NF A95-322-2009

除硬质合金外的烧结金属材料.拉伸试验样件

Sintered metal materials, excluding hardmetals - Tensile test pieces.

ASTM F1588-1996(2011)

Standard Test Method for Constant Tensile Load Joint Test (CTLJT)

实施日期：1996-03-10

ASTM D7737/D7737M-2015

Standard Test Method For Individual Geogrid Junction Strength

实施日期：2015-07-01

EN ISO 20753-2014

Plastics - Test specimens

实施日期：2014-05-01

DIN EN ISO 2740-2009

烧结金属材料（不包括硬质合金） 拉伸试验试样

Sintered metal materials, excluding hardmetals - Tensile test pieces

适用范围：This International Standard is applicable to all sintered metals and alloys, excluding hardmetals.This International Standard specifies: the die cavity dimensions used for making tensile test piece...

实施日期：2009-10-01

ASTM D6992-2003(2009)

用阶梯等温法对基于时间-温度重叠的土工合成材料加速拉伸蠕变和蠕变断裂的试验方法

Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

适用范围：<p>Use of the Stepped Isothermal Method decreases the time required for creep to occur and the obtaining of the associated data.</p> <p>The statements set forth in 1.6 are very important in the context...

实施日期：2003-12-01

NF A05-501-4-1995

Corrosion of metals and alloys. Stress corrosion testing. Part 4 : preparation and use of uniaxially loaded tension specimens.

ASTM D6637-2010

用单边或多边拉伸法测定土工格栅拉伸特性的试验方法

Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

适用范围：<p>The determination of the tensile force-elongation values of geogrids provides index property values. This test method shall be used for quality control and acceptance testing of commercial shipments...

实施日期：2010-03-01

ASTM D7556-2010

用空气反复张力试验法测定土工格栅和土工纺织品小应变张力性能的试验方法

Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests

适用范围：<p>Test Methods A, B, and C provide a means of evaluating the tensile modulus of geogrids and geotextiles for applications involving small-strain cyclic loading. The test methods allow for the determin...

实施日期：2010-02-01

ASTM C1275-2015

Standard Test Method For Monotonic Tensile Behavior Of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens At Ambient Temperature

实施日期：2015-07-01

ASTM D7234-2012

用便携式拉脱附着力测试仪测定混凝土上覆层拉脱附着强度的试验方法

Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

实施日期：2012-07-01

ASTM D7737-2011

单独土工格栅接合强度试验方法

Standard Test Method for Individual Geogrid Junction Strength

适用范围：<p>This index test method is to be used to determine the strength of an individual junction in a geogrid product. The test is performed in isolation, while in service the junction is typically confined...

实施日期：2011-09-15

ASTM B598-2014a

铜合金压力下残余变形屈服强度测定规程

Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys

适用范围：This practice may be used for approximating a limiting design stress at room temperature and, in some cases, for approximating the range of elastic behavior. Elastic limit, or the greatest stress that ...

发布日期：2014-09-01  实施日期：2014-09-01

ASTM B49-2016

Standard Specification for Copper Rod for Electrical Purposes

发布日期：2016-04-01  实施日期：2016-04-01

ASTM C1359-2011

高温下带实心矩形截面试样的连续纤维增强高级陶瓷的单值抗拉强度试验的标准试验方法

Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber. Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures

适用范围：<p>This test method may be used for material development, material comparison, quality assurance, characterization, reliability assessment, and design data generation.</p> <p>Continuous fiber-reinforc...

实施日期：2011-07-15

ASTM E2218-2002(2008)

测定成形极限曲线的试验方法

Standard Test Method for Determining Forming Limit Curves

实施日期：2002-06-10

ASTM F1588-1996(2007)

恒定拉力负荷机械接头测试(CTLJT)试验方法

Standard Test Method for Constant Tensile Load Joint Test (CTLJT)

适用范围：<p>This test method was designed to be used to validate the long-term resistance to pullout of joints designed for use in plastic natural gas piping systems. </p> <p>This test method is used in additio...

实施日期：1996-03-10

ASTM D6992-2016

Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

发布日期：2016-02-15  实施日期：2016-02-15

ASTM F2928-2013

用拉伸和水压试验方法测试聚乙烯管熔接的试样与测试条件规程

Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods

实施日期：2013-08-01

ASTM D6638-2011

土工合成加固和分段式混凝土构件间连接强度的测定用标准试验方法(模数混凝土块)

Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)

适用范围：<p id="s00021">The connection strength between geosynthetic reinforcement and segmental concrete block units is used in design of reinforced soil retaining walls.</p> <p id="s00022">This test is used ...

实施日期：2011-06-01