Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
适用范围：<p id="s00002">1.1 This specification covers cold-expansion fittings using metal compression-sleeves for use with cross-linked polyethylene (PEX) plastic pipe in <small><sup>3</sup>/<sub>8</sub></small...
实施日期：2009-12-01
Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe,Fittings,Sheet Stock,Plate Stock,or Block Stock
适用范围：<p id="s00002">1.1 This specification establishes requirements for fabricated fittings intended for use with outside-diameter controlled polyethylene pipe and tubing. These fittings are manufactured by...
实施日期：2002-09-10
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
适用范围：This specification describes requirements and test methods for the qualification of plastic bodied mechanical fittings for use with outside diameter controlled polyethylene (PE) gas distribution pipe, ...
实施日期：2012-04-01
Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
适用范围：<p id="s00002">1.1 This specification covers requirements for polyethylene (PE) pipe and fittings for nonpressure roof drain systems.</p> <p id="s00003">1.2 This specification covers pipe and fittings ...
实施日期：2010-08-01
Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
适用范围：<p id="s00002">1.1 This specification covers requirements and test methods for annular corrugated profile wall polyethylene pipe and fittings with an interior liner. The inside diameters covered are...
实施日期：2011-08-01
Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
实施日期：2002-09-10
实施日期：2001-04-10
Standard Specification for Mechanical Couplings Used on Polyethylene Conduit,Duct and Innerduct
适用范围：<p id="s00002">1.1 This specification establishes requirements for material, performance, workmanship and test methods for the qualification of 2 in. and smaller mechanical couplings that connect to DR...
实施日期：2002-04-10
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
实施日期：2010-03-01
Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
适用范围：<p id="s00002">1.1 This specification covers a coextruded polyethylene composite pressure pipe with a welded aluminum tube reinforcement between the inner and outer layers. The inner and outer polye...
实施日期：2010-02-15
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
适用范围：<p id="s00002">1.1 This specification covers polyethylene (PE) pipe made in dimensions based on outside diameters of 90 mm (3.500 in.) and larger.</p> <p id="s00003">1.2 Three standard outside diameter...
实施日期：2012-04-01
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
适用范围：<p id="s00002">1.1 This specification covers the identification of polyethylene plastic pipe and fittings materials in accordance with a cell classification system. It is not the function of this speci...
Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/ Polyethylene and Crosslinked Polyethylene/Aluminum/ Crosslinked Polyethylene Composite Pressure Pipe
适用范围：<p id="s00002">1.1 This specification covers metal insert fittings with split ring and compression nut (compression joint) and metal insert fittings with copper crimp rings (crimp joint) for four sizes...
实施日期：2009-12-01
Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe,Fittings,Sheet Stock,Plate Stock,or Block Stock
实施日期：2011-04-01
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene(PEX-AL-PEX)Pressure Pipe
适用范围：<p id="s00002">1.1 This specification covers a coextruded crosslinked polyethylene composite pressure pipe with a welded aluminum tube reinforcement between the inner and outer layers. The inner and ou...
实施日期：2011-09-15
Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
适用范围：<p id="s00002">1.1 This specification covers socket fusion tools for use in making socket fusion joints between polyethylene pipe or tubing and fittings as specified by Specifications <a href="http://...
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
适用范围：<p id="s00002">1.1 This specification covers the identification of polyethylene plastic pipe and fittings materials in accordance with a cell classification system. It is not the function of this speci...
实施日期：2010-01-01
Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
适用范围：<p id="s00002">1.1 This specification covers flexible chlorinated polyethylene (CPE) sheeting which is used without mastic, bedding, or coating for construction of concealed water-containment membrane...
实施日期：2009-09-01
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
实施日期：2010-12-01
请选择需要导出的字段：
请选择需要导出的字段：
知识产权声明 | 服务承诺 | 联系我们 | 客户服务 | 关于我们
网络出版服务许可证：(署)网出证(京)字第072号 互联网药品信息服务资格证书号：(京)-经营性-2016-0015 信息网络传播视听节目许可证 许可证号：0108284
万方数据标准管理系统V2.0 证书号:软著登字第11198474号
京ICP证：010071 京公网安备11010802020237号 京ICP备08100800号-1
客服电话：4000115888 客服邮箱：service@wanfangdata.com.cn 违法和不良信息举报电话：4000115888 举报邮箱：problem@wanfangdata.com.cn 举报专区：https://www.12377.cn
万方数据知识服务平台--国家科技支撑计划资助项目（编号：2006BAH03B01）©北京万方数据股份有限公司 万方数据电子出版社
