HB 7763-2005

航空发动机用等轴晶铸造高温合金锭规范

Specification of master superalloy of polycrystalline castings for aeroengine

适用范围： 本规范规定了航空发动机用等轴晶铸造高温合金锭的要求、质量保证规定和交货准备等。 本规范适用于真空感应熔炼的等轴晶铸造高温合金锭（以下简称合金锭）。

发布日期：2005-12-26  实施日期：2006-05-01

EN 3475-705-2005

Aerospace Series. Cables,Electrical,Aircraft Use. Test Methods. Part 705:Contrast Measurement

实施日期：2005-10-01

DIN EN 2536-1995

航空和航天.铝合金的硬阳极氧化

Aerospace series - Hard anodizing of aluminium alloys; German version EN 2536:1995

BS M 32-1969

Specification for dimensions of aircraft accessory drives and mounting pads

DIN EN 4416-2007

Aerospace series - Non-metallic materials - Textiles - Wide woven fabrics - Technical specification

实施日期：2007-08-01

BS ISO 7689-2008

Luft-und Raumfahrt. Schrauben,mit MJ Gewinde,aus legiertem Stahl,Festigkeitsklasse 1100 MPa. Technische Lieferbedingungen Aerospace. Bolts,with MJ threads,made of alloy steel,strength class 1 100 MPa. Procurement specification Aéronautique et espace. Vis. filetages MJ,en acier alli de classe de résistance 1100 MPa. Spécification d'approvisionnement

实施日期：2008-12-31

NF L21-414-1996

Aerospace series. Rivets, solid, universal head, in heat resisting nickel base alloy ni-P11, cadmium plated, inch based series.

EN 3307-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Threaded to Head,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1 100 MPa (at Ambient Temperature)/315 Degrees C

实施日期：1996-09-01

NF L55-050-050-2010

Aerospace series - Lamps, incandescent - Part 050 : lamp, code 1064 - Product standard.

ISO 7961-1994

航空与航天 螺栓 试验方法

Aerospace -- Bolts -- Test methods

适用范围：Specifies the following test methods: tensile test at ambient temperature, double shear test, tension fatigue test, stress durability test at ambient temperature, inspection for grinding burns, tensile...

发布日期：1994-02-01  实施日期：1994-02-01

DIN EN 3506-2003

航空和航天 耐热合金热轧板 厚度2.0mm≤a≤100mm 尺寸

Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm <kleiner => <(kursiv)a> <kleiner => 100 mm; dimensions

适用范围：The document specifies the dimensions and tolerances of hot rolled sheets and plates, in heat resisting alloys thickness 2,0 mm <kleiner => a <kleiner => 100 mm, for aerospace applications.#,,#

DIN EN 3961-2002

航空和航天.金基合金AU-B40001.钎焊用填充金属,滚压箔

Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing,rolled foil

DIN EN 2467-2008

Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0, 4 mm≤a≤20 mm - 520 MPa≤Rm≤670 MPa

实施日期：2008-10-01

DIN EN 2076-3-1990

航空航天.铝.镁合金铸件和铸锭.交货技术条件.第3部分:试制铸件和连铸件

Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 3: pre-production and production castings; german version EN 2076-3:1989

适用范围：This standard specifies the particular requirements for castings in aluminium and magnesium alloys.

DIN EN 3727-2007

Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Technical specification; German and English version EN 3727:2006

实施日期：2007-04-01

HB 6146-1988

航空高精度液压过滤器 通用技术条件

适用范围：本标准规定了对额定工作压力为21MPa，绝对过滤度分别为1、2、3、4、5μm液压过滤器的一般技术要求。 　　本标准适用于航空高精度液压过滤器及滤芯的新品研制及其批生产和老产品改进、改型。

发布日期：1988-02-03  实施日期：1988-06-30

BS EN 1915-3-2004+A1-2009

Aircraft ground support equipment. General requirements. Vibration measurement methods and reduction

实施日期：2004-11-04

HB 5229-1983

航空用低压缩永久变形氟橡胶

适用范围：标准规定了航空用低压缩永久变形氟橡胶的质量要求，可作为生产和使用部门的检验依据。　　本标准规定的胶料主要用于制造工作于空气，石油基滑油、燃油和液压油，硅酸酯和双酯类合成滑油中的活动和固定密封件。本胶料除具有良好...

发布日期：1983-05-23  实施日期：1983-07-01

ASTM E511-2007

用铜-康铜圆薄片热流量计测量热通量的试验方法

Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil,Heat-Flux Transducer

适用范围：<p>1.1 This test method describes the measurement of radiative heat flux using a transducer whose sensing element <bold>(1,2 )</bold> is a thin circular metal foil. These sensors are often called Gardo...

实施日期：2007-11-01

NF L14-328-2005

Aerospaces series - Aluminium alloy AL-P7010- - T651 - Plate - 6 mm < a < or = 20 mm.