ASTM F2788/F2788M-2013

公制交联聚乙烯管规格

Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe

实施日期：2013-11-01

ASTM F2159-2010

SDR9交链聚乙烯管线用带有铜卷曲环的塑料插入配件规格

Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

适用范围：<p id="s00002">1.1 This specification establishes requirements for sulfone plastic insert fittings and copper crimp rings for four sizes <br> (<small>³/₈</small>, <span class=''u...

实施日期：2010-02-01

DIN 55406-2015

Packaging - Special requirements for the delivery, purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and 28 mm rolled-on closures made from aluminium (Al)

发布日期：2015-09-01  实施日期：2015-09-01

BS ISO 13106-2014

塑料 液态食物包装用吹塑聚丙烯容器

Plastics. Blow-moulded polypropylene containers for packaging of liquid foodstuffs

发布日期：2014-05-31  实施日期：2014-05-31

ASTM D3035-2014a

外径受控聚乙烯塑料管(SPD-PR)规格

Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

发布日期：2014-08-01  实施日期：2014-08-01

NF C32-011-605-2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 605 : physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds.

NF T54-063-3-2011

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3 : fittings.

NF T54-952-2/A1-2011

Multilayer piping systems for hot and cold water installations inside buildings - Part 2 : pipes - Amendment 1.

ASTM F1412-2016

Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

发布日期：2016-02-01  实施日期：2016-02-01

ASTM F2880-2011a

公称管道尺寸为3/4 英寸至65 英寸的聚乙烯压力管用搭接型法兰适配器的规格

Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in.

适用范围：<p id="s00002">1.1 This specification covers the polyethylene material and dimensions applicable to flange adapters (FAs) used to connect polyethylene pipes to other flanged pipe and components such a...

实施日期：2011-07-22

BS 7870-4.20-2011

LV and MV Polymeric Insulated Cables for Use by Distribution and Generation Utilities Part 4:Specifcation for Distribution Cables with Extruded Insulation for Rated Voltages of 11 kV and 33 kV Section 4.20:Three-Core 11 kV Cables (Implementation of HD 620)

实施日期：2011-12-31

ASTM C1288-2014

Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets

实施日期：2014-12-01

ASTM F2720/F2720M-2009

玻璃纤维增强聚乙烯缠绕式大口径管规格

Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe

实施日期：2009-12-01

BS EN 50290-2-35-2016

Communication cables Part 2-35: Common design rules and construction — Polyamide sheathing compound

发布日期：2016-09-30  实施日期：2016-09-30

ASTM F1734-2003(2009)

鉴定挤压工具、管和挤压工序组合以避免聚乙烯煤气管长期损坏的规程

Standard Practice for Qualification of a Combination of Squeeze Tool,Pipe,and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe

适用范围：<p>Squeeze-off is widely used to temporarily control the flow of gas in PE pipe. Squeeze tools vary depending on the size of the pipe and the design of the tool. Squeeze-off procedures vary depending o...

实施日期：2003-08-10

EN 448-2015

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene

发布日期：2015-11-04  实施日期：2015-11-04

ASTM F648-2013

外科植入物用超高分子量聚乙烯粉末和制成形状的规格

Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants

ASTM F2620-2012

聚乙烯管和管件热熔接合规程

Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings

发布日期：2012-08-01  实施日期：2012-12-01

ASTM D4967-1999(2013)

光缆绝缘、外套和强度组件用材料的选择指南

Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables

发布日期：2013-11-01  实施日期：2013-11-01

BS ISO 21307-2011

Rohre und Formstücke aus Kunststoffen. Stumpfschwei?verfahren für Rohre und Formstücke aus Polyethylen (PE) die beim Bau von Gas-und Wasserversorgungssystemen verwendet werden Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems Tubes et raccords en matières plastiques Modes opératoires d'assemblage par soudage bout. bout de tubes et raccords en polyéthylène (PE) utilisés pour la const

实施日期：2011-06-30