DIN 38402-45-2003

德国对水,废水和淤泥的统一检验法 一般说明(A组) 实验室外部质量控制的对比试验(A45)

German standard methods for the examination of water, waste water and sludge; general information (group A); Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A45)

适用范围：This standard specifies requirements on carrying out interlaboratory trials for external quality control of laboratories. With respect to the purpose the standard differs from DIN 38402-41 and DIN 3840...

NF X06-041-1-1994

Application of statistics. Accuracy (trueness and precision) of measurement methods and results. Part 1 : general principles and definitions.

NF X06-048-4-2004

Capability of detection - Part 4 : methodology for comparing the minimum detectable value with a given value.

DIN EN 27574-3-1989

声学;测定和检验机械和设备发出噪声值的统计方法;第3部分:一组机床规定噪声值的简单(过渡)方法

Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 3: simple (transition) method for stated values for batches of machines; (iden...

适用范围：The standard specifies mainly the method for verifying stated noise emission values for batches of machines, if for the specific family of machines no specific statistical specifications are made.#,,#

NF S31-078-3-1989

Acoustics. Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Part 3 : simple (transition) method for stated values for batches of machines.

ISO 5725-5-1998

测试方法和结果的准确性(正确性和精确性) 第5部分:确定标准测试方法精密度的可替代方法

Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method

发布日期：1998-07-01  实施日期：1998-07-01

DIN 13303-1-1982

随机学 概率论、数理统计学和描述统计学的一般基本概念 概念和符号

Stochastics; probability theory, common fundamental concepts of mathematical and of descriptive statistics; concepts, signs and symbols

适用范围：Stochastics; probability theory, common fundamental concepts of mathematical and of descriotive statistics;concepts, signs and symbols

BS 6001-3-2005

计数抽样检验程序.跳批抽样程序规范

Annahmestichprobenpruefung anhand der Anzahl fehlerhafter Einheiten oder Fehler (Attributpruefung). Skip-Lot-Verfahren Sampling procedures for inspection by attributes Part 3:Skip-lot sampling procedur...

适用范围：This part of ISO 2859 specifies generic skip-lot sampling procedures for acceptance inspection by attributes. The purpose of these procedures is to provide a way of reducing the inspection effort on pr...

实施日期：2005-06-23

GB/T 14573.4-1993

声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第四部分: 成批机器标牌值的确定和检验方法

Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 4:Methods for stated values for batches of machines

适用范围：本标准规定了确定与检验批量生产的机器噪声辐射值(如铭牌值、噪声限值、协商值、标牌值)的统计学方法。　　本标准适用于确定和检验批量机器生产的机器设备的标牌值。　　对批量机器进行检验其规定值得不到肯定时，本标准不作处理...

发布日期：1993-08-28  实施日期：1994-03-01

GB/Z 24638-2009

产品几何技术规范（GPS) 线性和角度尺寸与公差标注+/-极限规范 台阶尺寸、距离、角度尺寸和半径

Geometrical Product Specifications(GPS)-Linear and angular dimensioning and tolerancing limit specifications-Step dimensions distances angular sizes and radii

适用范围：本指导性技术文件规定了功能只与两个要素相关时的台阶尺寸、距离、角度尺寸和半径的±极限规范。本指导性技术文件仅适用于标有“GB/Z 24638”的图样。

发布日期：2009-11-15  实施日期：2010-09-01

GB/T 26937-2011

统计集装箱量的换算单位

Conversion unit of quantitative analysis for freight containers

适用范围：本标准规定了集装箱的换算原则和换算单位。 本标准适用于符合 GB/T 1413 所规定的各种类型集装箱的数量统计，其他规格集装箱可参照执行。

发布日期：2011-09-29  实施日期：2012-05-01

DIN EN 60216-6-2007

Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method (IEC 60216-6:2006)

实施日期：2007-06-01

DIN ISO 5479-2004

数据的统计解释 偏离正态分布的检验

Statistical interpretation of data - Tests for departure from the normal distribution

适用范围：Many statistical techniques assume that the data to be analyzed are normally distributed or approximately normally distributed. In case of doubt this assumption needs to be proved. For this purpose the...

NF C91-022-2007

Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement.

GB/T 16671-2009

产品几何技术规范（GPS）　几何公差 最大实体要求、最小实体要求和可逆要求

Geometrical product specifications(GPS) - Geometrical tolerancing - Maximum material requirement（MMR），least material requirement（LMR） and reciprocity requirement（RPR）

适用范围：本标准规定了最大实体要求、最小实体要求和可逆要求的术语和定义、基本规定、图样表示方法及应用示例。　　本标准适用于工件尺寸与几何公差需彼此相关以满足其特殊功能要求的情况，例如满足零件可装配性(最大实体要求)、保证最...

发布日期：2009-03-16  实施日期：2009-11-01

NF X06-041-4-1994

Application of statistics. Accuracy (trueness and precision) of measurement methods and results. Part 4 : basic methods for the determination of the trueness of a standard measurement method.

ISO 14802-2012

金属和合金的腐蚀 运用统计学分析腐蚀数据的指南

Corrosion of metals and alloys -- Guidelines for applying statistics to analysis of corrosion data

适用范围：ISO 14802:2012 gives guidance on some generally accepted methods of statistical analysis which are useful in the interpretation of corrosion test results. ISO 14802:2012 does not cover detailed calcula...

发布日期：2012-07-01  实施日期：2012-07-01

ISO 2859-3-2005

计数抽样检验程序 第3部分:跳批抽样检验程序

Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures

适用范围：ISO 2859-3:2005 specifies generic skip-lot sampling procedures for acceptance inspection by attributes. The purpose of these procedures is to provide a way of reducing the inspection effort on products...

发布日期：2005-05-01  实施日期：2005-05-01

BS EN 61164-2004

可靠性增长.统计试验和估计方法

Zuverlaessigkeitswachstum. Statistische Pruef-und Schaetzverfahren Reliability growth Statistical test and estimation methods Croissance de la fiabilite. Tests et methodes d'estimation statistiques Sup...

适用范围：This International Standard gives models and numerical methods for reliability growth assess-ments based on failure data, which were generated in a reliability improvement programme. These procedures d...

实施日期：2004-09-02

BS ISO 9707-2008

Information und Dokumentation. Statistik zur Herstellung und Vertrieb von Büchern,Zeitungen,Zeitschriften und elektronischen Publikationen Information and documentation. Statistics on the production and distribution of books,newspapers,periodicals and electronic publications Information et documentation. Statistiques relatives. la production et. la distribution de livres,de journaux,de périodiques et de publications électroniques

实施日期：2008-09-30