DIN EN ISO 17161-2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests (ISO 17161:2014); German version EN ISO 17161:2016

发布日期：2016-10-01  实施日期：2016-10-01

EN 14427-2014

Transportable refillable fully wrapped composite cylinders for Liquefied Petroleum Gases (LPG) - Design and Construction

实施日期：2014-06-01

ASTM D6415/D6415M-2006a(2013)

Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

实施日期：2006-03-01

BS ISO 4384-1-2012

滑动轴承 轴承金属的硬度测试 多层轴承

Plain bearings. Hardness testing of bearing metals. Multilayer bearings

发布日期：2012-10-31  实施日期：2012-10-31

NF B43-204-2003

高技术陶瓷.室温下复合陶瓷的机械性能.第4部分:通过对切口试样的压缩载荷测定剪切强度

Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4 : determination of interlaminar shear strength by compression loading of notched test specimens.

ASTM D7078/D7078M-2005

用V形切口钢轨剪切法测定复合材料剪切性能的试验方法

Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

适用范围：<p id="s00024">This shear test is designed to produce shear property data for material specifications, research and development, quality assurance, and structural design and analysis. Either in-plan...

实施日期：2005-05-15

ISO 17161-2014

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Ceramic composites -- Determination of the degree of misalignment in uniaxial mechanical tests

发布日期：2014-02-20  实施日期：2014-02-20

ISO 10677-2011

精细陶瓷(高级陶瓷、高技术陶瓷) 半导体光催化材料测试用紫外光源

Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials

适用范围：ISO 10677:2011 describes an ultraviolet (UV) light source and specifies a method of measuring the radiation intensity which is used in testing the performance of semiconducting photocatalytic materials...

发布日期：2011-06-29  实施日期：2011-06-29

ISO 7207-2-2011

外科植入物 部分和全膝关节假体用组件 第2部分:金属、陶瓷和塑料连接面

Implants for surgery -- Components for partial and total knee joint prostheses -- Part 2: Articulating surfaces made of metal, ceramic and plastics materials

适用范围：ISO 7207-2:2011 specifies surface finish requirements for the articulating surfaces of total and partial knee joint prostheses classified in ISO 7207-1. ISO 7207-2:2011 is intended to provide guidance ...

发布日期：2011-07-01  实施日期：2011-07-01

EN 15534-1-2014

热塑性塑料的纤维素材料(通常称为木塑复合材料(WPC)或天然纤维复合材料(NFC)) 第1部分:测定化合物和产品特性的试验方法

Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Part 1: Test methods for characterisation of compound...

实施日期：2014-01-01

NF G00-035-2014

Textiles - Man-made fibres - Generic names

ISO 17138-2014

精细陶瓷(高级陶瓷、高科技陶瓷) 室温下复合陶瓷的力学性能 挠曲强度的确定

Fine ceramics (advanced ceramics,advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of flexural strength

适用范围：ISO 17138:2014 describes a method for the determination of the flexural strength of ceramic matrix composite materials with continuous fibre reinforcement,under three-point or four-point bend at room t...

发布日期：2014-11-18  实施日期：2014-11-18

NF C31-888-19-2014

Superconductivity - Part 19 : mechanical properties measurement - Room temperature tensile test of reacted Nb0Sn composite superconductors

EN 15387-2011

Packaging. Flexible laminate tubes. Test methods to assess the strength of the side seam

实施日期：2011-08-01

BS EN 16245-1-2013

纤维增强塑料复合材料 原料特性说明 通用要求

Fibre-reinforced plastic composites. Declaration of raw material characteristics. General requirements

发布日期：2013-06-30  实施日期：2013-06-30

ASTM D5467/D5467M-1997(2004)

使用多层组合梁的单向聚合母体复合材料压缩特性的试验方法

Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam

适用范围：<p id="s00030">This test method is designed to produce membrane compressive property data for material specifications, research and development, quality assurance, and structural design and analysis. F...

实施日期：1997-10-10

NF H34-066-2011

Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam.

BS EN 438-4-2016

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater

发布日期：2016-02-29  实施日期：2016-02-29

NF F11-291-1991

铁路运输车辆--复合材料制成的制动瓦衬垫

Railway rolling stock. Brake shoe inserts made of composite materials.

ASTM D6115-1997(2011)

Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites

实施日期：1997-04-10