ASTM A90/A90M-2011

带有锌或锌合金涂层的钢铁上的涂层重量[质量]的标准试验方法

Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

适用范围：<p>This test method provides a standard method for determining the weight [mass] of coating for comparison with specification requirements. A coating of zinc on iron or steel articles provides protecti...

实施日期：2011-11-01

ASTM A1018/A1018M-2015

Standard Specification For Steel,Sheet And Strip,Heavy-Thickness Coils,Hot-Rolled,Carbon,Commercial,Drawing,Structural,High-Strength Low-Alloy,High-Strength Low-Alloy With Improved Formability,And Ultra-High Strength

实施日期：2015-09-01

ASTM A653/A653M-2015e1

Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy- Coated (Galvannealed) by the Hot-Dip Process

发布日期：2015-07-01  实施日期：2015-07-01

ASTM A755/A755M-2011

外露建筑材料用热浸涂覆和用卷涂工艺预涂的钢薄板的标准规范

Standard Specification for Steel Sheet,Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

实施日期：2011-11-01

ASTM A1008/A1008M-2012

改进可成形性、溶解变硬的和可烧结硬化的高强度低合金、高强度低合金、结构、冷轧炭薄钢板用标准规范

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

实施日期：2012-03-01

ASTM A264-2011

镀铬镍不锈钢中厚板规格

Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

适用范围：<p id="s00002">1.1 This specification covers plate of a carbon steel or low-alloy steel base to which is integrally and continuously bonded on one or both sides a layer of stainless chromium-nickel st...

实施日期：2011-11-01

ASTM A568/A568M-2011b

结构和高强度低合金热轧和冷轧碳钢薄板材的一般要求用标准规范

Standard Specification for Steel,Sheet,Carbon,Structural,and High-Strength,Low-Alloy,Hot-Rolled and Cold-Rolled,General Requirements for

实施日期：2011-10-01

ASTM A568/A568M-2014

高强度低合金热轧和冷轧碳素结构钢薄板一般要求规格

Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

发布日期：2014-10-01  实施日期：2014-10-01

ASTM A719/A719M-2002(2007)

磁性材料分层系数试验方法

Standard Test Method for Lamination Factor of Magnetic Materials

实施日期：2002-10-10

ASTM A480/A480M-2012

平轧不锈钢和耐热钢厚板材,薄板材和带材的一般要求用标准规格

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate,Sheet,and Strip

实施日期：2012-04-01

ASTM A666-2015

退火的或冷加工的奥氏体不锈钢薄板、带材、中厚板和扁材规格

Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

适用范围：This specification covers austenitic stainless steels in the annealed and normally required cold-worked conditions. They shall be formed in different shapes such as sheets, strips, plates and flat bars...

发布日期：2015-03-01  实施日期：2015-03-01

ASTM A1087/A1087M-2016

Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet

发布日期：2016-05-01  实施日期：2016-05-01

ISO 10510-2011

自攻螺钉和平垫圈组合件

Tapping screw and washer assemblies with plain washers

适用范围：ISO 10510:2011 specifies the requirements for tapping screws and plain washer assemblies with spaced threads from ST2,2 to ST9,5 inclusive, flat seating heads and mechanical properties as specified in ...

发布日期：2011-04-01  实施日期：2011-04-01

ASTM A1030/A1030M-2016

Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products

发布日期：2016-05-01  实施日期：2016-05-01

ASTM A1018/A1018M-2016

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

发布日期：2016-05-01  实施日期：2016-05-01

ASTM A754/A754M-2008

用X射线荧光法测定钢上金属镀层的镀层重量（质量）的试验方法

Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence

适用范围：<p id="s00002">1.1 This test method covers the use of X-ray fluorescence (XRF) for determining the coating weight (mass) of metallic coatings on steel sheet. The test method is intended to be used for ...

实施日期：2008-11-01

ASTM A721/A721M-2002(2011)

Standard Test Method for Ductility of Oriented Electrical Steel

实施日期：2002-10-10

ASTM A109/A109M-2008

冷轧碳（最大0.25%）钢带规格

Standard Specification for Steel,Strip,Carbon (0.25 Maximum Percent),Cold-Rolled

发布日期：2008-10-01  实施日期：2008-10-01

ASTM A720/A720M-2002(2007)

无向电工用钢延性试验方法

Standard Test Method for Ductility of Nonoriented Electrical Steel

适用范围：<p>This is a specialized bend test for nonoriented electrical steel not covered under the provisions of Test Methods E 290<astmref rid="a00006">. </p> <p>This test is applicable to nonoriented silicon ...

实施日期：2002-10-10

ASTM A755/A755M-2016

Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

发布日期：2016-05-01  实施日期：2016-05-01