DIN 13-51-2005

ISO常用米制螺纹 第51部分:过渡配合用外螺纹(以前为密配合螺纹) 公差、极限偏差、尺寸极限

ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes

适用范围：The standard specifies tolerance classes for external screw thread.

实施日期：2005-08-01

DIN 13-21-2005

ISO常用米制螺纹 第21部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径1-24.5mm

ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 1 mm to 24, 5 mm

适用范围：This standard applies to the ISO general purpose metric screw threads with a basic profile according to DIN ISO 68-1. It contains the limits of sizes for fine threads from 1 mm to 24,5 mm nominal sizes...

实施日期：2005-08-01

DIN 13-22-2005

ISO常用米制螺纹 第22部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径25-52mm

ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm

实施日期：2005-08-01

ISO 10317-2008

滚动轴承 圆锥滚子轴承 命名系统

Rolling bearings -- Tapered roller bearings -- Designation system

适用范围：ISO 10317:2008 establishes a system for the designation of metric size tapered roller bearings produced in accordance with ISO 355. The system covers designations for single-row bearings, double-row be...

发布日期：2008-11-01  实施日期：2008-11-01

DIN ISO 965-2-1999

ISO一般用途米制螺纹.公差.第2部分:一般用途的内螺纹和外螺纹的尺寸极限.中等质量

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998)

EN 14603-2004

Information technology. Alphanumeric glyph image set for optical character recognition OCR-B. Shapes and dimensions of the printed image

实施日期：2004-12-01

DIN 13-24-2005

ISO通用米制螺纹 第24部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径112-180 mm

ISO metric screw threads; limits of sizes for fine screw threads within the range 112 to 180 mm nominal diameter, together with the commonly used tolerance classes

适用范围：This standard applies to the ISO general purpose metric screw threads with a basic profile according to DIN ISO 68-1. It contains the limits of sizes for fine threads from 112 mm to 180 mm nominal size...

实施日期：2005-08-01

DIN 405-2-1997

通用圆螺纹.第2部分:偏差和公差

General purpose knuckle threads - Part 2: Deviations and tolerances

DIN 13-20-2000

ISO米制螺纹.公称直径1～68mm的粗牙螺纹的极限尺寸.常用公差带

ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm

适用范围：The document applies for ISO metric threads with basic profile according to DIN ISO 68-1.

DIN 13-26-2005

ISO常用米制螺纹 第26部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径252-1000 mm

ISO metric screw threads; limits of sizes for fine screw threads within the range 252 to 1000 mm nominal diameter, together with the commonly used tolerance classes

适用范围：This standard applies to the ISO general purpose metric screw threads with a basic profile according to DIN ISO 68-1. It contains the limits of sizes for fine threads from 252 mm to 1000 mm nominal siz...

实施日期：2005-08-01

NF E03-005-1-2003

Pipe threads where pressure-tight joints are not made on the threads - Part 1 : dimensions, tolerances and designation.

DIN 65304-2009

Aerospace - Sealing ring - Technical specification

实施日期：2009-10-01

NF E22-341-2009

Rolling bearings - Tapered roller bearings - Designation system.

BS EN ISO 228-1-2003

螺纹上无压力密闭接头的管子螺纹 第1部分:尺寸,公差和命名 连同BS EN ISO 228-2:2003,替代BS 2779:1986

Rohrgewinde fuer nicht im Gewinde dichtende Verbindungen. Masse,Toleranzen und Bezeichnung Pipe threads where pressure-tight joints are not made on the threads Part 1:Dimensions,tolerances and designat...

适用范围：This part of ISO 228 specifies the requirements for thread form, dimensions, tolerances and designation forfastening pipe threads, thread sizes 1/16 to 6 inclusive. Both internal and external threads a...

实施日期：2003-02-26

DIN EN 1529-2000

门.高、宽、厚和面积.公差等级

Door leaves - Height, width, thickness and squareness - Tolerance classes; German version EN 1529:1999

ISO 5855-3-1999

航空航天－ＭＪ螺纹－第３部分:流体系统管接头螺纹系统的极限尺寸

Aerospace -- MJ threads -- Part 3: Limit dimensions for fittings for fluid systems

发布日期：1999-10-01  实施日期：1999-10-01

DIN 13-23-2005

ISO常用米制螺纹 第23部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径53-110 mm

ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm

适用范围：This standard applies to the ISO general purpose metric screw threads with a basic profile according to DIN ISO 68-1. It contains the limits of sizes for fine threads from 53 mm to 110 mm nominal sizes...

实施日期：2005-08-01

NF E74-300-2006

螺钉和螺母用装配工具--扳手和套筒开口--一般用途的公差

Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use.

NF A89-300-1996

Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position.

EN ISO 228-1-2003

Pipe threads where pressure-tight joints are not made on the threads. Part 1:Dimensions,tolerances and designation ISO 228-1:2000

实施日期：2003-02-26