ISO 8504-2-2000

涂装油漆和有关产品前钢材预处理 表面预处理方法 第2部分:磨料喷射清理

Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 2: Abrasive blast-cleaning

适用范围：This part of ISO 8504 describes abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products. It also contains information on the effectiveness ...

发布日期：2000-03-01  实施日期：2000-03-01

BS EN ISO 11125-5-1994

Vorbereitung von Stahloberflaechen vor dem Auftragen von Beschichtungsstoffen. Pruefverfahren fuer metallische Strahlmittel. Bestimmung des Anteils an schadhaften Teilchen und des Gefueges Preparation of Steel Substrates Before Application of Paints and Related Products-Test Methods for Metallic Blast-Cleaning Abrasives-Part 5:Determination of Percentage Defective Particles and of Microstructure Preparation des subjectiles d'acier avant application de peintures et de produits assimiles. Methodes

实施日期：1994-03-15

JIS G5903-1975

铸造铁刃及铁砂

Cast shot and grit

适用范围：この規格は，プラストクリー=ソグ，ピーニソグ，ェッチソグその他に用いる鋳鉄又は鋳鋼製のショット及びグリット(以下，ショット及びグリットという。)の粒度について規定する。

DIN EN ISO 11124-3-1997

应用涂料和有关制品前钢基材的制备.金属喷砂清理研磨料规范.第3部分:高碳铸钢铅砂粒和粗砂

Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993...

适用范围：The document specifies requirements for 14 grades of high carbon cast steel shot and 12 grades of hogh carbon cast steel grit, as supplied for blast-cleaning processes. Values are specified for hardnes...

ISO 11125-2-1993

涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定

Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution

适用范围：Specifies a test method for the determination of particle size distribution by sieving. The procedure includes weighing out a test portion of 100 g of the sample, placing the test portion in the top si...

发布日期：1993-12-01  实施日期：1993-12-01

DIN EN ISO 8503-5-2005

涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第5部分: 测定表面轮廓的复制带方法

Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determina...

适用范围：This part of ISO 8503 describes a field method for measuring the surface profile produced by any of the abrasive blast-cleaning procedures given in ISO 8504-2.

ISO 11125-7-1993

涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第7部分:含水量测定

Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 7: Determination of moisture

适用范围：Specifies a test method for the determination of the level of free moisture present determined by measuring the mass lost on heating. Annex A gives information on the international standards series for...

发布日期：1993-12-01  实施日期：1993-12-01

NF L10-301-1989

Aerospace series. Dry abrasive blasting of titanium and titanium alloys.

ISO 11124-2-1993

涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第2部分:冷硬铸铁丸

Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit

适用范围：Specifies requirements for 12 grades of chilled-iron grit abrasive: designation, sampling, package identification and lot traceability, information to be supplied by the manufacturer or supplier, range...

发布日期：1993-12-01  实施日期：1993-12-01

ISO 11126-4-1993

涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第4部分:煤炉渣

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag

适用范围：Specifies requirements for coal furnace slag abrasives: designation, sampling, identification and marking, information to be supplied by the manufacturer or supplier, ranges of particle sizes and value...

发布日期：1993-12-01  实施日期：1993-12-01

DIN EN 12716-2001

特种土工技术的实施.喷浆

Execution of special geotechnical works - Jet grouting; German version prEN 12716:1997

BS EN ISO 11124-1-1994

Vorbereitung von Stahloberflaechen vor dem Auftragen von Beschichtungsstoffen. Anforderungen an metallische Strahlmittel. Allgemeine Einleitung und Einteilung Preparation of Steel Substrates Before Application of Paints and Related Products-Specifications for Metallic Blast-Cleaning Abrasives-Part 1:General Introduction and Classification Preparation des subjectiles d'acier avant application de peintures et de produits assimiles. Specifications pour abrasifs metalliques destines a la preparation

实施日期：1994-03-15

BS EN 4637-2010

Luft-und Raumfahrt. Strahlmittel. Edelkorund,wei?Aerospace series. Blast media. White corundum Série aérospatiale. Produit de projetage. Corindon blanc

实施日期：2010-05-31

ISO 11126-9-1999

涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第9部分:十字石

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 9: Staurolite

发布日期：1999-04-01  实施日期：1999-04-01

EN ISO 8504-2-2001

Preparation of Steel Substrates Before Application of Paints and Related Products. Surface Preparation Methods. Part 2:Abrasive Blast-Cleaning

实施日期：2001-05-01

NF T35-505-4-1997

油漆和类似产品涂敷前钢油漆底层的制备.用于喷射制备的金属磨料规范.第4部分:低碳铸钢圆形屑

Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4 : low-carbon cast-steel shot.

NF T35-508-10-2005

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10 : almandite garnet.

BS EN ISO 8504-2-2001

Preparation of steel substrates before application of paints and related products. Surface preparation methods. Abrasive blast cleaning

实施日期：2000-08-15

ISO 11125-5-1993

涂装油料和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒的百分比和微结构的测定

Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 5: Determination of percentage defective particles and of...

适用范围：Specifies a test method for the determination of particles with cracks, laminations, voids and shrinkage, of defectively shaped shot, grit and cylindrical particles, of microstructure using a microscop...

发布日期：1993-12-01  实施日期：1993-12-01

EN ISO 11126-3-1997

Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3:Copper refinery slag ISO 11126-3:1993

实施日期：1997-07-01