ASTM C1307-2014

用钚(III)二极管阵列分光光度法测定钚的测试方法

Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry

发布日期：2014-06-01 

ASTM C1432-2015

Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis

ASTM C758-2004(2010)

核级钚金属的化学、质谱、光谱化学、核及放射化学分析试验方法

Standard Test Methods for Chemical,Mass Spectrometric,Spectrochemical,Nuclear,and Radiochemical Analysis of Nuclear-Grade Plutonium Metal

适用范围：<p>These test methods are designed to show whether a given material meets the purchaser''s specifications.</p> <p>An assay is performed to determine whether the material has the specified plutonium con...

实施日期：2004-01-01

ASTM C1169-1997(2012)

Standard Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance

实施日期：1997-06-10

ISO 15646-2014

Re-sintering test for UO2, (U,Gd)O2 and (U,Pu)O2 pellets

发布日期：2014-06-01  实施日期：2014-06-01

BS ISO 21483-2013

钚在未经辐照的混合氧化物燃料颗粒硝酸（铀，钚）O2的溶解度的测定

Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U,Pu) O2

发布日期：2013-10-31  实施日期：2013-10-31

ASTM C1817-2015

Standard Test Method For The Determination Of The Oxygen To Metal (O/M) Ratio In Sintered Mixed Oxide ((U,Pu)O2) Pellets By Gravimetry

实施日期：2015-06-01

EN ISO 15366-2-2016

Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 2: Samples containing plutonium and uranium in the nan

发布日期：2016-04-20  实施日期：2016-04-20

ASTM C1204-2014

用磷酸中铁(II)还原后铬(VI)滴定法测定有钚情况下铀的试验方法

Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration

适用范围：Factors governing selection of a method for the determination of uranium include available quantity of sample, sample purity, desired level of reliability, and equipment availability.

发布日期：2014-06-01  实施日期：2014-06-01

NF M60-421-2000

Nuclear energy - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and dilution analysis by solvent chromatography.

NF M60-405-1998

Determination of plutonium in pure plutonium nitrate solutions. Gravimetric method.

ISO 11311-2011

核临界安全 反应堆外均匀钚-铀氧化物燃料混合物的临界值

Nuclear criticality safety -- Critical values for homogeneous plutonium-uranium oxide fuel mixtures outside of reactors

适用范围：ISO 11311:2011 specifies common reference critical values (of which the effective neutron multiplication factor, keff, is equal to 1) for homogeneous water-moderated plutonium-uranium oxide mixtures ba...

发布日期：2011-07-01  实施日期：2011-07-01

EN ISO 15366-1-2016

Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography - Part 1: Samples containing plutonium in the microgram range

发布日期：2016-04-20  实施日期：2016-04-20

ASTM C1316-2008

通过采用252Cf的无源-有源中子计数法对碎片和废料中核材料实施无损检定的试验方法

Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler

适用范围：<p>This test method is used to determine the U and Pu content of scrap and waste in containers. Active measurement times have typically been 100 to 1000 s. Passive measurement times have typically been...

实施日期：2008-06-01

ASTM C1458-2009e1

通过量热检定法无损测定钚、氚和241Am的试验方法

Standard Test Method for Nondestructive Assay of Plutonium, Tritium and ²⁴¹Am by Calorimetric Assay

适用范围：<p>This test method is the most accurate NDA technique for the assay of many physical forms of Pu. Isotopic measurements by gamma-ray spectroscopy or destructive analysis techniques are part of the tes...

NF M60-405-2014

Nuclear fuel technology - Determination of plutonium in pure plutonium nitrate solutions - Gravimetric method

NF M60-443-2011

Nuclear criticality safety - Critical values for homogeneous plutonium-uranium oxide fuel mixtures outside of reactors.

ASTM C1307-2015

用钚(III)二极管阵列分光光度法测定钚的测试方法

Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry

适用范围：This test method is designed to determine whether a given material meets the purchaser's specification for plutonium content.

发布日期：2015-01-01  实施日期：2015-01-01

NF M60-416-2000

Nuclear Energy - Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel - Guidelines to help in the definition of a product specification.

ASTM C697-2016

Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets

发布日期：2016-06-01  实施日期：2016-06-01