EN ISO 17855-2-2016

Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)

发布日期：2016-03-16  实施日期：2016-03-16

ASTM D1693-2015

Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

ISO 23900-3-2015

Pigments and extenders -- Methods of dispersion and assessment of dispersibility in plastics -- Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling

发布日期：2015-05-01  实施日期：2015-05-01

DIN 30670-2012

Polyethylen coatings of steel pipes and fittings. Requirements and testings

ASTM F810-2012

排水和废物处置吸收场地用的光滑壁聚乙烯(PE)管的标准规范

Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields

实施日期：2012-11-01

ASTM D5017-1996(2009)e1

用-13核磁共振法测定衬里低密度聚乙烯混合物的试验方法

Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance

适用范围：<p>Performance properties are dependent on the number and type of short chain branches. This test method permits measurement of these branches for ethylene copolymers with propylene, butene-1, hexene-...

ASTM F2620-2013

Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings

ASTM D2239-2012

以受控内径为基准的聚乙烯(PE)塑料管(SIDR-PR)标准规范

Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

适用范围：<p id="s00002">1.1 This specification covers polyethylene (PE) pipe made in standard inside dimension ratios (SIDR) and pressure rated for water (see appendix). Included are requirements for PE compou...

实施日期：2012-01-15

ASTM F2634-2010

用拉伸冲击法实验室测试聚乙烯熔接接合处的试验方法

Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

适用范围：<p>This test method is designed to impart tensile impact energy to a butt fused plastic pipe specimen, record the energy to fail the specimen and plot the load over time curve of the tensile test. Ener...

实施日期：2010-12-01

ASTM F2769-2014

耐热聚乙烯(PE-RT)塑料冷热水管和供水系统规格

Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems

发布日期：2014-11-01  实施日期：2015-01-01

ASTM F2762-2011e1

Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

实施日期：2011-01-01

NF C26-148-12-1998

Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 12 : polyethylene film tapes with pressure-sensitive adhesive.

NF C93-758-1995

Base materials for printed circuits. Part 2 : specifications. Specification no 8 : flexible copper-clad polyester (petp) film.

BS EN ISO 11299-3-2013

地下铺设送气管道翻修用塑料管道系统 紧密配合的管道衬里

Plastics piping systems for renovation of underground gas supply networks. Lining with close-fit pipes

发布日期：2013-05-31  实施日期：2013-05-31

NF P16-364-3-2011

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3 : lining with close-fit pipes.

ASTM F585-2016

Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers

ASTM D4020-2011

超高分子量聚乙烯模压和挤压材料的标准规范

Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

适用范围：<p id="s00002">1.1 This specification provides for the identification of virgin, natural color, unmodified homopolymer ultra-high-molecular-weight polyethylene (UHMW-PE) plastics molding and extrusion ...

实施日期：2011-09-01

ASTM F2306/F2306M-2014

重力雨水管和地下排水设施用12至60 in. [300 to 1500 mm]环状波纹异形管壁聚乙烯管及管件规格

Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications

DIN EN 1555-1-2010

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General; German version EN 1555-1:2010

实施日期：2010-12-01

ISO 19065-1-2014

Plastics. Acrylonitrile-styrene-acrylate (ASA),acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1:Designation system and basis for specifications

发布日期：2014-11-17  实施日期：2014-11-17