ASTM D3664-2004(2009)

电气设备中电容器用双轴取向聚合树薄膜的规格

Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment

适用范围：<p id="s00002">1.1 This specification covers thin biaxially oriented polymeric resin film for use in capacitors for electrical equipment. The material is biaxially oriented to improve the tensile prop...

实施日期：2004-03-01

ASTM D7109-2012

30至90个循环时用欧洲柴油机喷射器测定含液聚合物剪切稳定性的试验方法

Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles

实施日期：2012-11-01

ASTM D5275-2011

含有液体的聚合物用燃料喷射器剪力稳定性试验方法

Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

适用范围：<p>This test method evaluates the percent viscosity loss for polymer-containing fluids resulting from polymer degradation in the high shear nozzle device. Minimum interference from thermal or oxidative...

实施日期：2011-05-01

ASTM C580-2002(2008)

耐化学侵蚀灰浆、薄浆及整体面层的弹性模量和抗弯强度的试验方法

Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars,Grouts,Monolithic Surfacings,and Polymer Concretes

适用范围：<p>This test method is generally applicable to rigid and semirigid materials. Although flexural strength cannot be determined for those materials that do not break, tangent modulus of elasticity can be...

实施日期：2002-10-10

EN 15817-2011

Polymer modified bituminous thick coatings for waterproofing. Water resistance

实施日期：2011-03-01

ASTM D876-2009

电绝缘用非刚性氯乙烯聚合物管的试验方法

Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

实施日期：2009-10-01

ASTM E1252-1998(2013)e1

获取定量分析用红外线光谱的通用技术规程

Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis

实施日期：1998-03-10

ASTM D6372-2015

Standard Practice For Design,Testing,And Construction Of Microsurfacing

实施日期：2015-06-15

ISO 6721-10-2015

Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

发布日期：2015-09-01  实施日期：2015-09-01

ASTM D4317-1998(2011)

聚醋酯乙烯基乳液型胶粘剂规格

Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives

适用范围：<p id="s00002">1.1 This specification covers polyvinyl acetate or polyvinyl acetate copolymer resin emulsion adhesives suitable for use on wood, wood-based substrates, or plastic laminates. It does no...

实施日期：1998-04-10

ASTM D2121-2016

Standard Test Methods for Polymer Content of Styrene Monomer

发布日期：2016-06-01  实施日期：2016-06-01

ASTM D5630-2013

塑料中灰分含量的试验方法

Standard Test Method for Ash Content in Plastics

实施日期：2013-04-01

ASTM D922-2011

非硬质聚氯乙烯管规格

Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing

适用范围：<p id="s00002">1.1 This specification covers nonrigid tubing of vinyl chloride polymer or its copolymers with other materials for use in electrical insulation in three grades, as follows:</p> <p id="s...

实施日期：2011-08-01

ASTM C1159-1998(2008)

耐化学腐蚀刚性硫磺混凝土用硫磺聚合物水泥和硫磺改性剂的规格

Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant,Rigid Sulfur Concrete

适用范围：<p id="s00002">1.1 This specification covers the requirements for sulfur polymer cement and sulfur modifier for use in rapid setting and high strength applications of chemical-resistant sulfur concrete...

实施日期：1998-03-10

ASTM D5849/D5849M-2007(2013)e1

Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)

实施日期：2007-07-01

ASTM F2919/F2919M-2012

板材上带可变网格或网眼大于6 in.2[3871 mm2]的焊接钢丝网(金属覆层或聚合物覆层的)标准规范

Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2[3871 mm2] in Panels

适用范围：<p id="s00002">1.1 This specification covers welded wire mesh fence fabric produced from steel wire or metallic-coated steel wire. The metallic-coated fabric may be polymer coated after fabrication.</p...

实施日期：2012-03-01

NF P83-009-2011

Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures.

ASTM F1635-2011

外科植入物用水解降解聚合体树脂和制成品体外降解测试的试验方法

Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

适用范围：<p>This test method is intended to help assess the degradation rates (that is, the mass loss rate) and changes in material or structural properties, or both, of HDP materials used in surgical implants....

实施日期：2011-03-01

ASTM F1043-2008

工业用钢防护网结构强度和防护镀层规格

Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework

适用范围：<p id="s00002">1.1 This specification covers the strength and protective coating requirements for industrial steel chain link fence framework. Maximum allowable heights of framework and post spacing ar...

实施日期：2008-08-01

ASTM A762/A762M-2008

下水道和排水沟用聚合物预涂波纹钢管的规格

Standard Specification for Corrugated Steel Pipe,Polymer Precoated for Sewers and Drains

实施日期：2008-05-01