ASTM F2562/F2562M-2015

Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage

ISO 5834-2-2011

外科植入物 超高分子量聚乙烯 第2部分:模塑型料

Implants for surgery -- Ultra-high-molecular-weight polyethylene -- Part 2: Moulded forms

适用范围：ISO 5834-2:2011 specifies the requirements and corresponding test methods for moulded forms, e.g. sheets and rods, made from ultra-high-molecular-weight polyethylene (UHMWPE) for use in the manufacture...

发布日期：2011-08-01  实施日期：2011-08-01

ASTM D3035-2015

外径受控聚乙烯塑料管(SPD-PR)规格

Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

适用范围：This specification covers polyethylene (PE) pipes made in thermoplastic pipe dimension ratios based on outside diameter, and pressure rated for water. All pipes produced under this specification may be...

发布日期：2015-03-01  实施日期：2015-03-01

DIN VDE 0276-620-2010

Power cables. Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV;German version HD 620 S2:2010,parts 0,1 and 10-C

发布日期：2010-11-01  实施日期：2010-11-01

ASTM F2786-2010

用气体介质对受压的聚乙烯压力管道系统进行现场渗漏测试的规程（气压渗漏测试）

Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)

适用范围：<p>If required by the authority having jurisdiction, pressurized gaseous media leak testing may be conducted after installation to discover and correct leaks or faults in a newly constructed or modifie...

实施日期：2010-02-01

BS EN ISO 21809-1-2011

Erd?l und Erdgasindustrie. Umhüllungen für erd-und wasserverlegte Rohrleitungen in Transportsystemen. Polyolefinumhüllungen (3-Lagen-PE und 3-Lagen-PP) Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1:Polyolefin coatings (3-layer PE and 3-layer PP) Industries du pétrole et du gaz naturel. Revêtements externes des conduites enterrées ou immergées utilisées dans les systèmes de transport par conduites. Revêteme

实施日期：2011-07-31

ASTM D4313-2012

电线及电缆用普通,重型及超重型交联氯化聚乙烯（CM）套管规范

Standard Specification for General-Purpose,Heavy-Duty,and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable

适用范围：<p id="s00002">1.1 This specification covers crosslinked chlorinated polyethylene (CM) compounds suitable for use as outer coverings or jackets on electrical cables for general-purpose, heavy-duty, an...

实施日期：2012-01-01

DIN EN 60384-19-1-2006

电子设备用固定电容器 第19-1部分:空白详细规范:金属化聚乙烯对苯二甲酸酯膜介质表面安装直流固定电容器 评定水平EZ

Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment lev...

实施日期：2008-11-01

ASTM F2435-2015

Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe

NF E39-013/IN1-2014

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene

ASTM F1473-2013

测量聚乙烯管和树脂耐裂纹慢速扩展的切口拉伸试验的试验方法

Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

实施日期：2013-08-01

NF C32-011-406-2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 406 : miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds.

ASTM F2080-2009

交联聚乙烯(PEX)管用带有金属压制套管的冷胀管件的规格

Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe

适用范围：<p id="s00002">1.1 This specification covers cold-expansion fittings using metal compression-sleeves for use with cross-linked polyethylene (PEX) plastic pipe in <small>³/₈</small...

实施日期：2009-12-01

ASTM F3203-2016

Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing

发布日期：2016-08-01  实施日期：2016-08-01

NF T54-063-2-2011

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2 : pipes.

ASTM D6712-2001(2009)

超高分子量聚乙烯(UHMW-PE)实心塑料型材规格

Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

适用范围：<p id="s00002">1.1 This specification covers requirements and test methods for the material and properties of solid plastic shapes manufactured from UHMW-PE.</p> <p id="s00003">1.2 The properties inclu...

实施日期：2001-08-10

EN 12201-2-2011

Plastics piping systems for water supply,and for drainage and sewerage under pressure. Polyethylene (PE). Part 2:Pipes

实施日期：2011-09-01

ASTM F2718-2009(2015)

用于水管修复的封装水泥灰浆现场加工衬套系统用聚乙烯和水泥材料的规格

Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines

发布日期：2015-03-01  实施日期：2015-04-01

ASTM F648-2010a

外科植入物用超高分子量聚乙烯粉末和制成形状的规格

Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants

ASTM F877-2011a

交联聚乙烯(PEX)塑料冷热水配置系统用标准规范

Standard Specification for Crosslinked Polyethylene (PEX) Hot. and Cold-Water Distribution Systems

适用范围：<p id="s00002">1.1 This specification covers requirements, test methods, and marking requirements for system components when tested with nominal SDR9 crosslinked polyethylene tubing as a system. Syste...

实施日期：2011-08-01