

ASTM D2555-2016

Standard Practice for Establishing Clear Wood Strength Values

发布日期：2016-08-01  实施日期：2016-08-01

DIN ISO 16486-3-2015

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes (ISO 16486-2:2012 + AMD 1:2014)

发布日期：2015-07-01  实施日期：2015-07-01