Standard Practice for Determining the Specification Conformance of Geosynthetics
适用范围：<p>This practice provides a means by which the purchaser can determine the conformance of geosynthetic properties as applied to the acceptance or rejection of a material in regards to a material speci...
Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method
适用范围：<p><span class="italic"><span class="italic">Tests in Orthogonal Directions</span>8212;</span>The flatjack most accurately determines the stress parallel to the long axis of the adit, because this stre...
Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
适用范围：<p>The test method is used to estimate qualitatively the durability of weak rocks in the service environment.<span class="bold">(1-7). </span></p> <p>This test method is used to assign quantitative dur...
Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil,Rock,and Their Contained Fluids
适用范围：<p>Adequately documented geoscience data are beneficial to studies utilizing traditional and computer technology for conducting resource surveys and in analyzing environmental concerns.</p> <p>Geoscien...
Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
适用范围：<p>This test method is intended for use in determining the volume and the volume distribution of pores in soil and rock with respect to the apparent diameter of the entrances of the pores. In general,...
Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
适用范围：This test method is intended to give a relatively rapid indication of the potential expansive reactivity of certain carbonate rocks that may be used as concrete aggregates. The test method has been suc...
Standard Test Method for Rock Bolt Anchor Pull Test
Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
适用范围：<p>Results of this test method are used to predict displacements in rock mass caused by loads from a structure or from underground construction. It is one of several tests that should be performed.</p...
Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
适用范围：<p>These test methods are used to determine the in-place density of compacted materials in construction of earth embankments, road fills, and structure backfill. For construction control, these test m...
Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
适用范围：<p>The RQD was first introduced in the mid 1960s to provide a simple and inexpensive general indication of rock mass quality to predict tunnelling conditions and support requirements. The recording of...
Standard Terminology Relating to Soil,Rock,and Contained Fluids
适用范围：<p>Definitions in this standard are to be regarded as the correct ones for terms found in other ASTM standards of Committee D18. Certain terms may be found in more than one standard issued under the j...
Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
适用范围：<p>By definition the tensile strength is obtained by the direct uniaxial tensile test. But the tensile test is difficult and expensive for routine application. The splitting tensile test appears to off...
Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
适用范围：<p>The laboratory weathering procedure will generate data that can be used to: (<span class="italic">1</span>) determine whether a solid material will produce an acidic, alkaline, or neutral effluent...
Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method
适用范围：<p><span class="italic"><span class="italic">Limitations</span>: </span> <p>The depth of measurement is limited only by the length of the test hole.</p> <p>Presently, the results of the hydraulic fract...
Standard Practice for Design and Installation of Ground Water Monitoring Wells
适用范围：<p>This practice for the design and installation of groundwater monitoring wells will promote <span class="italic">(1)</span> efficient and effective site hydrogeological characterization; <span class=...
Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
适用范围：For many materials, the water content is one of the most significant index properties used in establishing a correlation between soil behavior and its index properties.
Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
适用范围：<p>This practice provides the basic minimum criteria for use in evaluating the qualifications of a testing or inspection agency, or both, for soil and rock. The criteria may be supplemented by more sp...
Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
适用范围：<p>Rock is much weaker in tension than in compression. Thus, in determining the failure condition for a rock structure, many investigators employ tensile strength of the component rock as the failure s...
Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
适用范围：p>The dimensional, shape, and surface tolerances of rock core specimens are important for determining rock properties of intact specimens. This is especially true for strong rocks, greater than 7250 ps...
Standard Practice for Preparation of Rock Slabs for Durability Testing
适用范围：<p>This practice is used to prepare rock specimens for durability testing and to evaluate any internal defects, such as cracks, that may not be apparent on the surfaces of broken blocks of rock. Such e...
知识产权声明 | 服务承诺 | 联系我们 | 客户服务 | 关于我们
互联网出版许可证：新出网证(京)字042号 互联网药品信息服务资格证书号：(京)-经营性-2011-0017 信息网络传播视听节目许可证 许可证号：0108284
京ICP证：010071 京公网安备11010802020237号 京ICP备08100800号-1
客服电话：4000115888 客服邮箱：email@example.com 违法和不良信息举报电话：4000115888 举报邮箱：firstname.lastname@example.org 举报专区：https://www.12377.cn