ISO 15701-2015

皮革.色牢度试验.受聚氯乙烯影响的色牢度

Leather -- Tests for colour fastness -- Colour fastness to migration into polymeric material

适用范围：ISO 15701:2015 specifies a method for assessing the propensity of dyes and pigments to migrate from leather to a synthetic substrate by determining the transfer of colour from the leather to white plas...

发布日期：2015-04-01  实施日期：2015-04-01

DIN EN ISO 22088-6-2009

塑料 耐环境应力裂纹(ESC)的确定 第6部分:慢应变速率法

Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 6: Slow strain rate method

适用范围：This part of ISO 22088 describes a procedure for assessing the environmental stress cracking (ESC)susceptibility of polymeric materials in chemical environments by slowly increasing the strain applied ...

实施日期：2009-10-01

IEC 61730-1-2016

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

发布日期：2016-08-17  实施日期：2016-08-17

IEC 60695-10-3-2016

Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

发布日期：2016-09-07  实施日期：2016-09-07

BS EN 60811-511-2012

Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Measurement of the melt flow index of polyethylene compounds

发布日期：2012-07-31  实施日期：2012-07-31

BS EN 60811-409-2012

Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Loss of mass test for thermoplastic insulations and sheaths

发布日期：2012-07-31  实施日期：2012-07-31

UL 1694-2002

UL Standard for Safety Tests for Flammability of Small Polymeric Component Materials Third Edition; Reprint with Revisions Through and Including February 17, 2006

发布日期：2002-02-18  实施日期：2002-02-18

EN ISO 17304-2013

牙科 聚合收缩:测定充填材料的聚合物聚合收缩方法

Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials

实施日期：2013-12-01

NF T54-952-2/A1-2011

Multilayer piping systems for hot and cold water installations inside buildings - Part 2 : pipes - Amendment 1.

UL 5-2011

UL Standard for Safety Surface Metal Raceways and Fittings Fourteenth Edition

实施日期：2011-09-16

ISO/TS 21003-7 AMD 1-2010

Multilayer piping systems for hot and cold water installations inside buildings. Part 7:Guidance for the assessment of conformity

实施日期：2010-09-01

ASTM D5132-2011

机动车内聚合物材料的水平燃烧速率试验方法

Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

适用范围：<p>This test method provides a standard laboratory procedure for measuring and comparing the burning rates of polymeric materials under specified controlled conditions.</p> <p>The rate of burning is af...

实施日期：2011-02-01

EN ISO 22088-6-2009

Plastics. Determination of resistance to environmental stress cracking (ESC). Part 6:Slow strain rate method

实施日期：2009-06-01

IEC/TS 61244-1-2014

聚合物长期辐射老化的测定 第1部分:监测受限制扩散氧化的技术

Determination of long-term radiation ageing in polymers. Part 1:Techniques for monitoring diffusion-limited oxidation

适用范围：IEC/TS 61244-1:2014,which is a technical specification, reviews experimental techniques to quantitatively monitor the effects when oxygen is present during ageing of polymers in various environments in...

发布日期：2014-08-22  实施日期：2014-08-22

ASTM F2617-2015

Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry

ASTM F2617-2008e1

用能量色散X射线分光法鉴定并量化聚合材料中铬、溴、镉、汞和铅的试验方法

Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry

适用范围：<p>This test method is intended for the determination of chromium, bromine, cadmium, mercury, and lead, in homogeneous polymeric materials. The test method may be used to ascertain the conformance of t...

NF T56-125-2002

橡胶或塑料微孔制品 平放在火焰中作性能测定的实验方法

Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame.

ISO 18249-2015

Non-destructive testing -- Acoustic emission testing -- Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers

发布日期：2015-05-01  实施日期：2015-05-01

NF S52-740-1997

Wintersport equipment. Marking of parts made of polymer material.

NF T56-112-2001

柔性泡沫聚合材料.压缩成型测定

Flexible cellular polymeric materials - Determination of compression set.