EN 993-11-2007

成形致密耐火制品的试验方法 第11部分: 热冲击阻力的测定

Methods of test for dense shaped refractory products. Part 11:Determination of resistance to thermal shock

实施日期：2007-12-01

BS EN 993-17-1999

成形致密耐火制品的试验方法.真空汞法对颗粒状材料块密度的测定

Methods of test for dense shaped refractory products. Determination of bulk density of granular materials by the mercury method with vacuum

适用范围：This European Standard specifies the determination of the bulk density of granular refractory materials (grain bulk density) having a grain size greater than 2 mm, by the mercury method with vacuum. NO...

ISO 2478-1987

致密的定型耐火制品 重烧体积永久变化的测定

Dense shaped refractory products -- Determination of permanent change in dimensions on heating

发布日期：1987-10-01  实施日期：1987-10-01

BS 1902-4.6-1985

Verfahren zur Pruefung von feuerfesten Werkstoffen. Messung von Eigenschaften unter Belastung. Bestimmung des Abriebwiderstands (Abriebindex) bei Umgebungstemperatur (Verfahren 1902-406) Methods of testing Refractory materials. Part 4:Properties measured under an applied stress. Section 4.6 Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902-406) Methodes d'essai des materiaux refractaires. Proprietes mesurees sous charge. Deter

实施日期：1985-02-28

NF B40-332-1998

Methods of test for dense shaped refractory products. Part 10 : determination of permanent change in dimensions on heating.

DIN EN ISO 1893-2008

耐火制品 荷重软化温度的测定 示差升温法

Refractory products - Determination of refractoriness under load - Differential method with rising temperature

适用范围：This International Standard specifies a method for determining the deformation of dense and insulatingshaped refractory products, when subjected to a constant load under conditions of progressively ris...

实施日期：2008-09-01

BS 1902-5.5-1991

Verfahren zur Pruefung von feuerfesten Werkstoffen. Feuerfestigkeit und thermische Eigenschaften. Bestimmung des Waermeleitvermoegens (Tafelverfahren) Methods of testing Refractory materials. Part 5:Refractory and thermal properties. Section 5.5 Determination of thermal conductivity (panel/calorimeter method) (method 1902-505) Methodes d'essai des materiaux refractaires. Proprietes refractaires et thermiques. Determination de la conductivite thermique par la methode du panneau

实施日期：1991-08-29

BS EN 12475-4-1999

致密成型耐火产品分类.特殊产品

Classification of dense shaped refractory products. Special products

适用范围：This part of EN 12475 establishes the classification and designation of dense shaped refractory products of special composition of the following series: a) oxide-based products: —alumina-chromic oxide;...

ISO 5019-6-2005

耐火砖 尺寸 第6部分:吹氧炼钢转炉用的衬砖

Refractory bricks -- Dimensions -- Part 6: Basic bricks for oxygen steel-making converters

适用范围：ISO 5019-6:2005 specifies the dimensions of basic refractory bricks for use in oxygen steel-making converters.

发布日期：2005-10-01  实施日期：2005-10-01

BS EN ISO 1893-2008

Feuerfeste Erzeugnisse. Bestimmung des Erweichungsverhaltens unter Druck (Druckerweichen). Differentialverfahren mit steigender Temperatur Refractory products. Determination of refractoriness under load. Differential method with rising temperature Produits réfractaires. Détermination de l'affaissement sous charge. Méthode différentielle avec élévation de la température

实施日期：2008-08-29

BS EN 993-13-1995

密封成型耐火制品的检验方法.第13部分:对试验室用参考测温锥的规定

Pruefverfahren fuer dichte geformte feuerfeste Erzeugnisse Festlegungen fuer Referenz-Brenokegel fuer den Laboratoriumsgebrauch Methods of Test for Dense Shaped Refractory Products Part 13:Specificatio...

适用范围：This Part of EN 993 specifies the characteristics of a standard series of pyrometric reference cones, which are used for determining the pyrometric cone equivalent (refractoriness) of refractory materi...

实施日期：1995-01-01

BS EN ISO 8895-2006

Geformte feuerfeste Erzeugnisse fuer Waermedaemmzwecke Bestimmung der Kaltdruckfestigkeit Shaped insulating refractory products Determination of cold crushing strength Produits refractaires isolants fa?onnes. Determination de la resistance a l'ecrasement a temperature ambiante :1995

实施日期：2006-07-31

BS EN 993-1-1995

成形致密耐火制品的试验方法.第1部分:松密度,表观孔隙度和实际孔隙度的测定

Pruefverfahren fuer dichte geformte feuerfeste Erzeugnisse Bestimmung der Rohdichte,offenen Porositaet und Gesamtporositaet Methods of Test for Dense Shaped Refractory Products Part 1:Determination of ...

适用范围：This Part of EN 993 specifies a method for the determination of the bulk density, apparent porosity and true porosity of dense shaped refractory products. NOTE. For shaped insulating refractory product...

实施日期：1995-05-15

EN ISO 16282-2008

Methods of test for dense shaped refractory products. Determination of resistance to abrasion at ambient temperature

实施日期：2008-05-01

NF B40-315-2009

Refractory products - Determination of refractoriness under load - Differential method with rising temperature.

GB/T 5072-1985

致密定形耐火制品常温耐压强度试验方法

实施日期：1986-01-01

BS ISO 10081-4-2007

Klassifizierung dichter geformter feuerfester Erzeugnisse. Sondererzeugnisse Classification of dense shaped refractory products. Part 4:Special products Classification des produits réfractaires fa?onnés denses. Produits spéciaux

实施日期：2007-08-31

BS EN 993-5-2000

致密成型耐火制品试验方法.低温抗压强度的测定

Methods of test for dense shaped refractory products. Determination of cold crushing strength

适用范围：This European Standard specifies a method of determination of the cold crushing strength of dense shaped refractory products.

GB 4758.1-1984

粘土质和高铝质耐火可塑料

Fireclay and high alumina plastic refractories

GB 4758.5-1984

粘土质和高铝质耐火塑料可塑性指数试验方法

Test method for workability index of fireclay and high alumina plastic refractories