ASTM F2206-2002(2010)

平接熔合聚乙烯塑料管、管件、薄板、厚板或板坯的成品配件规格

Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe,Fittings,Sheet Stock,Plate Stock,or Block Stock

适用范围：<p id="s00002">1.1 This specification establishes requirements for fabricated fittings intended for use with outside-diameter controlled polyethylene pipe and tubing. These fittings are manufactured by...

实施日期：2002-09-10

ASTM F1924-2012

外径受控的聚乙烯燃气输送管和管道系统用塑料机械管件规格

Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

适用范围：This specification describes requirements and test methods for the qualification of plastic bodied mechanical fittings for use with outside diameter controlled polyethylene (PE) gas distribution pipe, ...

实施日期：2012-04-01

ASTM D3982-2008

接触式模制玻璃纤维增强热固树脂（玻璃纤维）管规格

Standard Specification for Contact Molded 揊iberglass?(Glass Fiber Reinforced Thermosetting Resin) Ducts

实施日期：2008-11-01

ASTM D5685-2011

"玻璃纤维"(玻璃-纤维-增强热固树脂)压力管配件的规范

Standard Specification for “Fiberglass?(Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

适用范围：<p id="s00002">1.1 This specification covers <span class=''unicode''>x201C;</span>fiberglass<span class=''unicode''>x201D;</span> (glass-fiber-reinforced thermosetting-resin) fittings for use with fila...

实施日期：2011-02-01

ASTM F2768-2009

塑料管道构件中带弹性密封装置的经改进短型ACME螺纹接头的规格

Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components

适用范围：<p id="s00002">1.1 This specification covers a Modified Stub ACME Thread Joint with an Elastomeric Seal used to seal the joint components in plastic piping components, or (if applicable) to components ...

实施日期：2009-12-01

ASTM F477-2010

接合塑料管用弹性密封料（垫圈）的规格

Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

适用范围：<p id="s00002">1.1 This specification covers elastomeric seals (gaskets) used to seal the joints of plastic pipe used for gravity, low-pressure, and high-pressure applications. This refers to push-on ...

实施日期：2010-03-15

ASTM F2206-2011

端面热熔聚乙烯塑料管,配件,片料,金属板料,或块料制成的配件的规范

Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe,Fittings,Sheet Stock,Plate Stock,or Block Stock

实施日期：2011-04-01

ASTM F2165-2002(2008)

挠性预制保温管规格

Standard Specification for Flexible Pre-Insulated Piping

适用范围：<p id="s00002">1.1 This specification covers flexible, pre-insulated piping commonly used to convey hot and cold fluids.</p> <p id="s00003">1.2 This specification establishes materials and performance ...

实施日期：2002-01-10

ASTM F2764-2010e1

无压生活污水管设备用30至60 in[750至1500 mm]聚丙烯三层壁管及管件的规格

Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

适用范围：<p id="s00002">1.1 This specification covers requirements and test methods for triple wall polypropylene pipe and fittings. The nominal inside diameters covered are 30 to 60 in. [750 to 1600 mm].</p> <...

ASTM F2764-2010a

非承压生活污水管设备用30至60 in[750至1500 mm]聚丙烯三壁管及管件的规格

Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

适用范围：<p id="s00002">1.1 This specification covers requirements and test methods for triple wall polypropylene pipe and fittings. The nominal inside diameters covered are 30 to 60 in. [750 to 1600 mm].</p> <...

ASTM F1056-2004(2011)

套管熔融连接聚乙烯管或管路和配件用套管熔融工具的规格

Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings

适用范围：<p id="s00002">1.1 This specification covers socket fusion tools for use in making socket fusion joints between polyethylene pipe or tubing and fittings as specified by Specifications <a href="http://...

ASTM F2764-2011

Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

实施日期：2011-02-15

ASTM F1201-1988(2010)

大于华氏0度管道的流体调节器配件规格

Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0 Degrees F

适用范围：<p id="s00002">1.1 This specification provides the minimum requirements for pressure-retaining components of fluid conditioner fittings. It addresses the pressure-retaining component design, fabricatio...

实施日期：1988-12-30

ASTM F2159-2011

SDR9交联聚乙烯(PEX)和高温聚乙烯(PE-RT)管用塑料插入管件的规范

Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

适用范围：<p id="s00002">1.1 This specification establishes requirements for sulfone plastic insert fittings and copper crimp rings for four sizes <br> (<small>³/₈</small>, <span class=''u...

实施日期：2011-04-15

ASTM F1961-2009

交链聚乙烯管线用带有盘形弹簧的金属机械冷拉平压缩配件规格

Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing

适用范围：<p id="s00002">1.1 This specification covers metal mechanical cold flare compression fittings with integral disc spring suitable for use with cross-linked polyethelene PEX plastic tubing in <small><sup...

实施日期：2009-12-01

ASTM F2735-2009

SDR9交联聚乙烯(PEX)和高温聚乙烯(PE-RT)管用塑料插入管件的规格

Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing

适用范围：<p id="s00002">1.1 This specification establishes requirements for sulfone plastic insert fittings and copper crimp rings for three sizes<br> (<span class=''unicode''>x00BD;</span>, <span class=''uni...

实施日期：2009-12-01

ASTM F2135-2001(2012)

Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings

实施日期：2001-08-10

ASTM F2764-2011a

无压生活污水管设备用30至60 in[750至1500 mm]聚丙烯三壁管及管件的规格

Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

适用范围：<p id="s00002">1.1 This specification covers requirements and test methods for triple wall polypropylene pipe and fittings. The nominal inside diameters covered are 30 to 60 in. [750 to 1600 mm].</p> <...

实施日期：2011-05-01

ASTM F2159-2010

SDR9交链聚乙烯管线用带有铜卷曲环的塑料插入配件规格

Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

适用范围：<p id="s00002">1.1 This specification establishes requirements for sulfone plastic insert fittings and copper crimp rings for four sizes <br> (<small>³/₈</small>, <span class=''u...

实施日期：2010-02-01

ASTM F2788-2011

交联聚乙烯管(PEX)规范

Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe

适用范围：<p id="s00002">1.1 This specification covers metric-sized crosslinked polyethylene (PEX) pipe that is outside diameter controlled, made in nominal pipe dimension ratios, and pressure rated for water at...

实施日期：2011-05-01