ISO 13486-1-1999

道路车辆 液压制动系统 第1部分:双喇叭口管,螺纹孔,阳螺纹管接头和管座

Road vehicles -- Hydraulic braking systems -- Part 1: Double-flare pipes, tapped holes, male fittings and tube seats

发布日期：1999-09-01  实施日期：1999-09-01

DIN 3852-2-2000

管螺纹连接用螺纹管堵.螺纹孔和管件.带惠氏螺纹的旋塞.结构尺寸

Stud ends, ports, for fittings, valves - Plug screw with Whitworth pipe thread - General outlay of types

NF E49-051-4-2008

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4 : stud ends for general use only with metal-to-metal sealing (type B).

NF E48-050-2-2007

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2 : dimensions, design, test methods and requirements for heavy-duty (S series) stud ends.

HB 0-50-2003

螺纹孔的倒角和环槽

Chamfer and Ring Groove of Thread Hole

适用范围：本标准适用于任何公制螺纹螺纹孔的倒角和环槽。

发布日期：2003-09-25  实施日期：2003-12-01

DIN EN 4051-2003

航空和航天 60°球面钛合金制管连接套筒 位连接

Aerospace series - Pipe couplings, 60<Grad>, spherical, in titanium alloy - Port connection

适用范围：The document specifies the characteristics of port connections 60?spherical in titanium alloy for aerospace applications. It ist applicable to 60?spherical tube coupling in titanium alloy defined by EN...

ISO 9974-4-2006

通用和液压传动用联接件 带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头 第4部分:外六角和内六角螺栓的尺寸、设计、试验方法和要求

Connections for general use and fluid power ports and stud ends with iso 261 threads with elastomeric or metal-to-metal sealing. Part 4:Dimensions,design,test methods and requirements for external hex ...

适用范围：This part of ISO 9974 specifies dimensions and performance requirements for metric external hex and internal hex port plugs for use with ISO 9974-1 ports.Port plugs in accordance with this part of ISO ...

实施日期：2006-05-15

EN ISO 9974-1-2000

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing. Part 1:Threaded ports ISO 9974-1:1996

实施日期：2000-05-01

DIN 974-1-2008

Diameters of counterbores - Manufacturing dimensions - Part 1: Hexagon socket head cap screws and screws with cheese head or pan head

实施日期：2008-02-01

NF E48-050-3-2007

Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3 : dimensions, design, test methods and requirements for light-duty (L series) stud ends.

DIN 3852-1-2002

管螺纹连接用螺纹管堵、螺纹孔和管件.第1部分:米制细牙螺旋塞.结构尺寸

Studs ends,ports,for fittings,valves - Part 1: Plug screw with metric fine pitch thread - General outlay of types

适用范围：The document applies to dimensions and designations of stud ends for fittings, valves and plug screws and the corresponding ports. This part gives requirements for types with metric fine pitch thread.#...

ISO 1179-2-2013

Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

发布日期：2013-10-22  实施日期：2013-10-22

DIN EN ISO 1179-4-2008

一般用途和液压传动的连接件 带有合成橡胶或金属对金属密封的ISO 228-1螺纹端口和螺柱端 第4部分:通用仅带金属对金属密封的螺柱端（B型）

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing ...

适用范围： This part of ISO 1179 specifies dimensions, performance requirements and test procedures for stud ends with ISO 228-1 threads and metal-to-metal sealing for general use only. These stud ends should no...

实施日期：2008-08-01

BS EN 4550-3-2003

管连接件37度 设计构型 英制 第3部分 管连接件

Luft-und Raumfahrt. Rohrverschraubung 37 Konstruktionsblatt. Inch-Reihe. Einschraubloecher Pipe coupling,37 degree Design configuration Inch series Part 3:Port connections Serie aerospatiale. Systeme d...

适用范围：This standard defines the dimensions and tolerances for the port connection of inch series pipe couplings, 37° for aerospace applications. Matched fluid system component shall have a port end in accord...

实施日期：2003-02-06

NF E49-052-2005

Pneumatic fluid power - Connections - Ports and stud ends.

DIN ISO 7320-1996

航空和航天.流体系统.管接头、螺纹和密封

Aerospace - Couplings, threaded and sealed, for fluid systems - Dimensions (ISO 7320:1992)

适用范围：The document establishes a system for sealing the port connection of couplings used in the aerospace industry. It specifies dimensions to achieve interchangeability of the port connection, the fitting ...

BS EN ISO 1179-2-2008

Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

实施日期：2009-02-28

ISO 4038-1996

道路车辆 液压制动系统 单喇叭口管、螺孔和阳螺纹接头和软管管接头

Road vehicles -- Hydraulic braking systems -- Simple flare pipes, tapped holes, male fittings and hose end fittings

适用范围：Specifies the essential dimensions and physical characteristics for metallic pipes, pipes with single flares, tapped holes, male fittings and hose end fittings used in hydraulic braking systems for roa...

发布日期：1996-02-01  实施日期：1996-02-01

EN ISO 1179-2-2008

Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Part 2:Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

实施日期：2008-04-01

DIN EN ISO 1179-2-2008

一般用途和液压传动的连接件 带有合成橡胶或金属对金属密封的ISO 228-1螺纹端口和螺柱端 第2部分:重型（S系列）和轻型（L系列）带合成橡胶密封的螺柱端（E型）

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends w...

适用范围：This part of ISO 1179 specifies dimensions, performance requirements and test procedures for heavy-duty(S series) and light-duty (L series) stud ends with ISO 228-1 threads and the elastomeric sealing ...

实施日期：2008-08-01