NF T46-002-2012

硫化橡胶或热塑橡胶。拉力试验

Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties.

EN ISO 22088-5-2009

Plastics. Determination of resistance to environmental stress cracking (ESC). Part 5:Constant tensile deformation method

实施日期：2009-06-01

ISO 19892-2011

塑料管道系统 冷热水用热塑管配件 接头对压力循环阻力的试验方法

Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of joints to pressure cycling

适用范围：ISO 19892:2011 specifies a method for testing the resistance of joints to pressure cycling. It is applicable to piping systems based on thermoplastics pipes intended to be used in hot and cold water ap...

发布日期：2011-11-01  实施日期：2011-11-01

DIN EN ISO 9311-2-2011

热塑性管道系统用粘合剂 第2部分：剪切强度的测定

Adhesives for thermoplastic piping systems. Part 2: Determination of shear strength (ISO 9311-2:2011); German version EN ISO 9311-2:2011

ISO 9311-2-2011

热塑管系统用粘接剂 第2部分:剪切强度的测定

Adhesives for thermoplastic piping systems -- Part 2: Determination of shear strength

适用范围：ISO 9311-2:2011 specifies a method for the determination of the shear strength of joints made with adhesives for thermoplastic piping systems.

发布日期：2011-08-01  实施日期：2011-08-01

DIN EN ISO 22088-5-2009

塑料 耐环境应力裂纹(ESC)的确定 第5部分:恒定拉伸变形法

Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method

适用范围：This part of ISO 22088 specifies a method for the determination of the environmental stress cracking (ESC)behaviour of thermoplastics when they are subjected to a constant tensile deformation in the pr...

实施日期：2009-10-01

ASTM F2618-2009

化学废水排放系统用氯化聚氯乙烯管和管件的规格

Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems

实施日期：2009-04-01

ISO 27126-2014

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals -- Specification

发布日期：2014-09-01  实施日期：2014-09-01

DIN EN 12704-2016

Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives; German version EN 12704:2016

发布日期：2016-10-01  实施日期：2016-10-01

EN ISO 9967-2016

Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)

发布日期：2016-01-27  实施日期：2016-01-27

DIN EN 16296-2013

Imperfections in thermoplastics welded joints – Quality levels

发布日期：2013-01-01  实施日期：2013-01-01

BS ISO 17484-1-2014

塑料管道系统 最大操作压力不超过5巴(500千帕)的室内燃气设施用多层管道系统

Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa). Specifications for systems

发布日期：2014-05-31  实施日期：2014-05-31

NF A89-810-4-2002

Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test.

BS EN ISO 3994-2011

Kunststoffschl?uche. Mit einer thermoplastischen Wendel verst?rkte thermoplastische Schl?uche zum Ansaugen und F?rdern w?ssriger Stoffe. Anforderung Plastics hoses. Helicalthermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification Tuyaux en plastiques. Tuyaux thermoplastiques. renforcement thermoplastique en spirale pour aspiration et refoulement de matières aqueuses. Spécifications

实施日期：2011-06-30

EN ISO 1133-1-2011

Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method [Superseded: CEN EN ISO 1133]

发布日期：2011-12-01  实施日期：2011-12-01

NF T51-507-5-2014

Plastics - Differential scanning calorimetry (DSC) - Part 5 : determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

EN ISO 11357-2-2014

Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height

实施日期：2014-03-01

NF T51-511-2000

塑料制品(聚脂树脂)、涂料和清漆(粘合剂).部分酸值和总酸值的测定

Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value.

ISO 6224-2011

一般用途输水用织物增强热塑塑料软管 规范

Thermoplastics hoses, textile-reinforced, for general-purpose water applications -- Specification

发布日期：2011-10-01  实施日期：2011-10-01

NF L10-201-1998

航空航天系列.金属底层最小厚度5微米的带粘接材料和填料的干润滑碳氟化合物覆层.覆层零件质量

Aerospace series. Lubricating dry fluorocarbonated coating with binding material and fillers, of a minimum thickness of 5 micrometers on metallic substrate. Quality of coated parts.

实施日期：1998-12-01