全部退出     登录    |     注册     |

检索结果

文献类型：
强制标准：
标准分类：
标准状态：
标准组织：
发布年份：
请选择
 至
请选择
检索“关键词:"紧配合螺纹"”共找到 213 条标准
  全选
排序： 最相关 发布日期 ↓

DIN 802-5-1997

螺纹丝锥的公差.第5部分:ISO米制螺纹的基本螺纹丝锥.按DIN 8141-1的粗牙和细牙的界面配合螺纹

Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances...

适用范围：The document specifies the manufacturing tolerances of the threaded portion of taps used to make ISO metric threads for interference fits according to DIN 8141-1.

添加收藏
导出文件

DIN EN ISO 10512-1998

通用扭矩型六角螺母(带非金属垫圈).1型.米制细牙螺纹、性能类别6、8和10

Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:1997); German version EN ISO 10512:1997

适用范围：The document contains dimensional and technical requirements of prevailing torque type hexagon nuts (with non-metallic inserts) with metric fine pitch thread and specifies their designation.

添加收藏
导出文件

DIN 13-23-2005

ISO常用米制螺纹 第23部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径53-110 mm

ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm

适用范围：This standard applies to the ISO general purpose metric screw threads with a basic profile according to DIN ISO 68-1. It contains the limits of sizes for fine threads from 53 mm to 110 mm nominal sizes...

实施日期：2005-08-01

添加收藏
导出文件

DIN EN 3304-1996

航空和航天.钛合金制、阳极氧化、MoS2润滑、小间隙、标准杆、短螺纹、100°沉孔螺钉.等级:1100MPa(在大气温度下)/315℃

Aerospace series - Screws, 100<Grad> countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at am...

适用范围：The document specifies the characteristics of screws, 100?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubri...

添加收藏
导出文件

DIN EN 3306-1996

航空和航天.100°沉孔、标准头、分叉十字凹口、全螺纹、钛合金制、氧化处理、MoS2润滑螺钉.等级:1100MPa(在大气温度下)/315℃

Aerospace series - Screws, 100<Grad> countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient tem...

适用范围：The document specifies the characteristics of screws, 100?countersunk normal head, offset cruciform-ribbed recess, threaded to head, in titanium alloy, MoS<(Index)2> lubricated, classification 1100 MPa...

添加收藏
导出文件

DIN EN ISO 898-1-2013

碳钢和合金钢制紧固件的机械性能 第1部分:带指定特性的螺栓、螺钉和螺柱 粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread (ISO 898-1:2013)

实施日期：2013-05-01

添加收藏
导出文件

BS EN 4499-2009

Luft-und Raumfahrt. 100 Senk-Pa?schrauben,mit kleinem Kopf,mit Flügelkreuzschlitz,kurzes Gewinde,aus Titanlegierung,anodisiert,mit Aluminium pigmenttete Beschichtung. Klasse:1100 MPa (bei Raumtemperatur) / 315 °C Aerospace series. Screws,100 Degree countersunk reduced head,offset cruciform recess,close tolerance normal shank,short thread,in titanium alloy,anodized,with aluminium pigmented coating. Classification:1 100 MPa (at ambient temperature) / 315 Degree C Série aérospatiale. Vis. tête frai

实施日期：2009-03-31

添加收藏
导出文件

CNS 492-1955

韦氏螺纹(尖端无空隙)

Whitworth Thread (Without Tip Clearance)

发布日期：1955-09-24  实施日期：1955-09-24

添加收藏
导出文件

BS 4A 111-1993

Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks

实施日期：1993-01-01

添加收藏
导出文件

EN ISO 21670-2003

Hexagon weld nuts with flange ISO 21670:2003

实施日期：2003-10-01

添加收藏
导出文件

DIN EN 14219-2003

米制细牙螺纹六角法兰面螺栓 小系列

Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)

适用范围：This standard specifies the characteristics for hexagon bolts with flange, small series, fine pitch thread.

实施日期：2007-06-01

添加收藏
导出文件

ISO 8675-2012

带公制细牙螺纹的无倒角六角薄螺母（类型0）--产品等级A和B

Hexagon thin nuts chamfered (style 0) with metric fine pitch thread -- Product grades A and B

适用范围：ISO 8675:2012 specifies the characteristics of chamfered hexagon thin nuts (style 0), with metric fine pitch thread, with nominal thread diameters from 8 mm up to and including 64 mm, with product grad...

发布日期：2012-12-01  实施日期：2012-12-01

添加收藏
导出文件

DIN EN ISO 8675-2001

六角薄螺母,米制细牙.产品等级A和B

Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999); German version EN ISO 8675:2000

添加收藏
导出文件

DIN 13-24-2005

ISO通用米制螺纹 第24部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径112-180 mm

ISO metric screw threads; limits of sizes for fine screw threads within the range 112 to 180 mm nominal diameter, together with the commonly used tolerance classes

适用范围：This standard applies to the ISO general purpose metric screw threads with a basic profile according to DIN ISO 68-1. It contains the limits of sizes for fine threads from 112 mm to 180 mm nominal size...

实施日期：2005-08-01

添加收藏
导出文件

DIN 13-3-1999

ISO米制螺纹.螺距0.5mm；螺纹直径3.5～90mm的细牙螺纹.尺寸

ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm

适用范围：The document specifies nominal sizes.

添加收藏
导出文件

DIN 1816-1971

头部带十字槽的圆螺母

Round Nut with Set Pin Holes Inside; ISO Metric Fine Thread

适用范围：Round nut with set pin holes inside

添加收藏
导出文件

ISO 898-1-2009

碳钢和合金钢制紧固件的机械性能 第1部分:带指定特性的螺栓、螺钉和螺柱 粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread

适用范围：ISO 898-1:2009 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners — th...

发布日期：2009-04-01  实施日期：2009-04-01

添加收藏
导出文件

ISO 10513-1997

有效力矩型全金属六角螺母 2型 米制细牙螺纹 性能等级8、10和12级

Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread -- Property classes 8, 10 and 12

发布日期：1997-10-01  实施日期：1997-10-01

添加收藏
导出文件

EN 3304-1996

Aerospace Series. Screws,100 Degree Countersunk Reduced Head,Offset Cruciform Recess,Close Tolerance Normal Shank,Short Thread,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1 100 MPa (at Ambient Temperature)/315 Degrees C

实施日期：1996-09-01

添加收藏
导出文件

DIN 65440-1984

航空和航天.MJ螺纹的十二角头紧公差螺钉.不锈钢制,中等长度螺纹;额定抗拉强度1250MPa,温度315℃以下

Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in corrosion resisting steel, nominal tensile strength 1250 MPa, for temperatures up to 315 <Grad>C

添加收藏
导出文件

查看标准

请选择需要导出的字段：

查看标准

请选择需要导出的字段：

已选中条标准
批量导出
批量加入收藏夹
清空已选标准
成功收藏条标准
检查到条标准已经存在收藏夹中，不再为您重复添加。
成功收藏条标准。
检查到条标准已经存在收藏夹中，不再为您重复添加。
请重新选择标准添加。

知识产权声明 | 服务承诺 | 联系我们 | 客户服务 | 关于我们

互联网出版许可证：新出网证(京)字042号 互联网药品信息服务资格证书号：(京)-经营性-2011-0017 信息网络传播视听节目许可证 许可证号：0108284

万方数据标准管理系统V1.0 证书号:软著登字第4252816号

京ICP证：010071 京公网安备11010802020237号 京ICP备08100800号-1

客服电话：4000115888 客服邮箱：service@wanfangdata.com.cn 违法和不良信息举报电话：4000115888 举报邮箱：problem@wanfangdata.com.cn 举报专区：https://www.12377.cn

万方数据知识服务平台--国家科技支撑计划资助项目（编号：2006BAH03B01）©北京万方数据股份有限公司 万方数据电子出版社