ASTM F877-2011

交联聚乙烯塑料热、冷水分配系统规格

Standard Specification for Crosslinked Polyethylene (PEX) Hot. and Cold-Water Distribution Systems

适用范围：<p id="s00002">1.1 This specification covers requirements, test methods, and marking requirements for system components when tested with nominal SDR9 crosslinked polyethylene tubing as a system. Syste...

实施日期：2011-06-01

ASTM D3485-2015

预组合电线及电缆用平滑壁螺旋形聚乙烯导管规格

Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)

发布日期：2015-03-01  实施日期：2015-05-01

NF P16-356-1/IN1-2011

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system.

ASTM F3034-2015

缠绕增强熔融挤压分级高密度聚乙烯制坯料规格

Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)

发布日期：2015-03-01  实施日期：2015-03-01

ASTM D1351-2014

电线电缆用聚乙烯热塑性绝缘材料的规格

Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable

适用范围：This specification covers thermoplastic polymer insulation consisting substantially of polyethylene considered suitable for use on electrical wire or cable with specified maximum conductor sizes that w...

发布日期：2014-04-01  实施日期：2014-04-01

DIN EN 13341-2011

家用采暖油、煤油和柴油地面储存用固定式热塑塑料罐 吹塑聚乙烯、转动成型聚惭烯和通过对聚酰胺6阳离子聚合制成的罐 要求和试验方法

Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods; German version EN 13341:2005+A1:2011

适用范围：This document specifies requirements for materials, physical properties and performance of single blow mouled and rotationally moulded polyethylene tanks and of rotationally mouled tanks made of anioni...

ASTM D2609-2014

聚乙烯塑料管用塑料制插入式配件规格

Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

发布日期：2014-12-01  实施日期：2015-01-01

ASTM F714-2012A

基于外径的聚乙烯(PE)塑料管(SDR-PR)规格

Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter

发布日期：2012-11-01  实施日期：2012-12-01

ASTM F1924-2012

外径受控的聚乙烯燃气输送管和管道系统用塑料机械管件规格

Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

适用范围：This specification describes requirements and test methods for the qualification of plastic bodied mechanical fittings for use with outside diameter controlled polyethylene (PE) gas distribution pipe, ...

实施日期：2012-04-01

ASTM F1960-2012

与交联聚乙烯(PEX)管一起使用的带PEX增强环的冷膨胀管件的标准规格

Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing

实施日期：2012-08-01

BS EN 60811-512-2012

Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temp

发布日期：2012-07-31  实施日期：2012-07-31

ASTM C1186-2008

非石棉纤维水泥板规格

Standard Specification for Flat Fiber-Cement Sheets

适用范围：<p id="s00002">1.1 This specification covers either untextured or surface textured fiber-cement flat sheets intended for exterior applications such as claddings, facades, curtain walls, soffits, and s...

实施日期：2008-05-01

NF T54-202-2002

Silage thermoplastic films.

ASTM F2788-2011

交联聚乙烯管(PEX)规范

Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe

适用范围：<p id="s00002">1.1 This specification covers metric-sized crosslinked polyethylene (PEX) pipe that is outside diameter controlled, made in nominal pipe dimension ratios, and pressure rated for water at...

实施日期：2011-05-01

ASTM F2159-2010

SDR9交链聚乙烯管线用带有铜卷曲环的塑料插入配件规格

Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

适用范围：<p id="s00002">1.1 This specification establishes requirements for sulfone plastic insert fittings and copper crimp rings for four sizes <br> (<small>³/₈</small>, <span class=''u...

实施日期：2010-02-01

ASTM F585-2013

柔性聚乙烯管插入到现有的下水道标准指南

tandard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers1

发布日期：2013-08-01  实施日期：2013-08-01

BS ISO 21307-2011

Rohre und Formstücke aus Kunststoffen. Stumpfschwei?verfahren für Rohre und Formstücke aus Polyethylen (PE) die beim Bau von Gas-und Wasserversorgungssystemen verwendet werden Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems Tubes et raccords en matières plastiques Modes opératoires d'assemblage par soudage bout. bout de tubes et raccords en polyéthylène (PE) utilisés pour la const

实施日期：2011-06-30

ASTM D4314-2012

电线及电缆用普通、重型及超重型交联氯磺化聚乙烯(CSM)套管的标准规范

Standard Specification for General-Purpose,Heavy-Duty,and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable

适用范围：<p id="s00002">1.1 This specification covers crosslinked chlorosulfonated polyethylene compounds suitable for use as outer coverings or jackets on electrical cables for general-purpose, heavy-duty, an...

实施日期：2012-01-01

ASTM F1282-2010

聚乙烯/铝/聚乙烯(PE-AL-PE)复合材料压力管规格

Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

适用范围：<p id="s00002">1.1 This specification covers a coextruded polyethylene composite pressure pipe with a welded aluminum tube reinforcement between the inner and outer layers. The inner and outer polye...

实施日期：2010-02-15

ASTM D7174-2005(2011)

铺筑混凝土路面和结构建筑用预制封闭气室式聚烯烃膨胀缝填料规格

Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

适用范围：<p id="s00002">1.1 This specification covers preformed expansion joint fillers made from closed-cell polyolefin materials having suitable compressibility and nonextruding characteristics.</p> <p id="s0...

实施日期：2005-06-01