EN 4133-2009

Aerospace series. Bolts,normal hexagonal head,coarse tolerance normal shank,long thread,in titanium alloy,aluminium IVD coated. Classification:1 100 MPa (at ambient temperature) / 425 Degrees C

实施日期：2009-04-01

NF E25-801-9-2009

High-strength structural bolting assemblies for preloading - Part 9 : system HR or HV - Direct tension indicators for bolt and nut assemblies.

NF L24-143-2006

Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification : 1 550 MPa (at ambient temperature) / 315 oC.

ISO 272-1982

紧固件. 六角产品. 对边宽度

Fasteners -- Hexagon products -- Widths across flats

适用范围：Specifies the widths to be used in the respective product standards; it sets out a logical ratio between underhead (or nut) bearing area and the tensile stress area of the screw thread.

发布日期：1982-01-01  实施日期：1982-01-01

DIN EN ISO 898-1-2013

碳钢和合金钢制紧固件的机械性能 第1部分:带指定特性的螺栓、螺钉和螺柱 粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread (ISO 898-1:2013)

实施日期：2013-05-01

DIN EN 14219-2003

米制细牙螺纹六角法兰面螺栓 小系列

Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)

适用范围：This standard specifies the characteristics for hexagon bolts with flange, small series, fine pitch thread.

实施日期：2007-06-01

EN 3308-1996

Aerospace Series. Screws,Normal Hexagonal Head,Threaded to Head,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1100 MPa (at Ambient Temperature)/315 Degrees C

实施日期：1996-08-01

DIN EN 24015-1991

带颈六角头螺栓.产品等级B

Hexagon head bolts with reduced shank (shank diameter <ca> pitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991

适用范围：This standard contains dimensional and technical requirements of hexagon head bolts, reduced shank, produkt grade B and specifies their designation.

NF E25-115-2-2011

Hexagon head screws - Product grade C.

NF E25-856-1999

Hexagon washer head drilling screws with tapping screw thread.

ISO 898-1-2009

碳钢和合金钢制紧固件的机械性能 第1部分:带指定特性的螺栓、螺钉和螺柱 粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread

适用范围：ISO 898-1:2009 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners — th...

发布日期：2009-04-01  实施日期：2009-04-01

DIN EN 3324-2008

Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV 535) - Classification: 1000 MPa/550℃ - Unplated

实施日期：2008-05-01

DIN 65115-1986

航空和航天. 带缩杆和MJ螺纹的六角头螺栓. 温度可达235 ℃, 额定抗拉强度1100MPa

Aerospace; hexagon bolts with waisted shank and MJ thread, steel nominal tensile strength 1100 MPa, for temperatures up to 235 <Grad>C

适用范围：This standard contains specifications pertinent to manufacture and use such as dimensions and designation, material, thread, surface treatment, marking and technical specifications.

DIN EN 2859-2008

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1100 MPa (at ambient temperature)/235 ℃

实施日期：2008-02-01

BS EN 3613-2009

Luft-und Raumfahrt. Sechskantschrauben,Dünnschaft,langes Gewinde,aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718),versilbert. Klasse:1275 MPa/650 °C Aerospace series. Bolts,normal hexagonal head,relieved shank,long thread,in heat resisting nickel base alloy NIPH2601 (Inconel 718),silver plated. Classification:1 275 MPa/650 Degree C Série aérospatiale. Vis. tête hexagonale normale,f?t dégag filetage long,en alliage base nickel,résistant. chaud NI-PH2601 (Inconel 718),argentées. Cla

实施日期：2009-07-31

DIN EN 2887-1995

航空和航天.标准六角头、全螺纹、耐蚀钢制钝化螺栓.等级:600MPa(大气温度)/425℃

Aerospace series - bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 <Grad>C; German version EN 2887:1995

NF E25-112-2011

六角头螺栓.A和B级产品

Hexagon head bolts - Product grades A and B.

NF L22-207-1984

带紧锁孔通用六角头螺钉 ISO 螺纹

Bolt, hexagonal head, with locking hole, current use. ISO thread.

JB/T 8043.1-1999

机床夹具零件及部件 塑料夹具用六角头螺钉

Hex screw for platic fixture

适用范围： JB/T 8043.1-1999 本标准是对 JB/T 8043.1-95《机床夹具零件及部件 塑料夹具用六角头螺钉》的修订，修订时仅按有关规定作了编辑性修改，技术内容没有改变。 本标准规定了螺纹规格为 M12×1.25～M24×1.5 的塑料夹具...

实施日期：2000-01-01

EN ISO 15480-1999

Hexagon Washer Head Drilling Screws with Tapping Screw Thread ISO 15480:1999

实施日期：1999-09-01